@Narousberg:
A quick solution would be this:
Do another trigger in the same rule with the same settings, but with this property: Avg. hashrate 1 minute ago (or any other minute you prefer).
Below mark the "Match all" button.
Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 51. (Read 703113 times)
May 03, 2021, 02:14:13 AM
May 02, 2021, 12:55:57 PM
One another thing. I have situation when one of my GPU in the rig dont want start and i need process rig reboot. For this situation i created a rule where as trigger i use:
Check statistic (hashrate, shares)
Property: Avg. hashrate -> Current
Compare operation: Less or equal
Compare with percent of profit profile: 88
With this logic i catch hashrate drop of one or more GPU and then process reboot. Problem come when rigs switching to Nicehash. Sometimes during internal switching between orders on Nicehash, the hashrate drops till 0 and of course my rule will be activated. How can i ignore such situation in rule logic? Maybe this trigger must be improved and added possibility to add some delay timer, which will wait some time before rule action will be activated.
Regards.
Check statistic (hashrate, shares)
Property: Avg. hashrate -> Current
Compare operation: Less or equal
Compare with percent of profit profile: 88
With this logic i catch hashrate drop of one or more GPU and then process reboot. Problem come when rigs switching to Nicehash. Sometimes during internal switching between orders on Nicehash, the hashrate drops till 0 and of course my rule will be activated. How can i ignore such situation in rule logic? Maybe this trigger must be improved and added possibility to add some delay timer, which will wait some time before rule action will be activated.
Regards.
May 02, 2021, 12:33:40 PM
Hi Patrike, can you please add a additional information to notification for "accept no shares" rule, like a algorithm and pool. This will help for future settings diagnose if user cant check notification immedetly. Regards.
May 02, 2021, 12:55:13 AM
Ah ok sorry, i will take a look into binancepool and will report later to you. Yes Zil use the same OC as ETH, because it is the same algo
I will rework the config for binance pool for you.
Can't make it work with these settings so far, Phoenix shuts down immediately after start.
April 30, 2021, 07:02:55 AM
Ideally I'd like to stay on Binance for ETH and switch to any other pool for ZIL. Not sure though if such a setup can be configured in AM...
Yes sure it is no problem, you can mine ETH everywhere and you can mine ZIL everywhere. I make an description for you.
Here my config, only change the specifie data. This is the short way mining ZIL on rustpool and eth on ethermine.
and if you want to see rig names
This is for Teamredminer, if you use phönixminer, only need the first screenshot i think.
Thanks for instructions, sent some merit your way
Couple of questions:- on Binance pool you don't use wallet address but your account name. Am I right thinking I should use it instead of ETH address?
- ETH pool string after ZIL addy should look like @pool:port@8G ?
- A bit of offtopic, but what are typical Nvidia OC settings for ZIL, same as ETH?
Ah ok sorry, i will take a look into binancepool and will report later to you. Yes Zil use the same OC as ETH, because it is the same algo
I will rework the config for binance pool for you.
April 30, 2021, 06:32:53 AM
Awesome Miner version 8.4.6
Features
- Remote Agent includes both English and Russian language. The language can be changed via the Remote Agent context menu.
- New status filter to only show enabled miners
- New property filter for miner group name
- Added additional wallet balance units
Changes
- When selecting miner groups, only consider visible miners for the groups, not those hidden by filters
- Optimized CPU usage and bandwidth usage for built-in web server
Mining software
- TeamRedMiner 0.8.2
- XmRig 6.12.1
- Gminer 2.54
- RhMiner 2.3b
- Nanominer 3.3.5
Features
- Remote Agent includes both English and Russian language. The language can be changed via the Remote Agent context menu.
- New status filter to only show enabled miners
- New property filter for miner group name
- Added additional wallet balance units
Changes
- When selecting miner groups, only consider visible miners for the groups, not those hidden by filters
- Optimized CPU usage and bandwidth usage for built-in web server
Mining software
- TeamRedMiner 0.8.2
- XmRig 6.12.1
- Gminer 2.54
- RhMiner 2.3b
- Nanominer 3.3.5
April 30, 2021, 04:41:00 AM
Hi guys,
Can someone let me know if awesome miner bills avalon 921 by number of controllers or by each miner in a cluster ?
Awesome Miner only connects to the Controller for monitoring. For this reason, only one license per controller is required. Can someone let me know if awesome miner bills avalon 921 by number of controllers or by each miner in a cluster ?
April 29, 2021, 05:19:22 PM
Ideally I'd like to stay on Binance for ETH and switch to any other pool for ZIL. Not sure though if such a setup can be configured in AM...
Yes sure it is no problem, you can mine ETH everywhere and you can mine ZIL everywhere. I make an description for you.
Here my config, only change the specifie data. This is the short way mining ZIL on rustpool and eth on ethermine.
and if you want to see rig names
This is for Teamredminer, if you use phönixminer, only need the first screenshot i think.
Thanks for instructions, sent some merit your way
Couple of questions:- on Binance pool you don't use wallet address but your account name. Am I right thinking I should use it instead of ETH address?
- ETH pool string after ZIL addy should look like @pool:port@8G ?
- A bit of offtopic, but what are typical Nvidia OC settings for ZIL, same as ETH?
April 29, 2021, 06:42:24 AM
Hi guys,
Can someone let me know if awesome miner bills avalon 921 by number of controllers or by each miner in a cluster ?
Can someone let me know if awesome miner bills avalon 921 by number of controllers or by each miner in a cluster ?
April 28, 2021, 07:54:04 AM
If needed i can make a description for other guys for mining Zilliqa with Aweseomeminer.
Please do, I've been trying to figure out how to dual mine ETH+ZIL in AM for a while but no success so far. Any help will be appreciated.
