Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 474. (Read 703113 times)

Thanks for the feedback. A few comments:

* Keccak is supported, but called SHA-3 (another name for the same algorithm). You can also add any other algorithm from zpool or Mining Pool Hub in Awesome Miner, via Options dialog Online Services, even if it's not included in Awesome Miner by default.
* The round-robin style of mining is possible to setup manually using the rules, with Time trigger and Apply template actions. However, I do see your point in making it easier to setup.
* Skunkhash is also supported, and it works with Ccminer out-of-the-box. Any other mining software that support it can be configured for it via Options dialog, Managed Software section

When adding custom Online Service pools, it can also be required to set the correct profit factor - as the pools can report this differently depending on algorithm.
In Options dialog, Online Services section, please edit your custom entry and set profit factor to 0.001 for example (if it's about MH/s vs GH/s related)

Hi,
Is this about adding your own custom pool to the profit switcher? That's fully supported as long as Awesome Miner knows the profit of the pool/coin you are mining on. Please add the pool in Awesome Miner via the Options dialog, Pools section. Then you can go to Options dialog, Profit switching section and specify it as a "Custom Pool".

This miner must manually be configured to allow API connections, and depending on firmware version, it can be different password.

Please see instructions below for Innosilicon A4+:
****
Enter Username : root
Enter Password : innot1t2

telnet to your Miner IP and port 8100 ( no ssh )
edit file /home/inno_py/inno_config.py
value gInnoInitCmdStr at the end of that line replace "--api-listen" with "--api-listen --api-network --api-allow W:0/0"
reboot

****
For later firmware versions, the password for A4+ is: t1t2t3a5

If none of these passwords works, you need to reach out to Innosilicon and ask them what the password is for your specific firmware version.

In the past Innosilicon miners was much easier to work with, but now they are unfortunately making it complicated to allow applications to monitor them.

Please see this guide:
http://www.awesomeminer.com/help/addalgorithm.aspx

You are running a too old version of Awesome Miner. Zpool changed their reporting of SHA-3 (Keccak) a number of weeks ago, and later versions of Awesome Miner adjusted to that. Please use a later version of Awesome Miner and the profit figures will look normal again.

Awesome Miner version 4.2.9
- Managed Profit Switching: For each Online Services entry, the password field can be configured to select payouts in other coins than Bitcoin
- AHashPool.com pool added to profit switcher
- GranatGas pool removed from profit switcher (due to instability)
- Moved setting to enable pool configuration via the web interface from the Security section to the Web section to make it available for Professional Edition and above
- Link to the GPU troubleshooting guide from the Diagnostics dialog
- Claymore Cryptonight Miner 11.0
- DSTM Zcash Miner 0.5.7
- Minor corrections

A note about payout options for Zpool and similar pools. In the past it was only possible to pass custom command line via the properties of the Online Services. The drawback was that although "-p c=LTC" command line worked on some mining software, other mining software had different names of the password parameter. With this release a field for Password is introduced in the Online Service configuration, where you can enter "c=LTC" and Awesome Miner will pass it to the mining software using the correct name of the password parameter.

I've been a away a number of days over the Christmas period so I will read up on the latest questions here and give try to provide answers. Some questions I've already answered by mail, so it might look like I ignore some when it's in fact answered already. Also, if I missed any questions that still needs an answer, please remind me later on.

Thanks and Merry Christmas to everyone!

Screw it, I'm scraping the pool. Its inaccurate and wasting my electricity. For future readers, avoid mining Keccak unspecified. Its profits per day are wrong on A/M and nobody seems to care.

Hello,

is there any way how to add algorithm "yescrypt" ?
I have got ccminer with support of this algo (not included in a/m), but i am not able to learn awesome miner to use this external library.

Thanks for all folks

I am South African so our currency is ZAR and for some reason it says the profit is R4500 per day ($361)?!

Starting Diagnostics. Awesome Miner version: 4.2.4
Starting Mining Software
Setting up Miner Engine. Instance: 7
Engine Type: CcMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Added rule for: C:\Users\walte\AppData\Local\AwesomeMiner\ccminer-2.2.2_7\ccminer-x64-2.2.2-cuda9\ccminer-x64.exe
C:\Users\walte\AppData\Local\AwesomeMiner\ccminer-2.2.2_7\ccminer-x64-2.2.2-cuda9\ccminer-x64.exe  -a keccak -o stratum+tcp://keccak.mine.zpool.ca:5133 -u 1Q5ZWrHi4s9JkBaMzdGBjmxkJsBYoGhwTF -p x -b 0.0.0.0:4034   (WindowMode: ConsoleFormat, EngineType: CcMiner, IsProfitMiner: False)
Configuration:

Mining Engine Process started, PID: 13120

====================================================================================================
> *** ccminer 2.2.2 for nVidia GPUs by tpruvot@github ***
>     Built with VC++ 2013 and nVidia CUDA SDK 9.0 64-bits
>
>   Originally based on Christian Buchner and Christian H. project
>   Include some kernels from alexis78, djm34, djEzo, tsiv and krnlx.
>
> BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)
>
> [2017-12-27 09:43:21] Starting on stratum+tcp://keccak.mine.zpool.ca:5133
> [2017-12-27 09:43:21] NVML GPU monitoring enabled.
> [2017-12-27 09:43:21] NVAPI GPU monitoring enabled.
> [2017-12-27 09:43:21] 1 miner thread started, using 'keccak' algorithm.
> [2017-12-27 09:43:22] API open to the network in read-only mode on port 4034
> [2017-12-27 09:43:33] Stratum difficulty set to 32 (0.25000)
> [2017-12-27 09:43:33] keccak block 2326883, diff 4265.127
> [2017-12-27 09:43:34] GPU #0: Intensity set to 21, 2097152 cuda threads
> [2017-12-27 09:43:34] GPU #0: Gigabyte GTX 1080 Ti, 72.35 MH/s
> [2017-12-27 09:43:38] GPU #0: Gigabyte GTX 1080 Ti, 1048.95 MH/s
> [2017-12-27 09:43:39] accepted: 1/1 (diff 0.716), 945.60 MH/s yes!
> [2017-12-27 09:43:40] accepted: 2/2 (diff 3.744), 954.37 MH/s yes!
> [2017-12-27 09:43:40] accepted: 3/3 (diff 0.278), 954.37 MH/s yes!
> [2017-12-27 09:43:40] accepted: 4/4 (diff 1.764), 954.37 MH/s yes!

====================================================================================================
Stopping miner process ...
Stopping Mining Software
Diagnostics completed


https://imgur.com/a/ZIBRu


As you see the coin is unspecified, suggestions?

Find out the IP address of your ASIC, and make an external miner to point to that IP address.  Find out which mining software that the A4+ uses and tell AM to use that as the mining software.  This is important so AM knows how to interpret the API data coming from the ASIC.

I don't use claymore anymore for cryptonight.  Have you tried using Cast-XMR which is built into Awesome Miner?

Can you give us some more information here?  Can you run the diagnostics and post the results?

In the options go to the Algorithms section.  Add X17 there... give it some estimated numbers for hashrate and power.

Then in the Online Services section, add the zpool parameters for X17 under the user defined online services section.

Make sure in the Options on the Profit Switching section the "Select BTC payout (c=BTC) for zpool.." is not ticked.  Then on your managed profit miner, use the command line parameters put in the

-p C=XXX

where the XXX is the code of the coin you wanted Zpool to convert to.

New Feature Request:

Would be great to have an option to "override" or "HOLD" managed/profit miners for a period of time.   This would allow a temporary hold so managed profit miners stay on the same coin/pool for period of time--say 1, 2, x hours.   Then after this temporary hold, would resume with normal recalculated profit switch interval.

Hello,

please look at profitability calculator at zpool and algorithm "Blakecoin"
In online services show amount about 5€ and when I start to mine, shows me in miners view amount about 14000€.

http://ibb.co/cueX6b
Thanks

First post on here, but have used Awesome Miner for about a week now, and it is awesome as the name suggests. Thank you to the developer, I love it.

Just a few feature requests though, if I may make some suggestions for a future release?

* Show calculated profit in the dark tables in the dashboard - this could be in the Revenue section.
* Option to use data from https://walletinvestor.com/forecast to see which of the current coins are most likely to be profitable long-term and perhaps have an option to take that into account - though this is speculative
* Support for miners and profitability calculation for other algorithms, such as Keccak, and others.
* Add support for brand new coins, with the ability to add those into Awesome Miner, with or without profit calculations, but still allowing these to be mined in a round-robin style (for future investment) - i.e. to have the option to pick a bunch that A/M will just switch through, ignoring any profit.
* Add support for Skunkhash - I see the algorithm in Awesome Miner, but no miner to call on to do the mining.
* Add ability to pass the information from the Coins tab to Mining Pool Hub or other multipool with the p=COIN option - to force coin selection based on Awesome Miner's Coin tab profitability calculations - sidenote: this also helps avoid the problem of having "Unspecified algorithm coin" in the Miner window, as this will be selected by A/M.

Bug:

* sgminer and -gm do not play nicely with my Radeon R9 280X and do not start mining at all with Blake2b or NeoScrypt.

Awesome

Recently I noticed a problem or a bug:
I have 3 rigs in one place with one internet connection
and 1 rig in another place with different internet connection

all rigs are same in configuration
but the profit calculator shows me different numbers although i have put same settings for statistics

different bitcoin price in footer
different profit for MPH (see equalhash)
different BTC / GH / day in MPH stats
http://pixs.ru/showimage/Snimokekra_8012158_28799520.png

settings on rigs
http://pixs.ru/showimage/Snimokekra_7391456_28799526.png

settings for statistics on all rigs
http://pixs.ru/showimage/Snimokekra_4272337_28799539.png

because of that problem all rigs don't do ONE work
3 rigs are mining 1 algo
and 1 always mine some different algo on another pool