Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 53. (Read 703113 times)
April 10, 2021, 12:14:55 AM
I am very retarded and new to mining. I set up MiningPoolHub mining with AwesomeMiner and left Profit Switcher on. It swapped automatically to mining on Zergpool today, however it's mining and paying out to what appears to be a random wallet. What do I do to make it mine and pay out to my own wallet?
April 09, 2021, 02:37:56 PM
Hello!! Currently using Awesome Miner with MPH. I would like to change to Binance pool, first because fee is only 0.5% instead of 0.9%, but also because it's more convenient for me.
Is it possible, and if so, how?
Thanks a lot!!
You can create a new pool in the Options dialog, Pools section.Is it possible, and if so, how?
Thanks a lot!!
1) Enter the following Pool Connection URL if you want to mine Ethereum: ethash.poolbinance.com:8888
2) Worker name should be your Binance account name
3) Select Ethereum as coin
4) Save the pool
5) Open the properties of your Managed Miner and select the Binance Ethereum pool you just added.
Done it!!!
Do you know why, on equal hashrate, Binance pool gives me an estimate about 10% lower than MPH pool? I've done in two computers, one with a 1070 and the other one my 5x mining rig and in both cases result I see on Awesome miner is lower on Binance pool (actually is more like 15% worse)
April 09, 2021, 12:12:23 PM
Hi Patrike, after Bminer update to 16.4.6 version, now is unable to start mining of Cuckatoo31 algo. Looks like the syntaxis of delegated mining params is wrong. Regards.
April 09, 2021, 11:29:16 AM
Awesome Miner version 8.4.2
ASIC mining
- Whatsminer hashrate display will use the 1 minute average value by default, as it's a more realistic representation of the current hashrate
- Whatsminer M32s supported
- Avalon 1246 support improved
- Innosilicon Scrypt miner support improved
GPU mining
- Easier to find the GPU to overclock by allowing double click on a GPU in the GPU tab to switch to the GPU clocking tab
Features
- New hashrate trend trigger for comparing the average hashrate of the last hours to the average hashrate over the last 6 days
Mining software
- Gminer 2.50
- Nanominer 3.3.4
- XmRig 6.11.1
- Lolminer 1.25
- Miniz Miner 1.7x3
- CpuMiner-Opt 3.16.2
Corrections
- Correction to GPU selection for Phoenix Miner when selecting a single GPU with index 10 or above.
ASIC mining
- Whatsminer hashrate display will use the 1 minute average value by default, as it's a more realistic representation of the current hashrate
- Whatsminer M32s supported
- Avalon 1246 support improved
- Innosilicon Scrypt miner support improved
GPU mining
- Easier to find the GPU to overclock by allowing double click on a GPU in the GPU tab to switch to the GPU clocking tab
Features
- New hashrate trend trigger for comparing the average hashrate of the last hours to the average hashrate over the last 6 days
Mining software
- Gminer 2.50
- Nanominer 3.3.4
- XmRig 6.11.1
- Lolminer 1.25
- Miniz Miner 1.7x3
- CpuMiner-Opt 3.16.2
Corrections
- Correction to GPU selection for Phoenix Miner when selecting a single GPU with index 10 or above.
April 09, 2021, 11:28:33 AM
Patrike, thanks a lot for your support and help with my issue, all is up and running (finally!). Sent a bit of merit your way 
Thanks! April 09, 2021, 10:58:29 AM
Patrike, thanks a lot for your support and help with my issue, all is up and running (finally!). Sent a bit of merit your way
April 09, 2021, 07:46:05 AM
Good afternoon, Patrike. How to run nanominer ERGO + ZIL dual mining? Thank.
Hello. This is not yet supported via Awesome Miner.It works with awesomeminer, setup a managed miner with ergo pool, then go to managed miner properties, choose nanominer, your ergo pool, go to configuration file, and ONLY add your zil config to autolykos config. Thats it. The only problem is, AM shows twice the number of GPUs. But i hope Patrike will improve this.
Patrike can you update miniZ miner?
