Hi guys! I have a bunch of iBeLink DM11G with Awesome Miner to control them. When I change the pool via the Awesome Miner software, it works, but until any miner reboot. After rebooting I see the same pool configuration as before any change implemented. Looks like the Awesome miner does not save the new pool configuration.
When I change the pool configuration in the web interface of the miner itself, I have to press "Save configuration" button to really save the new config. Patrick, could you resolve it?
Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 489. (Read 703113 times)
December 13, 2017, 01:53:10 AM
December 13, 2017, 12:03:49 AM
The Electroneum profit calculation is rather strange. This comes from WhatToMine right? AM has always been high on the profit for Electroneum but the percentage gap widens as the WhatToMine profit goes up. For example:
WhatToMine $66
AM $100
WhatToMine $79
AM $142
Any idea why this is?
I don't know exactly why, but WhatToMine calculates with at 35% pool fee (bad luck) on ETN:WhatToMine $66
AM $100
WhatToMine $79
AM $142
Any idea why this is?
https://whattomine.com/coins/213-etn-cryptonight
There's some explanation on Twitter, but I suppose I still can't post links...
https://twitter.com/WhatToMine/status/938078827326201857
effort for last 50 blocks on electroneum.hashvault.pro is 163.58%
50 before that is 98.26 %
50 before that is 110.32%
That's about the last 24 hours.
December 12, 2017, 10:04:33 PM
I apologize if this has been asked before, is there a way to integrate prohashing profitability? Using prohashing since nicehash is offline and can't see profitability.
(for antminers not GPUs)
(for antminers not GPUs)
December 12, 2017, 07:47:12 PM
So I figured out how to get balances to work using addresses instead of public keys. Now, is there anyway to show a Ripple (XRP) balance by using any of the custom settings?
December 12, 2017, 06:58:49 PM
How do you get balances to work? I've exported my public key for bitcoin and dash and added in the Options/Balance area, but neither of them shows anything. The BTC one using blockchain.info shows 0 balance, the Dash one using cryptoid.info shows (Update failed). Any tips on what Explorer API urls work?
December 12, 2017, 05:44:47 PM
Patrike, is there any way to change miner type from Managed Miner to Managed Profit Miner and back? Some tips?
It would be extremely helpful.
That is not unfortunately not possible. For a Managed Miner you can use template to switch between different configurations in an efficent way, but the Managed Profit Miners are a bit too different for this concept to work.It would be extremely helpful.
Right now, i need to remove miner and create needed after that, with the same IP address and worker name . So i'm loosing all history and settings. It doesn't make sense.
December 12, 2017, 05:27:59 PM
anyone have a resource that can help me understand using an Antminer D3 for DASH?
Hi,Is there anything specific or just general information how to get started? This is probably a good starting point:
http://www.awesomeminer.com/help/externalwizard.aspx
Also, make sure you configure the Antminer for Privileged API access in order to enable operations like changing pool:
http://www.awesomeminer.com/help/antminerapi.aspx
December 12, 2017, 05:26:33 PM
Patrike, is there any way to change miner type from Managed Miner to Managed Profit Miner and back? Some tips?
It would be extremely helpful.
That is not unfortunately not possible. For a Managed Miner you can use template to switch between different configurations in an efficent way, but the Managed Profit Miners are a bit too different for this concept to work. It would be extremely helpful.
December 12, 2017, 05:25:11 PM
Poured a bunch of HD errors. And nothing.
The trigger of HW errors has not work. It looks like after the update.
Can you please send the log file via mail? (toolbar: Tools -> Log File)The trigger of HW errors has not work. It looks like after the update.
The rule is configured to run on a single miner only. I assume this is the same miner as you had selected in the background? Is it correct to assume that the miner is running in Privileged API mode (also specified on Summary tab).
December 12, 2017, 05:09:02 PM
Patrike, is there any way to change miner type from Managed Miner to Managed Profit Miner and back? Some tips?
It would be extremely helpful.
It would be extremely helpful.
