[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 572.

Storx

full member

Activity: 322

Merit: 233

Quote from: taosk8r on July 28, 2017, 04:46:24 PM

Man, Im having a hell of a time wrestling with the interface on this thing. I just want to setup a simple 1 GPU config for managed profit mining on mining pool hub. No matter what I do when I have my GPU in the proper place, it won't let me add a mining pool to it (button stays greyed out, and if I enter one in the settings it just doesn't show up in the mining pool tab on the bottom).

If I just run it w/o one it just says stratum authentication failed in the console window. Im going to try reinstalling it at this point out of sheer frustration, this seems like it shouldn't be any kind of hassle.

Pretty frustrating that there isn't even a simple way to remove the default (or any other miner) from the page where they are shown without getting into the arcane settings page. Doesn't make much sense..

I also cannot see any way to remove hosts once you add a new one on the managed profit miner (ok, found it in the options, but pretty awkward, again).

You have to add your worker in mining pool hub before setting up the software or it will reject your connection.... just fyi

taosk8r

newbie

Activity: 7

Merit: 0

Man, Im having a hell of a time wrestling with the interface on this thing. I just want to setup a simple 1 GPU config for managed profit mining on mining pool hub. No matter what I do when I have my GPU in the proper place, it won't let me add a mining pool to it (button stays greyed out, and if I enter one in the settings it just doesn't show up in the mining pool tab on the bottom).

If I just run it w/o one it just says stratum authentication failed in the console window. Im going to try reinstalling it at this point out of sheer frustration, this seems like it shouldn't be any kind of hassle.

Pretty frustrating that there isn't even a simple way to remove the default (or any other miner) from the page where they are shown without getting into the arcane settings page. Doesn't make much sense..

I also cannot see any way to remove hosts once you add a new one on the managed profit miner (ok, found it in the options, but pretty awkward, again).

n00bminer

member

Activity: 104

Merit: 10

Just a heads up. A small "bug" shows the Antminer R1-LTC as performing 1.2GH/s vs the reality of MH/s. The firmware is using its custom cgminer 4.8.0

LukeEl

newbie

Activity: 2

Merit: 0

Quick Question:

Should I be entering my own hashrates into the algorithms section for better profit or using the default values? Thanks!

Gongolo

full member

Activity: 374

Merit: 101

Quote from: patrike on July 27, 2017, 01:41:06 PM

Quote from: Gongolo on July 26, 2017, 04:12:57 PM

Quote from: Storx on July 26, 2017, 03:48:24 PM

Thanks bud, that actually fixed the issue and its up and running, now to move onto the next issue ill run into lol... tell you learn its all a mystery

Do you know if there is a way to add additional pools under online services?

Also, is their an ability to manually add the api for coin info? like i tried to add Signatum, i can manually add the values... but then i have to keep updating it manually....

Online services: they seems to be hardcoded, I found no way to add a new service.

Api coin info: AM already checks whattomine to get coin statistics, I don't know if it uses WTM also for custom coins (SIGT is available at WTM).
For revenue calculations, AM can get statistics from pool, but again I don't know if it works also for custom coins, I never tried, sorry.

This has been addressed in development version 3.2.1 where you can add new algorithms and online services as you want. For example the new skunk algorithm on zpool. However, don't try to add the coin Signatum as a user defined coin, because it's not included in the API from WhatToMine.com yet (but it's listed on their web site if you go to coins tab). Instead, when you create the pool, define the coin as "Unspecified skunk" based on the new algorithm. Awesome Miner should be able to figure out the profit information based on this.

Unfortunately, if you add "unspecified skunk" and use suprnova pool, Awesome Miner isn't able to calculate any profit.
May we have also suprnova in online services? It would be great.

Gongolo

full member

Activity: 374

Merit: 101

Quote from: patrike on July 27, 2017, 01:38:39 PM

Quote from: Gongolo on July 26, 2017, 10:40:28 AM

Quote from: Storx on July 26, 2017, 12:16:54 AM

Here is the settings i have for the pool....When i put in the Suprnova server url, i get a a popup to put the worker name in the wallet address, so i did at first. Tried to connect and i just get stratum authentication error, only way i can get it to actually connect is via placing it in both areas, but it never mines.. it just receives blocks and the gpu sit at 0% load....

Hello.

My pool settings with suprnova for zen:

Description: Suprnova Zencash
Server URL: stratum+tcp://zen.suprnova.cc:3618
Worker name: weblogin.worker
Worker password: x
Coin: Zencash
Wallet address:

(wallet address field is empty)

It works.

Has suprnova change the behavior recently? When I read the instructions on the web site for Zencash (https://zen.suprnova.cc/index.php?page=gettingstarted) it says the following for Claymore:

Code:

ZecMiner64.exe -zpool zen.suprnova.cc:3618 -zwal YourUsername.YourWorker -zpsw YourWorkerPass -allpools 1

This indicates that the wallet should be "YourUsername.YourWorker". For non-Claymore based zcash miners, it will probably work fine with setting it as Worker name as you did above.

I'm not saying you should change back to something that doesn't work, I just try to interpret the suprnova instructions.

Hello, nice question, probably you are right, but I don't use Claymore for mining.
I mainly run EWBF for equihash and Ccminer (tpruvot and alexis78) for other nvidia algos, so I put weblogin.workername, leaving wallet address blank in pool configuration.

Storx

full member

Activity: 322

Merit: 233

Quote from: patrike on July 27, 2017, 01:47:18 PM

Quote from: Storx on July 27, 2017, 12:19:12 AM

Has anyone gotten the remote managed miners to work?