And have you looked in coins export?
The request for a Coin export feature is noted, but right now there are also a large number of other requests that also needs attention. Everything is however noted so no requests as lost.
April 09, 2021, 07:43:48 AM
Hello!! Currently using Awesome Miner with MPH. I would like to change to Binance pool, first because fee is only 0.5% instead of 0.9%, but also because it's more convenient for me.
Is it possible, and if so, how?
Thanks a lot!!
You can create a new pool in the Options dialog, Pools section.Is it possible, and if so, how?
Thanks a lot!!
1) Enter the following Pool Connection URL if you want to mine Ethereum: ethash.poolbinance.com:8888
2) Worker name should be your Binance account name
3) Select Ethereum as coin
4) Save the pool
5) Open the properties of your Managed Miner and select the Binance Ethereum pool you just added.
April 09, 2021, 05:55:41 AM
Weird thing is happening and I can't beat it for almost 2 days now. One of my rigs was running Linux and had hardware issues, so I disassembled it changed motherboard, few cards etc. Altered all OC settings, GPU number etc in the settings, started the rig... It loses cards in less than 1 minute, they just stop hashing and go offline. After deleting miner from the system, setting OC again nothing changed. Okay, thought I, let's try a different approach. I took another SSD, installed fresh copy of Windows on it, installed Remote agent for Windows, searched for a new miner, found and configured it... Now it shows the rig is offline, though when I run Managed host - Test connection and uncheck Remote Agent for Linux tickbox (it's checked by default) - connection test goes OK. All this time the rig has the same IP. What am I doing wrong and how can I solve this?
Please try to restart the Awesome Miner main application once. If you change a computer from Linux to Windows, the connection may not be correctly initiated after a change to the "Remote Agent for Linux" checkbox.I did that few times both with main app and remote agent. Nothing helped.
You can send via the following link:
https://www.awesomeminer.com/contact
Thanks Patrike, will do that. I don't see log file in program directory, where should I look in Win64, %appdata% ? I couldn't overcome this issue and had to stop using AM at all for more than a week now, which super annoys me.
Logs sent.
April 08, 2021, 08:39:10 AM
Hello!! Currently using Awesome Miner with MPH. I would like to change to Binance pool, first because fee is only 0.5% instead of 0.9%, but also because it's more convenient for me.
Is it possible, and if so, how?
Thanks a lot!!
Is it possible, and if so, how?
Thanks a lot!!
April 08, 2021, 04:54:25 AM
Good afternoon, Patrike. How to run nanominer ERGO + ZIL dual mining? Thank.
Hello. This is not yet supported via Awesome Miner.It works with awesomeminer, setup a managed miner with ergo pool, then go to managed miner properties, choose nanominer, your ergo pool, go to configuration file, and ONLY add your zil config to autolykos config. Thats it. The only problem is, AM shows twice the number of GPUs. But i hope Patrike will improve this.
Patrike can you update miniZ miner?
And have you looked in coins export?
April 08, 2021, 03:59:42 AM
Hi Patrike, some suggestion:
Can you please add a rule trigger, where user can compare a difficulty value for selected algorithm and actions for add / remove selected pool / pool group to profit switching additional pools section. This will help to create a smart dynamic profit switching scenario, where actual algoritm difficulty is important, when no sence to switch to less liquidity coin, but at the moment this small coin/algo is quite more profitable as coin with big liquidity and trigger switching. Simple AM need a functionality to manage a "profit switch" additional pools list.
Regards.
There is a trigger for detecting a specific difficulty value. What is missing here would be an action to make impact on the profit switching decision for a specific pool or coin.Can you please add a rule trigger, where user can compare a difficulty value for selected algorithm and actions for add / remove selected pool / pool group to profit switching additional pools section. This will help to create a smart dynamic profit switching scenario, where actual algoritm difficulty is important, when no sence to switch to less liquidity coin, but at the moment this small coin/algo is quite more profitable as coin with big liquidity and trigger switching. Simple AM need a functionality to manage a "profit switch" additional pools list.
Regards.
Instead of adding/removing pools from the profit switcher, it might would make more sense to set the profit factor of these pools or coins. This would impact the profit switching decision.
Another thing: MiniZ miner have a new version. Please push update.
April 08, 2021, 03:30:30 AM
Weird thing is happening and I can't beat it for almost 2 days now. One of my rigs was running Linux and had hardware issues, so I disassembled it changed motherboard, few cards etc. Altered all OC settings, GPU number etc in the settings, started the rig... It loses cards in less than 1 minute, they just stop hashing and go offline. After deleting miner from the system, setting OC again nothing changed. Okay, thought I, let's try a different approach. I took another SSD, installed fresh copy of Windows on it, installed Remote agent for Windows, searched for a new miner, found and configured it... Now it shows the rig is offline, though when I run Managed host - Test connection and uncheck Remote Agent for Linux tickbox (it's checked by default) - connection test goes OK. All this time the rig has the same IP. What am I doing wrong and how can I solve this?
Please try to restart the Awesome Miner main application once. If you change a computer from Linux to Windows, the connection may not be correctly initiated after a change to the "Remote Agent for Linux" checkbox.I did that few times both with main app and remote agent. Nothing helped.
You can send via the following link:
https://www.awesomeminer.com/contact
Thanks Patrike, will do that. I don't see log file in program directory, where should I look in Win64, %appdata% ? I couldn't overcome this issue and had to stop using AM at all for more than a week now, which super annoys me.
April 08, 2021, 03:27:42 AM
Hi Patrike, some suggestion:
Can you please add a rule trigger, where user can compare a difficulty value for selected algorithm and actions for add / remove selected pool / pool group to profit switching additional pools section. This will help to create a smart dynamic profit switching scenario, where actual algoritm difficulty is important, when no sence to switch to less liquidity coin, but at the moment this small coin/algo is quite more profitable as coin with big liquidity and trigger switching. Simple AM need a functionality to manage a "profit switch" additional pools list.
Regards.
There is a trigger for detecting a specific difficulty value. What is missing here would be an action to make impact on the profit switching decision for a specific pool or coin.Can you please add a rule trigger, where user can compare a difficulty value for selected algorithm and actions for add / remove selected pool / pool group to profit switching additional pools section. This will help to create a smart dynamic profit switching scenario, where actual algoritm difficulty is important, when no sence to switch to less liquidity coin, but at the moment this small coin/algo is quite more profitable as coin with big liquidity and trigger switching. Simple AM need a functionality to manage a "profit switch" additional pools list.
Regards.
Instead of adding/removing pools from the profit switcher, it might would make more sense to set the profit factor of these pools or coins. This would impact the profit switching decision.
April 08, 2021, 03:17:44 AM
Hello,
I found a problem trying to get on information tab the system uptime:
Please, it will be nice to see the uptime system on information Tab
Thanks for your question. For ASIC miners, Awesome Miner can only show the Mining Uptime. This is the time the mining process has been running, but it isn't the same as the operating system uptime. If Cgminer process on the ASIC miner is restarted, the Mining Uptime will reset although the system didn't reboot.I found a problem trying to get on information tab the system uptime:
Please, it will be nice to see the uptime system on information Tab
The Information Column has support for two kinds of uptime, the Mining Uptime and the System Uptime (OS uptime). For your ASIC miner, only Mining Uptime is supported. For Managed Miners, we can show both the Mining Uptime and also the System Uptime.
Nice!
And if the miner is not managed miner the information tab does not show any information about the uptime?
April 07, 2021, 03:10:42 PM
You must set your windows10 network to private.
I always thought that's the first thing to do when you set up your network after fresh install
It IS set to private and firewall rules are set accordingly. April 07, 2021, 05:46:46 AM
Weird thing is happening and I can't beat it for almost 2 days now. One of my rigs was running Linux and had hardware issues, so I disassembled it changed motherboard, few cards etc. Altered all OC settings, GPU number etc in the settings, started the rig... It loses cards in less than 1 minute, they just stop hashing and go offline. After deleting miner from the system, setting OC again nothing changed. Okay, thought I, let's try a different approach. I took another SSD, installed fresh copy of Windows on it, installed Remote agent for Windows, searched for a new miner, found and configured it... Now it shows the rig is offline, though when I run Managed host - Test connection and uncheck Remote Agent for Linux tickbox (it's checked by default) - connection test goes OK. All this time the rig has the same IP. What am I doing wrong and how can I solve this?
Please try to restart the Awesome Miner main application once. If you change a computer from Linux to Windows, the connection may not be correctly initiated after a change to the "Remote Agent for Linux" checkbox.I did that few times both with main app and remote agent. Nothing helped.
You can send via the following link:
https://www.awesomeminer.com/contact
Thanks Patrike, will do that. I don't see log file in program directory, where should I look in Win64, %appdata% ? I couldn't overcome this issue and had to stop using AM at all for more than a week now, which super annoys me.
You must set your windows10 network to private.
April 06, 2021, 04:22:10 PM
Hi Patrike, some suggestion:
Can you please add a rule trigger, where user can compare a difficulty value for selected algorithm and actions for add / remove selected pool / pool group to profit switching additional pools section. This will help to create a smart dynamic profit switching scenario, where actual algoritm difficulty is important, when no sence to switch to less liquidity coin, but at the moment this small coin/algo is quite more profitable as coin with big liquidity and trigger switching. Simple AM need a functionality to manage a "profit switch" additional pools list.
Regards.
Can you please add a rule trigger, where user can compare a difficulty value for selected algorithm and actions for add / remove selected pool / pool group to profit switching additional pools section. This will help to create a smart dynamic profit switching scenario, where actual algoritm difficulty is important, when no sence to switch to less liquidity coin, but at the moment this small coin/algo is quite more profitable as coin with big liquidity and trigger switching. Simple AM need a functionality to manage a "profit switch" additional pools list.
Regards.
April 06, 2021, 09:59:39 AM
Weird thing is happening and I can't beat it for almost 2 days now. One of my rigs was running Linux and had hardware issues, so I disassembled it changed motherboard, few cards etc. Altered all OC settings, GPU number etc in the settings, started the rig... It loses cards in less than 1 minute, they just stop hashing and go offline. After deleting miner from the system, setting OC again nothing changed. Okay, thought I, let's try a different approach. I took another SSD, installed fresh copy of Windows on it, installed Remote agent for Windows, searched for a new miner, found and configured it... Now it shows the rig is offline, though when I run Managed host - Test connection and uncheck Remote Agent for Linux tickbox (it's checked by default) - connection test goes OK. All this time the rig has the same IP. What am I doing wrong and how can I solve this?
Please try to restart the Awesome Miner main application once. If you change a computer from Linux to Windows, the connection may not be correctly initiated after a change to the "Remote Agent for Linux" checkbox.I did that few times both with main app and remote agent. Nothing helped.
You can send via the following link:
https://www.awesomeminer.com/contact
Thanks Patrike, will do that. I don't see log file in program directory, where should I look in Win64, %appdata% ? I couldn't overcome this issue and had to stop using AM at all for more than a week now, which super annoys me.
April 06, 2021, 08:20:24 AM
Hello,
I found a problem trying to get on information tab the system uptime:
Please, it will be nice to see the uptime system on information Tab
Thanks for your question. For ASIC miners, Awesome Miner can only show the Mining Uptime. This is the time the mining process has been running, but it isn't the same as the operating system uptime. If Cgminer process on the ASIC miner is restarted, the Mining Uptime will reset although the system didn't reboot.I found a problem trying to get on information tab the system uptime:
Please, it will be nice to see the uptime system on information Tab
The Information Column has support for two kinds of uptime, the Mining Uptime and the System Uptime (OS uptime). For your ASIC miner, only Mining Uptime is supported. For Managed Miners, we can show both the Mining Uptime and also the System Uptime.
Nice!
And if the miner is not managed miner the information tab does not show any information about the uptime?
Jump to: