[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 494.

MrFriendly

newbie

Activity: 10

Merit: 0

Quote from: rageprone on December 10, 2017, 08:00:30 PM

I couldn't find a single post dealing with GPU rigs which have both nVidia and AMD cards. I have tried again and again to add a profitability miner but it never detects all the cards. I have2x 1080ti, 2x 1050ti and 1x RX570.

I click on new Miner > managed profit miner > select nVidia GPU (for profit switching profile)

This shows all the 4 nvidia cards (sometimes). Then I add another managed profit manager and select AMD GPU and it will show the 1x RX570 sometimes or mostly it just shows 'interface offline'. The help document isn't very helpful for a software which cost me $70.

Can anyone help me configure my "awesome" miner, please?

I might be wrong...but I think you need to add a second profit miner, which is focused on AMD. then youll have two...one nVidia and one AMD.

for proper management, because you have so many GPU, you may need to purchase the standard or pro version of the AM client.

soothaa

hero member

Activity: 1151

Merit: 528

Quote from: JohnnyDoeTheSecond on December 10, 2017, 06:23:21 PM

I tried a lot of things to make your software works. It would never connect.

If you remember, I emailed you screenshots, and then you ran away crying like a little girl.

You and your software are dismissed.

I reaalllyyy wish Bitcointalk had a feature where I could ignore all posts by Newbies.

CreamyG31337

member

Activity: 113

Merit: 10

I have a rig with 5 cards -- 2 AMD RX cards and 3 VEGAs.
It's impossible to map them to system monitoring properly.
The RX managed miner shows 5 cards, 2 disabled. Fine. Those map.
The Cast XMR managed miner shows 3 cards, but you can't map them to the VEGAs. You always end up with 1 RX card and 2 VEGAs.

rageprone

newbie

Activity: 28

Merit: 0

I couldn't find a single post dealing with GPU rigs which have both nVidia and AMD cards. I have tried again and again to add a profitability miner but it never detects all the cards. I have2x 1080ti, 2x 1050ti and 1x RX570.

I click on new Miner > managed profit miner > select nVidia GPU (for profit switching profile)

This shows all the 4 nvidia cards (sometimes). Then I add another managed profit manager and select AMD GPU and it will show the 1x RX570 sometimes or mostly it just shows 'interface offline'. The help document isn't very helpful for a software which cost me $70.

Can anyone help me configure my "awesome" miner, please?

poby

full member

Activity: 258

Merit: 104

How do I specify an ssl stratum connection for a pool?

JohnnyDoeTheSecond

newbie

Activity: 24

Merit: 0

I tried a lot of things to make your software works. It would never connect.

If you remember, I emailed you screenshots, and then you ran away crying like a little girl.

You and your software are dismissed.

onyx369

newbie

Activity: 11

Merit: 0

Question for Devs or Pros,

So I was fooling around with the Rules settings. I have a number of AntMiners and yes they were OC`d to the tits by Bitmain and tend to go offline from time to time(xxxoxxxo) . I elected to buy Awesome Miner to monitor my machines (instead of updating the firmware, as the new firmware are even more buggy).

Right... so I changed the Rules sections and added a new rule to `highlight in red`the dead miner, before it reboots the dead miner. Now all my miners are permanently Red highlight :-)...

1. I`d love any ideas as to how to remove the Red Highlight (automatically) once the system detects that the Miners are back on line.

2. I have a stack of D3s and L3+s on my home network... and Awesome Miner finds them just fine. I also have a GPU running SMOS (DSTM/Zen)...my router confirms that it is 192.168.0.254... and it mines just fine... but Awesome Miner can't seem to auto scan/locate it. ANy ideas folks?

Thanks for any insight folks

Onyx

MrFriendly

newbie

Activity: 10

Merit: 0

puwaha,

can you point out to any guide on creating a custom pool with profit switching? it sounds like that might be one the better ways to go about GPU mining...with a focus on the algorithms they excel at in the pools that use them?

or am I off? I've got 8x GTX 1070's going and plan on getting 5x AMD 4xx/5xx GPU's shortly for my H110 Pro BTC+ mobo. I was a victim of the NiceHash hack, though I only lost my due payout of $90 USD, as I did use a third party wallet. now I'm trying to figure out all this new stuff, which is a wee bit more complicated.

thank you for your assistance!

Quote from: puwaha on December 10, 2017, 04:49:53 PM

You will need to setup every algo from ahashpool as an individual pool in AM, then group them together using a pool group. Then you can use the Custom Pool option in the profit switching and select this new pool group.

I did this for all the Suprnova pools... its a little time consuming, but worth it in the end.
[/quote]

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: UpWind on December 10, 2017, 02:46:51 PM

Hi, can you please share how to add this pool to awesome miner? I couldnt decide what to write to or sections in pool address (below), when entering the pool to AWM.