December 12, 2017, 04:49:45 PM
Poured a bunch of HD errors. And nothing.
The trigger of HW errors has not work. It looks like after the update.
The trigger of HW errors has not work. It looks like after the update.
December 12, 2017, 04:21:07 PM
anyone have a resource that can help me understand using an Antminer D3 for DASH?
December 12, 2017, 04:12:17 PM
Hello all!
Absolutely love using AM now, after a couple days, and being forced to learn about pools, setting up workers, it not only is easy, but forced me to educate myself a bit further.
I have one thing that I can not figure out for the life of me. If I allow use of SGMINER it constantly crashes. Giving output with OpenCL / ADL issues, not matching. I have seven RX4/5 cards which worked with NH, still work with SMOS, but cannot figure out what I need to change in order for it to work with AM.
I found the AMD profile in the software, adding a 1 to the platform made it function, but then mines with my igfx instead of one of the GPUs. I installed an OpenCL SDK per some instructions I found, but to no avail. I am running 17.11.1 drivers and 23.20.788.0 openCL.
Any help would be so appreciated. I have searched, and tried various .bat examples, but to zero avail.
Absolutely love using AM now, after a couple days, and being forced to learn about pools, setting up workers, it not only is easy, but forced me to educate myself a bit further.
I have one thing that I can not figure out for the life of me. If I allow use of SGMINER it constantly crashes. Giving output with OpenCL / ADL issues, not matching. I have seven RX4/5 cards which worked with NH, still work with SMOS, but cannot figure out what I need to change in order for it to work with AM.
I found the AMD profile in the software, adding a 1 to the platform made it function, but then mines with my igfx instead of one of the GPUs. I installed an OpenCL SDK per some instructions I found, but to no avail. I am running 17.11.1 drivers and 23.20.788.0 openCL.
Any help would be so appreciated. I have searched, and tried various .bat examples, but to zero avail.
December 12, 2017, 03:51:58 PM
Hi guys,
I am new to using Awesome Miner here and run into some really weird glitch (?) Hopefully someone can please help me out
I have several miners set up to mine ETH in Nanopool. I wanted to mine into 2 separate wallets (some of the rigs are for my friend's while some are mine.) I created 2 pools and assign miners to them accordingly - say pool1 and pool2.
When miner is "stopped", the pool name shows up correctly under miner tab. However, once I start the miner, for some reason, the display names all changed to a display pool1. Seems like this is only a display error on Awesome miner because when I check on Nanopool, it seems to be mining into correct wallet.
Am I doing something wrong? Has anyone had this before?
Thank you in advance, guys!
This is a display issue only.I am new to using Awesome Miner here and run into some really weird glitch (?) Hopefully someone can please help me out
I have several miners set up to mine ETH in Nanopool. I wanted to mine into 2 separate wallets (some of the rigs are for my friend's while some are mine.) I created 2 pools and assign miners to them accordingly - say pool1 and pool2.
When miner is "stopped", the pool name shows up correctly under miner tab. However, once I start the miner, for some reason, the display names all changed to a display pool1. Seems like this is only a display error on Awesome miner because when I check on Nanopool, it seems to be mining into correct wallet.
Am I doing something wrong? Has anyone had this before?
Thank you in advance, guys!
For mining software that report both pool URL and worker name, this is not a problem at all. Awesome Miner will look at this information and figure out which pool in Awesome Miner this matches and it will show coin information and the name of the pool as defined in Awesome Miner. It's about guessing, but works almost 100% of the cases.
Then we have some mining software that only report the pool URL to Awesome Miner, not the worker name. Awesome Miner will still try to figure out which pool in Awesome Miner this would represent. However, the guessing can fail because with only a pool URL, you may find two pools with the same URL. This is what happens on your scenario - the guessing goes wrong because Awesome Miner is not aware of the worker name.
There can for sure be ways of improving this (the most obvious would of course be to tell the mining software developers to pass worker name), but at least you have the explanation above.