PS Is it possible to dual mine them using ETH pool other that ezil?
Ok i make one tonight.
You can mine ETH+ZIL on any pool.
ERG+ZIL, VTC+ZIL, XHV+ZIL works on shardpool and ezil at the moment, but i have problems on rustpool, but i work on it.
With Zilswitcher you can mine every coin with Zil on Awesome Miner.
Ideally I'd like to stay on Binance for ETH and switch to any other pool for ZIL. Not sure though if such a setup can be configured in AM...
Yes sure it is no problem, you can mine ETH everywhere and you can mine ZIL everywhere. I make an description for you.
Here my config, only change the specifie data. This is the short way mining ZIL on rustpool and eth on ethermine.
and if you want to see rig names
This is for Teamredminer, if you use phönixminer, only need the first screenshot i think.
April 28, 2021, 07:28:13 AM
If needed i can make a description for other guys for mining Zilliqa with Aweseomeminer.
Please do, I've been trying to figure out how to dual mine ETH+ZIL in AM for a while but no success so far. Any help will be appreciated.
PS Is it possible to dual mine them using ETH pool other that ezil?
Ok i make one tonight.
You can mine ETH+ZIL on any pool.
ERG+ZIL, VTC+ZIL, XHV+ZIL works on shardpool and ezil at the moment, but i have problems on rustpool, but i work on it.
With Zilswitcher you can mine every coin with Zil on Awesome Miner.
Ideally I'd like to stay on Binance for ETH and switch to any other pool for ZIL. Not sure though if such a setup can be configured in AM...
April 28, 2021, 05:01:12 AM
If needed i can make a description for other guys for mining Zilliqa with Aweseomeminer.
Please do, I've been trying to figure out how to dual mine ETH+ZIL in AM for a while but no success so far. Any help will be appreciated.
PS Is it possible to dual mine them using ETH pool other that ezil?
Ok i make one tonight.
You can mine ETH+ZIL on any pool.
ERG+ZIL, VTC+ZIL, XHV+ZIL works on shardpool and ezil at the moment, but i have problems on rustpool, but i work on it.
With Zilswitcher you can mine every coin with Zil on Awesome Miner.
April 28, 2021, 01:48:09 AM
If needed i can make a description for other guys for mining Zilliqa with Aweseomeminer.
Please do, I've been trying to figure out how to dual mine ETH+ZIL in AM for a while but no success so far. Any help will be appreciated.
PS Is it possible to dual mine them using ETH pool other that ezil?
April 22, 2021, 01:08:21 AM
Hi Patrik,
is the Awesome-Miner Firmware also working for the S9K-Version?
BR Ralf
Hi Ralf,is the Awesome-Miner Firmware also working for the S9K-Version?
BR Ralf
The S9 firmware only works on Antminer S9, S9i and S9j. It's unfortunately not supporting S9K / S9SE.
April 21, 2021, 03:57:36 AM
Hi Patrik,
is the Awesome-Miner Firmware also working for the S9K-Version?
BR Ralf
is the Awesome-Miner Firmware also working for the S9K-Version?
BR Ralf
April 20, 2021, 09:56:54 AM
@patrike
I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?
Do you have access to the HS1 Plus miner right now? Could you please send me the API report for it via PM or mail. You can access the API Report via the toolbar Tools -> API Report.I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?
Goldshell HS3 and HS5 was so similar from a monitoring point of view that I couldn't even tell them apart. It's likely that HS1 also are similar.
I have access to the miner but AM does not see it. I have tried locate it with AM on the network (I know the ip address) but I cannot get AM to see it.
Are there any settings in the web interface for this miner that would indicate that you could enable the API or monitoring?
it runs in a CLI window - I dont see or know of any options screens. I really know very little about it other than that it runs perfectly and has already ROI'd
April 20, 2021, 09:53:05 AM
@patrike
I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?
Do you have access to the HS1 Plus miner right now? Could you please send me the API report for it via PM or mail. You can access the API Report via the toolbar Tools -> API Report.I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?
Goldshell HS3 and HS5 was so similar from a monitoring point of view that I couldn't even tell them apart. It's likely that HS1 also are similar.
I have access to the miner but AM does not see it. I have tried locate it with AM on the network (I know the ip address) but I cannot get AM to see it.
Are there any settings in the web interface for this miner that would indicate that you could enable the API or monitoring?
April 20, 2021, 09:34:37 AM
@patrike
I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?
Do you have access to the HS1 Plus miner right now? Could you please send me the API report for it via PM or mail. You can access the API Report via the toolbar Tools -> API Report.I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?
Goldshell HS3 and HS5 was so similar from a monitoring point of view that I couldn't even tell them apart. It's likely that HS1 also are similar.
I have access to the miner but AM does not see it. I have tried locate it with AM on the network (I know the ip address) but I cannot get AM to see it.
April 20, 2021, 09:20:40 AM
@patrike
I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?
Do you have access to the HS1 Plus miner right now? Could you please send me the API report for it via PM or mail. You can access the API Report via the toolbar Tools -> API Report.I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?
Goldshell HS3 and HS5 was so similar from a monitoring point of view that I couldn't even tell them apart. It's likely that HS1 also are similar.
April 20, 2021, 09:17:12 AM
Hello Patrike,
There's a little issue with statistics regarding Flux coin (ex Zel). Coin's price displayed at the bottom bar is not right...
Could you please also update icon too ?
When comparing to WhatToMine, it looks fine right now. Can you please verify again?There's a little issue with statistics regarding Flux coin (ex Zel). Coin's price displayed at the bottom bar is not right...
Could you please also update icon too ?
I will include the coin icon in the next release.
Jump to: