[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 506.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: s3c70r on November 29, 2017, 05:13:52 PM

Hi Patrike,

Could you please add Process information/command line arguments in the Summary of each rig ?

I will probably do that. I've actually been thinking of moving some of the information in the View Details dialog to make them more visible, including the Profit switching tab.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Kronny on November 29, 2017, 04:15:05 PM

Quote from: patrike on November 27, 2017, 01:13:20 PM

The Remote Agent application is not available on Linux so you will not have any additional features like clocking or make changes to the pools and so on. The plan is however to have the Remote Agent application running on Linux in the future.

Hi Patrike, do you have in your plan an OS Linux Based too? Would be wonderful, image on USB stick and start.
ciao
K

I do have plans to support Remote Agent on Linux, but the work has not been started yet. To begin with it will not be a "complete OS" where you simply boot from USB, as those solutions takes significant amount of time to develop.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: narousberg on November 29, 2017, 10:24:17 AM

Hi Patrike
i create a pool group. Add to this group two pools. Both pools work on same coin. Why AM switch between this two pools from time to time? Setting of priority and quota not help.
I want mine only on one prefered pool and second pool is only for reserve.
My config: D3 ASIC, Profit switching enabled, treshold 5%

Simply not understand how to stop this switching...

Maybe you can add a oportunity to disable switching for concrete miner in next releases?

Regards

Have you enabled Profit switching for this External Miner? It's disabled by default for all External Miners and must be manually enabled per miner if you want to use it. Please right click on the miner and select Properties, then you can disable the profit switcher.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: prominingUA on November 29, 2017, 04:51:21 AM

Hi
I can not configure the computer restart rule.
all configured according to the instructions. The client installed the remote computer.
In the rule properties, the manual activation was enabled. When you click nothing happens ....

Can you send me the log file for the Remote Agent application and indicate the time your perform the operation? The log can be accessed from the Remote Agent icon in the lower right corner of the screen, where the right-click menu has the option Log File.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: IzzyMoreno on November 28, 2017, 05:34:29 PM

Okay you have any idea how i can add starpool and granat for the estimates? Theyre everytime 0,00 but zpool and nicehash are showing that estimates. ( in the miners overview)

Take a look at this picture:
the estimates in € only working for zpool/nicehash, can i do anything? and for me its still not clear what the values in the profit switch table are meaning Cheesy

as example, NH und ZP are mostly 0.02 and starpool everytime 0.00

You have good advices for checktime and threeshold, too?

GranatGas should be supported since a few weeks ago. Star Pool is a multi-coin profit switching pool where Awesome Miner doesn't have support for getting their current profit.

You could set the threshold on a few percent, but otherwise I don't have any specific recommendations here.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: whoisthismanoO on November 29, 2017, 02:34:34 PM

Hi patrike,

I connected D3 but did not see chip temp, there are only PCB temp. How can I see chip temp? Its more important
Tnx.

Quote from: Allo-4ka on November 29, 2017, 04:07:05 PM

Quote from: whoisthismanoO on November 29, 2017, 02:34:34 PM

I connected D3 but did not see chip temp, there are only PCB temp.

On the previous page I asked almost the same thing - I have not received an answer yet

In the latest versions of Awesome Miner, you can change the display from PCB to Chip Temperature instead. Please go to Options dialog, General section and check "Display Antminer chip temperature in Status column".

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Allo-4ka on November 28, 2017, 04:15:04 PM

Hello patrike
Is it possible to see more results (customize progress field), that is, examples of reading the indicators? I would like to achieve this ...
I'm experiencing problems with the toolbar, I can not move or expand the speakers the way I need them

The columns are in auto-size mode which makes them a bit difficult to resize, but it should be possible to do some resizing of the columns (via the column headers) to get more space for the Progress column.

pfuenzalida

newbie

Activity: 22

Merit: 0

Quote from: patrike on November 28, 2017, 02:01:26 AM

Quote from: pfuenzalida on November 27, 2017, 07:28:56 PM

Quote from: jamesmbond on November 27, 2017, 04:58:40 PM

Is there a way to switch/change MANAGED TEMPLATES from within cloud service/dashboard? I have defined pools and unique coins/miner software by creating several managed templates in AwesomeMiner. I see where I can change POOLS from within cloud web page but nothing happens back at the miner -- i.e. I assume just changing pools is insufficient / not the same as changing to a managed template which is what I really need to do via the web/cloud service.

please advise if I'm doing something wrong or can we add this "change/apply managed template" feature to cloud service/page options?

I all, I'm totally new on it... I would like to learn about Awesome Miner, to monitor my little ASIC farm... can anyone recommend me some reading/tutorial/video to start..? if it is in Spanish, better.

tks

There are several topics on the web site, even if there are no single complete tutorial that covers everything:
http://www.awesomeminer.com/help.aspx

And to get started adding your ASIC's:
http://www.awesomeminer.com/help/externalwizard.aspx

Thanks a lot...!!!!

Thekingace

newbie

Activity: 22

Merit: 0

How do I make profit switching work with dual mining?

tailhead

newbie

Activity: 12

Merit: 0

Quote from: tailhead on November 27, 2017, 11:36:42 AM

Hi, I updated to ver. 4.2.1 but still facing same problem (I tried to set rule to find offline again, but didn't help).
For the moment I changed miner software from EWBF to DSTM and it looks fine.
Just want to report.

Hi Patrike,
I tried to tweak rules and now it looks fine (find offline status properly).
Thanks for your effort !!

By the way, I still have 1 request and 1 suggestion.
[Request]
In Profit Switching Profile Properties window, due to window is too small I could not see all contents.
https://dotup.org/uploda/dotup.org1400975.jpg
Can you make it little bigger, or put scroll bar?
[Suggestion]
When creating user defined coins, I want AM to look whattomine data by ticker (short name such as BTC, ETH, etc).
i.e. In case of Solaris (XLR), there are some data available in Whattomine but due to algo xevan not supported by AM, XLR is not listed in AM.
If I create user defined coin Solaris with ticker XLR, and AM seek coin XLR in whattomine for available data, it would be really helpful.
This can also nice for multi-algo coins like DGB if at least AM pick up proper price from whattomine.

s3c70r

member

Activity: 83

Merit: 10

Hi Patrike,

Could you please add Process information/command line arguments in the Summary of each rig ?

Kronny

member

Activity: 137

Merit: 10

Quote from: patrike on November 27, 2017, 01:13:20 PM

The Remote Agent application is not available on Linux so you will not have any additional features like clocking or make changes to the pools and so on. The plan is however to have the Remote Agent application running on Linux in the future.

Hi Patrike, do you have in your plan an OS Linux Based too? Would be wonderful, image on USB stick and start.
ciao
K

Allo-4ka

newbie

Activity: 71

Merit: 0

Quote from: whoisthismanoO on November 29, 2017, 02:34:34 PM

I connected D3 but did not see chip temp, there are only PCB temp.

On the previous page I asked almost the same thing - I have not received an answer yet

whoisthismanoO

full member

Activity: 173

Merit: 100

Hi patrike,

I connected D3 but did not see chip temp, there are only PCB temp. How can I see chip temp? Its more important
Tnx.

narousberg

legendary

Activity: 1754

Merit: 1007

Hi Patrike
i create a pool group. Add to this group two pools. Both pools work on same coin. Why AM switch between this two pools from time to time? Setting of priority and quota not help.
I want mine only on one prefered pool and second pool is only for reserve.
My config: D3 ASIC, Profit switching enabled, treshold 5%

Simply not understand how to stop this switching...

Maybe you can add a oportunity to disable switching for concrete miner in next releases?

Regards

prominingUA

newbie

Activity: 6

Merit: 0

Hi
I can not configure the computer restart rule.
all configured according to the instructions. The client installed the remote computer.
In the rule properties, the manual activation was enabled. When you click nothing happens ....

IzzyMoreno

newbie

Activity: 12

Merit: 0

Okay you have any idea how i can add starpool and granat for the estimates? Theyre everytime 0,00 but zpool and nicehash are showing that estimates. ( in the miners overview)

Take a look at this picture:
the estimates in € only working for zpool/nicehash, can i do anything? and for me its still not clear what the values in the profit switch table are meaning Cheesy

as example, NH und ZP are mostly 0.02 and starpool everytime 0.00

http://fs1.directupload.net/images/171129/fdbpubwn.png

You have good advices for checktime and threeshold, too?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: IzzyMoreno on November 28, 2017, 03:50:30 PM

Quote from: patrike on November 28, 2017, 02:03:14 PM

Quote from: IzzyMoreno on November 28, 2017, 05:10:33 AM

Hi, im using the pro version and i think i got the profit switching feature not right.

Currently i have 4 asic L3+ and trying a bit around with it including this profit addon.

On every miner ive enabled the profit switch default profile. In total, i have added one extra pool with granat.

In the profit details table see only values like 0.00, 0.02 sometimes 0.03 😅

Here a picture:

And, is it maybe possible to run on different pools and then to have a 24h statistic, which was best ?

Thank you

It's the difference between the pools that are of important to get the correct order. The numbers you see are from your static settings. You can change these in Options dialog, Algorithms section to get different numbers. However, it will not really impact the profit switcher as the order of the pools will still be the same because an ASIC only can handle one algorithm anyway.

Awesome Miner will never know the actual payouts from the pools for your specific miners - you need to check that yourself.

Okay, so for my understanding, this feature isnt useful for me, right? And optional pools auto adding like the auto. Api access isnt possible, right?

So i think i have not really benefits for my asics?

You will for sure be able to use the Profit switching feature and benefit from that one. My point was only that specifying correct hashrate for each algorithm is of no use when you have a miner that only can do Scrypt. The profit switcher can still do switching between the most profitable scrypt pools, so please continue using the feature like you do.

Allo-4ka

newbie

Activity: 71

Merit: 0

Hello patrike
Is it possible to see more results (customize progress field), that is, examples of reading the indicators? I would like to achieve this ...
I'm experiencing problems with the toolbar, I can not move or expand the speakers the way I need them

http://images2.imagebam.com/14/e1/57/914776671495423.png

IzzyMoreno

newbie

Activity: 12

Merit: 0

Quote from: patrike on November 28, 2017, 02:03:14 PM

Quote from: IzzyMoreno on November 28, 2017, 05:10:33 AM

Hi, im using the pro version and i think i got the profit switching feature not right.

Currently i have 4 asic L3+ and trying a bit around with it including this profit addon.

On every miner ive enabled the profit switch default profile. In total, i have added one extra pool with granat.

In the profit details table see only values like 0.00, 0.02 sometimes 0.03 😅

Here a picture:

And, is it maybe possible to run on different pools and then to have a 24h statistic, which was best ?

Thank you

It's the difference between the pools that are of important to get the correct order. The numbers you see are from your static settings. You can change these in Options dialog, Algorithms section to get different numbers. However, it will not really impact the profit switcher as the order of the pools will still be the same because an ASIC only can handle one algorithm anyway.

Awesome Miner will never know the actual payouts from the pools for your specific miners - you need to check that yourself.

Okay, so for my understanding, this feature isnt useful for me, right? And optional pools auto adding like the auto. Api access isnt possible, right?

So i think i have not really benefits for my asics?

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 506. (Read 703512 times)