December 12, 2017, 03:46:43 PM
I am not clear on adding a pool. There is nothing showing under options/pool but obviously I must be using one because I'm mining.
The predefined pools used by the profit miner (pools defined in Options dialog, Profit switching section) will not show up in the pools you have in Options dialog Pools section. So if you do profit switching, the pool list may very well be empty.You can still add you own pool here and make it part of the profit switching pools as a "Custom pool".
December 12, 2017, 03:45:28 PM
Hello,
This software is really great. Could it be possible to implement XMRIG (https://github.com/xmrig/xmrig) for CPU mining? This miner is fastest on many CPUs. It has his own API:
https://github.com/xmrig/xmrig/wiki/API
It’s only thing I miss
Thanks
I will consider it. Thanks for the suggestion. There are many XMR miners these days. I recently added support for Cast XMR and by using an External Miner, also XMR-Stak is supported. This software is really great. Could it be possible to implement XMRIG (https://github.com/xmrig/xmrig) for CPU mining? This miner is fastest on many CPUs. It has his own API:
https://github.com/xmrig/xmrig/wiki/API
It’s only thing I miss
Thanks
December 12, 2017, 03:43:39 PM
question about buying an AM license. if there's a group of us that are all running the same thing, with the same settings, can we share an Enterprise license with the multi-user login? or does that break the ToS? 
It's not possible to run multiple instances of Awesome Miner at the same time on a single computer. Even if you create multiple accounts, you cannot use the application at the same time. The web interface allows multiple users to login, but that one is limited in terms of functionality. December 12, 2017, 03:41:21 PM
Hello! Quick question - how do I assign different GPUs to different pools?
The "Enable/Disable" button is greyed out on the GPU tab for the pool, and using Rules does not switch off GPUs either (and would do it globally). I've looked through all settings and do not see an easy way to just mine altcoins on zpool with one GPU and eth on nanopool with the other GPU.
Hi,The "Enable/Disable" button is greyed out on the GPU tab for the pool, and using Rules does not switch off GPUs either (and would do it globally). I've looked through all settings and do not see an easy way to just mine altcoins on zpool with one GPU and eth on nanopool with the other GPU.
You need to create more than one miner, and for each miner you need to specify the command line for only using specific GPU's. For example if you run Claymore Miner you specify "-di 0,1" on the first miner and "-di 2,3" on the second. The difficult part is if you are going to do profit switching with many mining software. Awesome Miner doens't have any automatic way of setting this up for you, so it will be some work to figure out all command line parameters for all software to be used.
Enable/Disable concept for GPU's are only for mining software that has support for this feature. It's not supported by all.
December 12, 2017, 03:37:39 PM
Can we add an action that changes the webgui password and root password for the miners. I have my trigger set to detect the default bitmain pool and then change the pool to my preset pools but I would also like for it to then login root:root at the ip of the miner and change the password. The link is below for one of my miners replacing NEW with the variable for whatever the desired password would be. It would make batch deployment easier as it is I have to do it by hand for every miner.
http://10.0.0.63/cgi-bin/passwd.cgi?current_pw=root&new_pw=NEW&new_pw_ctrl=NEW
Is that possible to do if you use "Example: Open web interface for ASIC miner" as a starting point, but adjusts some parameter?http://10.0.0.63/cgi-bin/passwd.cgi?current_pw=root&new_pw=NEW&new_pw_ctrl=NEW
http://www.awesomeminer.com/help/rules.aspx
December 12, 2017, 03:32:28 PM
The Electroneum profit calculation is rather strange. This comes from WhatToMine right? AM has always been high on the profit for Electroneum but the percentage gap widens as the WhatToMine profit goes up. For example:
WhatToMine $66
AM $100
WhatToMine $79
AM $142
Any idea why this is?
I don't know exactly why, but WhatToMine calculates with at 35% pool fee (bad luck) on ETN:WhatToMine $66
AM $100
WhatToMine $79
AM $142
Any idea why this is?
https://whattomine.com/coins/213-etn-cryptonight
Jump to: