[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 52.

sxemini

member

Activity: 1558

Merit: 69

Quote from: Commie on April 28, 2021, 01:48:09 AM

Quote from: sxemini on March 04, 2019, 03:07:38 AM

If needed i can make a description for other guys for mining Zilliqa with Aweseomeminer.

Please do, I've been trying to figure out how to dual mine ETH+ZIL in AM for a while but no success so far. Any help will be appreciated.

PS Is it possible to dual mine them using ETH pool other that ezil?

Ok i make one tonight.

You can mine ETH+ZIL on any pool.
ERG+ZIL, VTC+ZIL, XHV+ZIL works on shardpool and ezil at the moment, but i have problems on rustpool, but i work on it.

With Zilswitcher you can mine every coin with Zil on Awesome Miner.

Commie

full member

Activity: 621

Merit: 108

Quote from: sxemini on March 04, 2019, 03:07:38 AM

If needed i can make a description for other guys for mining Zilliqa with Aweseomeminer.

Please do, I've been trying to figure out how to dual mine ETH+ZIL in AM for a while but no success so far. Any help will be appreciated.

PS Is it possible to dual mine them using ETH pool other that ezil?

patrike

legendary

Activity: 3556

Merit: 1095

Quote from: ralf007at on April 21, 2021, 03:57:36 AM

Hi Patrik,

is the Awesome-Miner Firmware also working for the S9K-Version?

BR Ralf

Hi Ralf,

The S9 firmware only works on Antminer S9, S9i and S9j. It's unfortunately not supporting S9K / S9SE.

ralf007at

newbie

Activity: 52

Merit: 0

Hi Patrik,

is the Awesome-Miner Firmware also working for the S9K-Version?

BR Ralf

MoparMiningLLC

legendary

Activity: 2324

Merit: 2533

EIN: 82-3893490

Quote from: patrike on April 20, 2021, 09:53:05 AM

Quote from: MoparMiningLLC on April 20, 2021, 09:34:37 AM

Quote from: patrike on April 20, 2021, 09:20:40 AM

Quote from: MoparMiningLLC on April 20, 2021, 06:13:18 AM

@patrike

I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?

Do you have access to the HS1 Plus miner right now? Could you please send me the API report for it via PM or mail. You can access the API Report via the toolbar Tools -> API Report.

Goldshell HS3 and HS5 was so similar from a monitoring point of view that I couldn't even tell them apart. It's likely that HS1 also are similar.

I have access to the miner but AM does not see it. I have tried locate it with AM on the network (I know the ip address) but I cannot get AM to see it.

I was hoping the HS1 miner would be similar to the more recent Goldshell miners, but unfortunately it sounds like it doesn't have any active monitoring interface.
Are there any settings in the web interface for this miner that would indicate that you could enable the API or monitoring?

it runs in a CLI window - I dont see or know of any options screens. I really know very little about it other than that it runs perfectly and has already ROI'd

patrike

legendary

Activity: 3556

Merit: 1095

Quote from: MoparMiningLLC on April 20, 2021, 09:34:37 AM

Quote from: patrike on April 20, 2021, 09:20:40 AM

Quote from: MoparMiningLLC on April 20, 2021, 06:13:18 AM

@patrike

I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?

Do you have access to the HS1 Plus miner right now? Could you please send me the API report for it via PM or mail. You can access the API Report via the toolbar Tools -> API Report.

Goldshell HS3 and HS5 was so similar from a monitoring point of view that I couldn't even tell them apart. It's likely that HS1 also are similar.

I have access to the miner but AM does not see it. I have tried locate it with AM on the network (I know the ip address) but I cannot get AM to see it.

I was hoping the HS1 miner would be similar to the more recent Goldshell miners, but unfortunately it sounds like it doesn't have any active monitoring interface.
Are there any settings in the web interface for this miner that would indicate that you could enable the API or monitoring?

MoparMiningLLC

legendary

Activity: 2324

Merit: 2533

EIN: 82-3893490

Quote from: patrike on April 20, 2021, 09:20:40 AM

Quote from: MoparMiningLLC on April 20, 2021, 06:13:18 AM

@patrike

I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?

Do you have access to the HS1 Plus miner right now? Could you please send me the API report for it via PM or mail. You can access the API Report via the toolbar Tools -> API Report.

Goldshell HS3 and HS5 was so similar from a monitoring point of view that I couldn't even tell them apart. It's likely that HS1 also are similar.

I have access to the miner but AM does not see it. I have tried locate it with AM on the network (I know the ip address) but I cannot get AM to see it.

patrike

legendary

Activity: 3556

Merit: 1095

Quote from: MoparMiningLLC on April 20, 2021, 06:13:18 AM

@patrike

I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?

Do you have access to the HS1 Plus miner right now? Could you please send me the API report for it via PM or mail. You can access the API Report via the toolbar Tools -> API Report.

Goldshell HS3 and HS5 was so similar from a monitoring point of view that I couldn't even tell them apart. It's likely that HS1 also are similar.

patrike

legendary

Activity: 3556

Merit: 1095

Quote from: Dalba on April 19, 2021, 03:24:04 PM

Hello Patrike,
There's a little issue with statistics regarding Flux coin (ex Zel). Coin's price displayed at the bottom bar is not right...
Could you please also update icon too ?

When comparing to WhatToMine, it looks fine right now. Can you please verify again?

I will include the coin icon in the next release.

patrike

legendary

Activity: 3556

Merit: 1095

Awesome Miner version 8.4.5

Features
- Telegram notifications can be sent to specific Telegram groups, making it easier to make the messages available to more users
User interface
- Miner group name will be displayed in the list of notifications
- Keyboard shortcuts for navigating between the tabs in the Awesome Miner main window. Ctrl+Tab for changing to the next tab and Ctrl+Shift+Tab for changing to the previous tab.
Changes
- Increase the maximum number of rows for heat maps
- Permanently removed Blazepool
Mining software
- T-Rex miner 0.20.1
- SrbMiner-Multi 0.7.3
- Gminer 2.53
Corrections
- Correction to processing of the Mining Pool Hub API response, to handle any incomplete data better

MoparMiningLLC

legendary

Activity: 2324

Merit: 2533

EIN: 82-3893490

@patrike

I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?

Dalba

newbie

Activity: 92

Merit: 0

Hello Patrike,
There's a little issue with statistics regarding Flux coin (ex Zel). Coin's price displayed at the bottom bar is not right...
Could you please also update icon too ?

patrike

legendary

Activity: 3556

Merit: 1095

Awesome Miner version 8.4.4

Features
- CSV file export from Mining History
Changes
- Save heat map configuration for where to expand the map (top/left or bottom/right)
- Reduce bandwidth usage for local web server
Mining software
- Lolminer 1.26

patrike

legendary

Activity: 3556

Merit: 1095

Quote from: ralf007at on April 14, 2021, 09:17:29 AM

Quote from: patrike on April 14, 2021, 08:48:32 AM

Quote from: ralf007at on April 14, 2021, 07:47:04 AM

Quote from: patrike on April 14, 2021, 01:24:05 AM

Quote from: ralf007at on April 14, 2021, 01:00:32 AM

Hi Patrik,

is there an option how one can configure API access for WhatsMiner?

BR Ralf

Hi Ralf and thanks for your question.

The only way to enable the API for Whatsminer is to use their WhatsminerTool. I've been in contact with Whatsminer about letting Awesome Miner doing on its own, but that isn't possible. Please see the instructions here:
https://support.awesomeminer.com/support/solutions/articles/35000162330-whatsminer-api-access

In the near future, we will also provide an optimized custom Whatsminer firmware, similar to what we provide for Antminers today.

Hi Patrik,

thank you - i did everything as suggested in the link - but if i want to configure the API access in WhatsMiner, i always get the status: Connection failure

BR Ralf

Hi Ralf,

Thanks for the update. Please note this WhatsminerTool is far from user friendly and predictable in terms of behavior.
- Do you see general monitoring information of your Whatsminer using the WhatsminerTool?
- Are you running a recent firmware version on your Whatsminers?

Hi Patrik,

yes i did the firmware upgrade: 200210325.22.REL and since then, AwsomeMiner reports high temperatures for the ASIC-Chips - but in the WhatsminerTool everything looks good ...

BR Ralf

Hi Ralf,
Can you send me the following via mail?
- API Report for this Whatsminer (Awesome Miner toolbar: Tools -> API Report)
- A screenshot of the WhatminerTool issue with configuring API access. I have a support contact at Whatsminer I can reach out to for this issue.
Thanks!

ralf007at

newbie

Activity: 52

Merit: 0

Quote from: patrike on April 14, 2021, 08:48:32 AM

Quote from: ralf007at on April 14, 2021, 07:47:04 AM

Quote from: patrike on April 14, 2021, 01:24:05 AM

Quote from: ralf007at on April 14, 2021, 01:00:32 AM

Hi Patrik,

is there an option how one can configure API access for WhatsMiner?

BR Ralf

Hi Ralf and thanks for your question.