-o stratum+tcp://.mine.ahashpool.com: -u [-p ]

Quote from: Jaerin on December 10, 2017, 12:58:03 AM

My ahashpool wallet:
https://www.ahashpool.com/wallet.php?wallet=1Q3HQdXLuiTpmgZo9Mt24Bomee8HyiWRsv

whattomine.com for the same:
https://[Suspicious link removed]/ycggbgr5

And actually that isn't a full time with my 1080Ti because I play game with it and don't usually mine with it 24/7.

You will need to setup every algo from ahashpool as an individual pool in AM, then group them together using a pool group. Then you can use the Custom Pool option in the profit switching and select this new pool group.

I did this for all the Suprnova pools... its a little time consuming, but worth it in the end.

UpWind

newbie

Activity: 28

Merit: 0

Hi, can you please share how to add this pool to awesome miner? I couldnt decide what to write to or sections in pool address (below), when entering the pool to AWM.

-o stratum+tcp://.mine.ahashpool.com: -u [-p ]

Quote from: Jaerin on December 10, 2017, 12:58:03 AM

My ahashpool wallet:
https://www.ahashpool.com/wallet.php?wallet=1Q3HQdXLuiTpmgZo9Mt24Bomee8HyiWRsv

whattomine.com for the same:
https://[Suspicious link removed]/ycggbgr5

And actually that isn't a full time with my 1080Ti because I play game with it and don't usually mine with it 24/7.

umsiddiqui

newbie

Activity: 15

Merit: 0

I am also facing below challenge, can you guys make a video tutorial for setting up antminer, L3+ with couple of famous mining pools, like MPH and zpool. trust me it would help SOO much for beginners and make it easier to start.

Quote from: razorseal on December 09, 2017, 10:33:21 PM

Guys, is there any guide to help me setup AM for miningpoolhub?

I tried to look around and cant find anything...

I did what I think I got right, and I have no idea what it's doing lol.

I added a managed profit miner and then added a 'new pool'... I put the address of the BTG pool address in the URL and then worker name (username.worker) and pass x....

picked the type of coin...

I then clicked start and now it's mining "unknown neoscript" which I believe is feathercoin Huh

I'm so confused. I really want to get this thing running. I primarily want to run equihash, lyra2rev2 and cryptonight for CPU. that's it...

I should be alternating between vertcoin, bitcoin gold, monacoin and monero for CPU...

Help me out please!

Here is a screenshot. I have no idea where that portnumber came from... It's the one for monacoin alright... I don't see it on the dashboard that I'm making anything though?

https://s17.postimg.org/50gyy5yyn/AM_ss.png

also, is there a way to make my CPU work on monero for MPH as a 2nd worker?

edit - it decided to mine groestlcoin which I have no interest in, not to mention, I was just mining monacoin at a day, and now it's doing groestlcoin at a way Huh

puch0021

newbie

Activity: 35

Merit: 0

Question on how to use VertMiner instead of ccminer for lyra. I am using Miningpoolhub and have a managed miners set up. It mines lyra perfectly fine with ccminer, however, I can't find a way to use VertMiner for lyra mining.

I've tried following http://www.awesomeminer.com/help/managedsoftware.aspx but I am unable to specifically use VertMiner instead of ccminer when lyra is called for by awesome miner.

Any tips on where I could be missing the instructions?

taserz

sr. member

Activity: 800

Merit: 294

Created AutoTune to saved the planet! ~USA

We already have profit switching built in.

STSMiner

full member

Activity: 270

Merit: 115

Quote from: taserz on December 10, 2017, 08:50:36 AM

Quote from: STSMiner on December 10, 2017, 08:44:35 AM

Patrike,

Can you add a new pool to Awesome Miner in the next update please.

https://ahashpool.com/

Thanks

that pool has like no hashrate.

The pool has been tested, see 4 or 5 posts up.

I also did a test and it seems OK to me.

taserz

sr. member

Activity: 800

Merit: 294

Created AutoTune to saved the planet! ~USA

Quote from: STSMiner on December 10, 2017, 08:44:35 AM

Patrike,

Can you add a new pool to Awesome Miner in the next update please.

https://ahashpool.com/

Thanks

that pool has like no hashrate.

STSMiner

full member

Activity: 270

Merit: 115

Patrike,

Can you add a new pool to Awesome Miner in the next update please.

https://ahashpool.com/

Thanks

PS .... Please take a look at the link in Options > Profit Switching

https://www.granatgas-pool.info/ << Can not be reached !

bullxrider

newbie

Activity: 3

Merit: 0

Hey guys loving the software and got 2 rigs running perfectly, but my third AMD rig seems to stop between a few hours. I'm not sure why and how would I go about fixing it? Thanks for any help

Not working as in it stops mining and have to restart it with start.

mohicans

newbie

Activity: 21

Merit: 0

Quote from: patrike on December 09, 2017, 07:24:34 AM

Quote from: smartieee on December 09, 2017, 04:19:40 AM

Hi guys,

I'm getting this issue as well, Cast XMR is listed on the Managed Software section but not selectable within the Profit Profiles

Thanks

Quote from: Thekingace on December 09, 2017, 12:11:09 AM

Quote from: patrike on December 08, 2017, 06:19:14 PM

Awesome Miner version 4.2.4

- Cast XMR miner supported as Managed Miner
- New settings for wait time before terminating mining software and delay for auto starting miners on bootup
- Command line and custom exe-file configurable per Managed Profit Miner
- "Remove miner" added to context menu in miner list
- South African Rand added as display currency
- E-mail configuration includes a button for sending a test message
- Disabled Blake2b (sia) on Ccminer
- Correction to Wallet balance list
- Correction to benchmarking

I love you patrike thanks so much for this update

I just have one question, I see cast-xmr in "managed miners" but I can't select it in my profit profiles, how do I make my miners use it for cryptonight?

Cast XMR was introduced as a Managed Miner, but not yet listed as an option for Profit switching. I was hoping to get some feedback on the Cast XMR implementation made so far before I make it available for profit switching as well - because then much more people will start using it.

I guess we'll have to wait awhile till it is implemented on profit miner

Jaerin

full member

Activity: 154

Merit: 100

Quote from: puwaha on December 09, 2017, 08:27:44 PM

Quote from: Jaerin on December 09, 2017, 02:19:23 PM

Quote from: textb0ok on December 09, 2017, 04:24:01 AM

You were correct STSMiner.... After changing the switching interval and the profit switching threshold, I am now seeing what I consider normal functionality.

_________

New Question:

Are any you using zpool and noticing you are not getting paid anywhere close to what Awesome Miner is saying you are earning?

I mined all day and night with my test rig, and Awesome Miner was reporting a profit from $6/day to $18/day....

But on the zpool wallet page, it shows I have earned $3 in bitcoin. Huh

There has been a long time speculation that there is something causing 20% loss of earnings in the exchange process. I discovered that the AverageIncrement function used to create a rolling average of the prices on the exchanges could return 80% of the input values if either of the inputs were 0. I've submitted a bug fix to the Yiimp git, but it has not been accepted yet. Ahashpool.com has implemented the bug fix long ago and I have found that it pays out much better than Zpool. The one drawback is that it does not have near the same number of algorithms and coins available. Specifically the Equihash implementation in Yiimp is private and not shared publicly.

Zpool does still pay out better than what Nicehash used too, but there is an obvious bug that continues to go unfixed. There is a thread where evidence was presented that clearly showed that the exchange rates being given on mined coins was always 15-20% below the expected value at the time of payout. Its a hard discussion to win because everyone seems to doubt the validity and chalks up the evidence as somehow doctored or could be explained away by exchange price fluctuations. Hopefully Crackfoo comes to his senses and implements the bug fix. In fact I think people would be fine paying a 5-10% exchange fee if he were transparent about it. It costs money to run a pool and I don't think anyone expects him to do it for free.

You also have to understand how pools like Zpool work and profit-switching in general. When you mine a coin that is "most profitable" in the moment, many, many rigs get pointed to it through the various profit-switching software and pools that are out there. This raises the difficulty on the coin causing it to slide down the ranks. The coins that you did mine at Zpool (or other services) then get sent to the exchange, where it may not be as profitable as it was when you first mined it. Depending on how fast the coin gets exchanged, it could be worth much less BTC. I have some Nist5 coin that I mined at Zpool that has been at the exchanges for over 2 weeks.

This is why you should never set AM or any profit-switching algorithm to "current" statistics, but 24 hour averages or longer. Coins slide up and down from the top spot constantly, and you are chasing the tail of the spike if you are using current statistics. If you are in it for profit, then you are better off mining coins that average in the top 5, as you want consistent profit.

I know perfectly well how the pool works. And you're right that you are chasing the potential quick profits, but what you also have to realize is when those coins "spike" in profits could be because there is a short term drop in difficult of the coin and therefore your hashing power for that period actually will generate you more of those coins of that type then it normally would. When the difficulty spikes back up to move onto a different more profitable coin. There is usually 2-3 algorithms that it will end up cycling throughout the day. The price fluctuations on the exchanges may also be the reason one coin becomes more profitable over another. It all depends on how things play out. In general though I can say that my hashing power using a program like Awesome Miner or Multipoolminer on a pool like Ahashpool.com far outperforms sticking to a single coin.

As an example I look at whattomine.com and it says for my 7 - 1080's and 1 - 1080Ti based on 7 day difficulty and profitability I should be mining Monacoin and expecting .00253BTC a day. On ahashpool.com in that last 24h I've made closer to .004

My ahashpool wallet:
https://www.ahashpool.com/wallet.php?wallet=1Q3HQdXLuiTpmgZo9Mt24Bomee8HyiWRsv

whattomine.com for the same:
https://tinyurl.com/ycggbgr5

And actually that isn't a full time with my 1080Ti because I play game with it and don't usually mine with it 24/7.

taserz

sr. member

Activity: 800

Merit: 294

Created AutoTune to saved the planet! ~USA

With Awesome Miner C# Script API how can I call on the miner to get it's local ip address or remote host. I am trying to build something so I can use a pre built in trigger and the action requires me to know the ip of the miner on my local network.

This will be a script everyone is going to want so I will post it here once it is done. More so the guys with lots of miners.

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 494. (Read 703113 times)