Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 475. (Read 703396 times)

Can you give us some more information here?  Can you run the diagnostics and post the results?

In the options go to the Algorithms section.  Add X17 there... give it some estimated numbers for hashrate and power.

Then in the Online Services section, add the zpool parameters for X17 under the user defined online services section.

Make sure in the Options on the Profit Switching section the "Select BTC payout (c=BTC) for zpool.." is not ticked.  Then on your managed profit miner, use the command line parameters put in the

-p C=XXX

where the XXX is the code of the coin you wanted Zpool to convert to.

New Feature Request:

Would be great to have an option to "override" or "HOLD" managed/profit miners for a period of time.   This would allow a temporary hold so managed profit miners stay on the same coin/pool for period of time--say 1, 2, x hours.   Then after this temporary hold, would resume with normal recalculated profit switch interval.

Hello,

please look at profitability calculator at zpool and algorithm "Blakecoin"
In online services show amount about 5€ and when I start to mine, shows me in miners view amount about 14000€.

http://ibb.co/cueX6b
Thanks

First post on here, but have used Awesome Miner for about a week now, and it is awesome as the name suggests. Thank you to the developer, I love it.

Just a few feature requests though, if I may make some suggestions for a future release?

* Show calculated profit in the dark tables in the dashboard - this could be in the Revenue section.
* Option to use data from https://walletinvestor.com/forecast to see which of the current coins are most likely to be profitable long-term and perhaps have an option to take that into account - though this is speculative
* Support for miners and profitability calculation for other algorithms, such as Keccak, and others.
* Add support for brand new coins, with the ability to add those into Awesome Miner, with or without profit calculations, but still allowing these to be mined in a round-robin style (for future investment) - i.e. to have the option to pick a bunch that A/M will just switch through, ignoring any profit.
* Add support for Skunkhash - I see the algorithm in Awesome Miner, but no miner to call on to do the mining.
* Add ability to pass the information from the Coins tab to Mining Pool Hub or other multipool with the p=COIN option - to force coin selection based on Awesome Miner's Coin tab profitability calculations - sidenote: this also helps avoid the problem of having "Unspecified algorithm coin" in the Miner window, as this will be selected by A/M.

Bug:

* sgminer and -gm do not play nicely with my Radeon R9 280X and do not start mining at all with Blake2b or NeoScrypt.

Awesome

Recently I noticed a problem or a bug:
I have 3 rigs in one place with one internet connection
and 1 rig in another place with different internet connection

all rigs are same in configuration
but the profit calculator shows me different numbers although i have put same settings for statistics

different bitcoin price in footer
different profit for MPH (see equalhash)
different BTC / GH / day in MPH stats
http://pixs.ru/showimage/Snimokekra_8012158_28799520.png

settings on rigs
http://pixs.ru/showimage/Snimokekra_7391456_28799526.png

settings for statistics on all rigs
http://pixs.ru/showimage/Snimokekra_4272337_28799539.png

because of that problem all rigs don't do ONE work
3 rigs are mining 1 algo
and 1 always mine some different algo on another pool

Is there a monacoin blockexplorer api for awesome miner?
I'd like to add monacoin to my list of account balances in Awesome Miner's balance tab

For blockexplorer there's
https://mona.chainsight.info/address/[address]
https://bchain.info/MONA/addr/[address]

But these aren't API results so, don't know how to get a working solution for Awesome Miner to interpret.

Minor thing.... In cloud service on Notifications page:

"Desription"  --> should be "Description"

Sorry for being an Ant F*cker, as we call it in the Netherlands... 

So im having a bit of trouble here with minersoftware settings:

When i put commandline parameters (-allpools 1) in a managed template, it wont get picked up bij the minersoftware (Claymore Cryptonight v11). The same when i put it in the poolsettings settings/value field. its get ignored bij the minersoftware.

commandline params only are getting used bij miningsoftware when i put it directly in the managed miner properties. (wich are not getting saved in the applied template settings but are completely seperate set of settings correct?)


Then there is a  problem with the adress it seems. i made a pool on electronium, using my https://my.electroneum.com/ adress.  Claymore gives me a "invalidadressusedforlogin".

 anyone know how to solve this?

Region variable does not get passed... Had to add us-east manually to be able to connect.

https://preview.ibb.co/b6htc6/zcoin.png

Hi Patrike,

Suggestions/request Please...:
- Add ahashpool.
- Add more miners (AMD & Nvidia) for all pools esp: zpool,ahashpool,hashrefinery. Some algos/coins are not available currently. trying to add my own have success and failure. for example: trying to add skein algo in AMD using sgminer 5.3.1 has failed, some how file "awesomeminer.conf" overwrite my params.
- Enhance benchmark results by saving "running average" benchmark results as it mines.
- Switch algo after the block is just found. for pools with PPLNS system, like MPH.
- Create its own 24h/12h/6h running avg for coins prices if pools don't provide, like MPH, nicehash. This could be more accurate such that it can replace data from pools that provide 24h avg. Tuning on how you average them is key... this needs many tests tho.

Thus, Awesome Miner ---->  The Ultimate Miner.    

Why is it that when I mine Keccak or SHA-3. that the readings I get using my GTX1080ti is false. I plus this pool passes the 1GH threshold but tells me I earning ALOT but not giving the estimate. Can someone please shed some light on this for me please?!

This has probably been asked sometime ago so apologies for not being able to find it. Anyway, how can I add the x17 Algo in awesome miner for zpool? I have added it but somehow when I try to run a benchmark it just would not start (using different miners). Can anyone shed a light? Thank you.

For profit switching on Zpool.

I see you can add c=BTC and take it away, but is there a way to change the c= to any other coin? The post says pool side but I dont see how to do that pool side, and I also can't set the c= in a password field in the profit profile.

You can set it to ETH payout on the pool side.

You can get paid out in ETH at MPH but I think zpool and hashrefinery do not support ETH. I think they only support coins they mine.

How can i set every bitcoin payout to eth payout? c=eth. where can i set that ?

SUGGESTION:

The dashboard with graphs of the hashrate is really no use to me because I do profit switching and it is always changing.

What would be MUCH more useful to me is a graph of the profit. actual and estimate.

Actual would get from pool APIs
https://miningpoolhub.com/index.php?page=api&action=getuserallbalances&api_key=APIKEY
https://api.nicehash.com/api?method=balance&id=XXXX&key=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
http://www.zpool.ca/api/wallet?address=WALLET_ADDRESS
http://pool.hashrefinery.com/api/wallet?address=WALLET_ADDRESS


YIIMP pools would use "balance"
Nicehash would use "balance_pending" +"balance_confirmed"
MPH would use coin":"bitcoin","confirmed"


Estimated would be a graph of the already used "profit"

Do you use a trigger like this:

Accepted (5 minutes ago) Equals 0

Hi Patrike, 3 question:
1 - Any updates about linux version?
2 - Is there any possibility to put the temp limit variable in awesome miner? would be awesome set max temp and automatic fan.



3 - I'm mining Zencash, but AM don't show me the "total per day" if i set in the pool setings Worker name: myaddress.[ComputerName]

When the miner start it show me:


But after some second it show Unspec. Equihash


It's all ok if i set in "worker name" only address and set [ComputerName] in miners properties