The only way to enable the API for Whatsminer is to use their WhatsminerTool. I've been in contact with Whatsminer about letting Awesome Miner doing on its own, but that isn't possible. Please see the instructions here:
https://support.awesomeminer.com/support/solutions/articles/35000162330-whatsminer-api-access

In the near future, we will also provide an optimized custom Whatsminer firmware, similar to what we provide for Antminers today.

Hi Patrik,

thank you - i did everything as suggested in the link - but if i want to configure the API access in WhatsMiner, i always get the status: Connection failure

BR Ralf

Hi Ralf,

Thanks for the update. Please note this WhatsminerTool is far from user friendly and predictable in terms of behavior.
- Do you see general monitoring information of your Whatsminer using the WhatsminerTool?
- Are you running a recent firmware version on your Whatsminers?

Hi Patrik,

yes i did the firmware upgrade: 200210325.22.REL and since then, AwsomeMiner reports high temperatures for the ASIC-Chips - but in the WhatsminerTool everything looks good ...

BR Ralf

patrike

legendary

Activity: 3556

Merit: 1095

Quote from: ralf007at on April 14, 2021, 07:47:04 AM

Quote from: patrike on April 14, 2021, 01:24:05 AM

Quote from: ralf007at on April 14, 2021, 01:00:32 AM

Hi Patrik,

is there an option how one can configure API access for WhatsMiner?

BR Ralf

Hi Ralf and thanks for your question.

The only way to enable the API for Whatsminer is to use their WhatsminerTool. I've been in contact with Whatsminer about letting Awesome Miner doing on its own, but that isn't possible. Please see the instructions here:
https://support.awesomeminer.com/support/solutions/articles/35000162330-whatsminer-api-access

In the near future, we will also provide an optimized custom Whatsminer firmware, similar to what we provide for Antminers today.

Hi Patrik,

thank you - i did everything as suggested in the link - but if i want to configure the API access in WhatsMiner, i always get the status: Connection failure

BR Ralf

Hi Ralf,

Thanks for the update. Please note this WhatsminerTool is far from user friendly and predictable in terms of behavior.
- Do you see general monitoring information of your Whatsminer using the WhatsminerTool?
- Are you running a recent firmware version on your Whatsminers?

ralf007at

newbie

Activity: 52

Merit: 0

Quote from: patrike on April 14, 2021, 01:24:05 AM

Quote from: ralf007at on April 14, 2021, 01:00:32 AM

Hi Patrik,

is there an option how one can configure API access for WhatsMiner?

BR Ralf

Hi Ralf and thanks for your question.

The only way to enable the API for Whatsminer is to use their WhatsminerTool. I've been in contact with Whatsminer about letting Awesome Miner doing on its own, but that isn't possible. Please see the instructions here:
https://support.awesomeminer.com/support/solutions/articles/35000162330-whatsminer-api-access

In the near future, we will also provide an optimized custom Whatsminer firmware, similar to what we provide for Antminers today.

Hi Patrik,

thank you - i did everything as suggested in the link - but if i want to configure the API access in WhatsMiner, i always get the status: Connection failure

BR Ralf

patrike

legendary

Activity: 3556

Merit: 1095

Quote from: ralf007at on April 14, 2021, 01:00:32 AM

Hi Patrik,

is there an option how one can configure API access for WhatsMiner?

BR Ralf

Hi Ralf and thanks for your question.

The only way to enable the API for Whatsminer is to use their WhatsminerTool. I've been in contact with Whatsminer about letting Awesome Miner doing on its own, but that isn't possible. Please see the instructions here:
https://support.awesomeminer.com/support/solutions/articles/35000162330-whatsminer-api-access

In the near future, we will also provide an optimized custom Whatsminer firmware, similar to what we provide for Antminers today.

ralf007at

newbie

Activity: 52

Merit: 0

Hi Patrik,

is there an option how one can configure API access for WhatsMiner?

BR Ralf

patrike

legendary

Activity: 3556

Merit: 1095

Awesome Miner version 8.4.3

ASIC mining
- Added support for Goldshell ASIC miners
- Improve detection of Innosilicon ASICs
- Improve detection of Whatsminer ASICs
Features
- Mining history will keep track of the miner power usage over time
- Heat maps can be configured for automatic sorting of miners by IP address
- The trigger for dead device detection has been improved to detect failed Antminer hash boards
Mining software
- Gminer 2.51
- XmRig 6.11.2
- T-Rex miner 0.20.0
- SrbMiner-Multi 0.7.2
Corrections
- Correction to a scenario where the web proxy feature could cause a crash of Remote Proxy
- Correction to Nanopool ERG coin balance

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 52. (Read 703583 times)