Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 480. (Read 703396 times)

For ccminer you will never be able to get anything but "Basic API". That's just a way for Awesome Miner to inform that an API is available, but that it's quite limited compared to what cgminer/sgminer/bmminer API can do.

Thanks for your feedback on this. I do have a few algorithms that I'm planning to add soon, so I can include this one as well. As pointed out above by others above, it's possible to add your own algorithms, and also make them work with zpool.

There is a guide here, although it also covers more advanced topics like using "unsupported" mining software for new algorithms.
http://www.awesomeminer.com/help/addalgorithm.aspx

"The system cannot find the file specified" indicates that Awesome Miner downloaded the mining software, but when it was about to start, your anti-virus software removed it already. If you go to the folder: C:\Users\shannon\AppData\Local\AwesomeMiner\ccminer-2.2.3_1\ccminer-x64-2.2.3-cuda9\
You will probably see that the ccminer binary is missing.

Example of how you can configure exclusions in Windows Defender:
http://www.awesomeminer.com/help/defender.aspx

Hi,
If this is about the Antminer L3 web interface, then it sounds a bit strange. It's not at all related to Awesome Miner. Awesome Miner is only connecting to the cgminer/bmminer process on the Antminer - not the web interface.

Awesome Miner will setup the wd and r parameters for you, so there is no need to modify them.  In fact, the parameters Awesome Miner set is to get the correct behavior of Claymore so it doesn't restart itself - Awesome Miner should do that instead.

"Dead device" is only reported by some mining software. Another trigger that can be of interest here is the Device Count trigger.

Thanks for the feedback.

I do get a number of requests on xmrig and ahashpool support, so these are for sure candidates for the next few versions.

Benchmarking can of course be improved, but benchmarking individual cards actually gives more flexibility if you have a large number of miners. If you have 7 GPU's in one system and 8 of the same in another, I don't know if benchmarking the two systems would give anything compared to benchmarking a single GPU and then just specify how many you have like today?

options/statistic - you can choose 24 hour average. the profit will be more "smooth" and profit manager won't switch that much. on the other hand you might have fewer earnings (perhaps even more?)

My best suggestion is make a notepad file and mark every hour what you've made so far. Do this for like a few days and then you'll be able to see how much you really make a day.

Hello everyone, I have been using Awesome Miner for a little over a week now and am loving it so far. I am obsessed with watching the revenue on the dashboard on my phone, but had one quick question.

Recently (last day or two) I noticed that the revenue seems to be all over the place. One minute it says about $150 a month when the next minute it says has high as $1,800. Is this normal? Is there anything I can do to get a more accurate estimate?

I am mining with an GTX 1080 and have the most recent update to AM. Thank you in advance!

Used to use Nicehash but came across Awesome miner on a another forum and never looked back since! Been making 3-5X more a month then what that ripoff of a site gave me.

Still learning most of the ropes. Just got a question concerning unspecified coins vs and specified coins.

Sometimes unspecified coins give a much high profit per day as specified coins. Just how accurate is it when it says this? If anybody can shed some light for me on this I'd be so happy.

Alright. Sold. i'm switching all my mines to Awesome miner.

It would be nice if awesome miner worked with SRR. does it?

you can add algorithms by yourself
- options/algorithms add - give proper name
- options/managed software - example ccminer, enable the new algo, set user defined command line argument ("myr-gr" in your case without quotation marks)
- options/online service - add an entry for your pool, example zpool: http://fs1.directupload.net/images/171220/8ysgbiev.png
- run benchmark for your new algorithm

done. algorithm should be listed at online services. I had to restart awesome miner before profit switching worked with newly added algorithms.



you can use the profit factor

http://fs1.directupload.net/images/171220/jhk8b4ju.png

0,98 = 1,00 - 2% fee (zpool fee)

for MH you have to calculate your percent (depends on payout/fixed fee)

Hi! Is there a way to tell AM to subtract the miner and pools fees from the earning statistics? For example, AM says that I'm earning $21,72 daily with MPH. But (correct me if I'm wrong) that doesn't account to the 0.9% pool fee plus the 0.2% fee deducted from exchange. It also doesn't account for the miner fee of moving BTC to my wallet. It would be useful to be able to add a manual fee % that AM will deduct from the earning calculations.

I am using AwesomeMiner to run 3 ASIC miners (s9, L3+ x2), and 3 GPU rigs (8x AMD470, 8x 1070, 6x 1060). Each of the GPU miners are running on ethOS and the AMD machine is running sgminer-gm 5.5.5-gm-a and the two NVIDIA miners are running ccminer 2.2.2-mod-ethos4.

My question is regarding basic vs privileged API access. The AMD rig and ASIC are all working as intended with privilege enabled, however, I am having some issues with ccminer.

I have the following flag entered into the code in ethOS (based on Ubuntu for those not aware):

-a skein -b --api-remote --api-bind=4068 --api-allow=0/0

This is allowing "basic" access, however, based on my interpretation of the API documentation, this should be allowing for full privileged access.

Anyone that has knowledge of this and and can way in?

Thank you in advance for the help!

really need to add myr-gr

hey guys idk if anyone watches this thread but ive been having some problems setting up my awesome miner and am not finding anyone else with this issue, first of all I am wondering if I need to predownload all the mining software like ccminer 2.2.3 and other software or will it automatically download and use this software for me? I am able to mine on miningpoolhub setting with auto profit switching but as soon as I click the box to add zpool or hashrefinery it stops my awesome miner from working at all.. until I disable all but miningpoolhub.


Starting Diagnostics. Awesome Miner version: 4.2.6
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: CcMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Added rule for: C:\Users\shannon\AppData\Local\AwesomeMiner\ccminer-2.2.3_1\ccminer-x64-2.2.3-cuda9\ccminer-x64.exe
C:\Users\shannon\AppData\Local\AwesomeMiner\ccminer-2.2.3_1\ccminer-x64-2.2.3-cuda9\ccminer-x64.exe  -a lyra2v2 -o stratum+tcp://hub.miningpoolhub.com:17018 -u (my wallet address and username is inserted here) 0.0.0.0:4028   (WindowMode: ConsoleFormat, EngineType: CcMiner, IsProfitMiner: True)
Configuration:

Failed to start miner process: The system cannot find the file specified
Failed to start miner in Diagnostics mode
Diagnostics completed





thanks for any help

L3 Antminer locked out 401 unauthorized error even with default credentials

If I delete the Miner from awesomminer I am able to login.

Please help

@puwaha here they are:
https://preview.ibb.co/f4ofjm/Capture.jpg
https://image.ibb.co/mapmPm/Capture2.jpg
https://preview.ibb.co/fuOKc6/Capture3.jpg

great tool, working nearly perfect for several days now

heres my wishlist:

- add xmrig cpu miner (https://github.com/xmrig/xmrig)  + api compatibility (much faster cryptonight)
- option to use more then one gpu for benchmark
- cloud service on mobile phone: gpu clock/power is missing (desktop version is fine, just missing on mobile)
- add ahashpool and yiimp.eu for easy use (instead of having it to build myself)

Thanks

You could use a hardware watchdog like this - https://www.ebay.co.uk/itm/USB-Watchdog-Timer-Card-Module-Automatic-Restart-IP-Electronic-for-Mining-PC/173018475361?hash=item2848b46b61:g:QfMAAOSwjM5aIRX9
Just resets the PC if it doesn't get a USB signal for a certain time.