I installed Awesome Miner Remote v3.2 on all my rigs, then i went under network scan and found them all under detect via Awesome Miner Remote and setup the same settings as i do mining the software directly on the Awesome Miner software and then press start..... nothing happens on any of the machines.. the buttons across the top go greyed out all except reboot..... so i seem to be stuck at this point... I have rebooted them, press start again and nothing but greying out the buttons occurs.....

So i added all my rigs under me using network scan again, but using detect via ccminer, this works perfectly if im mining on these rigs with my old batch file method, but if i setup the pool and miner in the awesome miner software and run the exact same ccminer as my old batch file uses, it starts up and starts mining on the pool, but the awesome miner computer (my pc in the house) says disconnect... but if i stop mining on awesome miner, start the old batch miner up they come online via the pc im trying to monitor them from...

I still am trying to figure out how to setup port forward on the 2 remote locations i have my other rigs located, it seems to be an issue with the modems being used, because using an online port checker shows the ports still blocked even tho in modem im setting them up to port forward..... sigh

The fact that the version is listed in the status column indicates that there are different version on Awesome Miner main application and the Remote Agent. Could it be that you run v3.2.1 on the main application and 3.2 on the Remote Agent? If that's the case, I recommend to upgrade the Remote Agent to the same version before trying anything else.

Hey patrike,

I just checked the website, the version of awesome miner remote is the latest available, inside the software there is no updates coming up when checking for updates. Maybe v3.2.1 has not been published?
Im currently running v3.2.1 main software and remote v3.2

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Kompik on July 28, 2017, 03:35:42 AM

Is it possible to monitor GPU solomining with this?

You can only get hashrate and mining information if you use any of the supported mining software. However, Awesome Miner will always be able to show GPU monitoring information for you. See screenshot below for an example of what you always get on the System tab, no matter what mining software you run or if you do solo mining. This works on all remote systems as well where you have Awesome Miner Remote Agent running.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: mjmeans on July 27, 2017, 06:55:22 PM

Awesome Miner profit mining really needs benchmark adjustments. When my rig is mining ETH solely using claymore I get 84 MH/s. When it is mining ETH+SC I get only 56 MH/s ETH. There is no way the 1670 MH/s SC compensates for a loss of nearly 30 MH/s ETH. Awesome Miner needs to consider the actual performance on single algos and performance for each combination of dual algos for each a rig to determine what is better profit. MPM out performs AM in this respect because it applies combination benchmark results to determine which is combination is higher profit.

For now I need to completely disable dual coin profit mining. How do I do that?

Benchmarking and improvements to the profit switcher are on the list of features to implement.

To disable dual mining in the Claymore miner, you can provide the command line parameter "-mode 1". To do this for the profit switcher, go to Options dialog, Profit profile section, edit your profile, select the Claymore Ethereum miner and click configure. Add the command line parameter here.

Kompik

sr. member

Activity: 463

Merit: 250

Is it possible to monitor GPU solomining with this?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: samm1129 on July 27, 2017, 06:36:11 PM

After update to 3.2.1 Dev, executable wouldn't load, had to downgrade back to 3.2
any timeframe on the fix?

Please send me the log file (toolbar: Tools -> Log file, or in folder: %localappdata%\AwesomeMiner) and I will investigate why it failed to load for you.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: rsup on July 27, 2017, 05:24:24 PM

Quote from: patrike on August 20, 2014, 01:37:02 AM

I will investigate if future versions of the Awesome Miner Remote Service can be used to forward the connections to other miners, like your Antminers, on the same remote network

Has this ever been implemented?

I'm getting a few antminers on a remote network where I don't have control of the router so I can't port forward.

Otherwise, can I install the manager on a machine in that remote network and still use the manager in the local network? Would the local one be able to use the data that it gets from the remote manager?

It's not implemented because VPN is often a better solution when you connect to multiple miners on a remote site.

Although you can connect multiple Awesome Miner applications to the same Antminers, you cannot connect one Awesome Miner instance to another Awesome Miner.

It sounds like you are allowed to install software on the remote site, so my recommendation is to install VPN software in this scenario.

cashen

sr. member

Activity: 434

Merit: 251

Please add SIGT Signatum

mjmeans

newbie

Activity: 21

Merit: 0

Awesome Miner profit mining really needs benchmark adjustments. When my rig is mining ETH solely using claymore I get 84 MH/s. When it is mining ETH+SC I get only 56 MH/s ETH. There is no way the 1670 MH/s SC compensates for a loss of nearly 30 MH/s ETH. Awesome Miner needs to consider the actual performance on single algos and performance for each combination of dual algos for each a rig to determine what is better profit. MPM out performs AM in this respect because it applies combination benchmark results to determine which is combination is higher profit.

For now I need to completely disable dual coin profit mining. How do I do that?

samm1129

member

Activity: 98

Merit: 10

After update to 3.2.1 Dev, executable wouldn't load, had to downgrade back to 3.2
any timeframe on the fix?

rsup

newbie

Activity: 29

Merit: 0

Quote from: patrike on August 20, 2014, 01:37:02 AM

I will investigate if future versions of the Awesome Miner Remote Service can be used to forward the connections to other miners, like your Antminers, on the same remote network

Has this ever been implemented?

I'm getting a few antminers on a remote network where I don't have control of the router so I can't port forward.

Otherwise, can I install the manager on a machine in that remote network and still use the manager in the local network? Would the local one be able to use the data that it gets from the remote manager?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: JACKSEG on July 27, 2017, 06:46:53 AM

Hello,

Profit switching is not correct in change for me.

If I stop manually and I start, it choose the most advantageous in "Online Services"
The automatic switch changes but remains, always or almost always, on the same algorithm.

I have a hard understanding how auto-profit works

Thanks.

I have identified a problem based on the logs from another user. However, do confirm that it's the same, could you share some details on which mining software and algorithm that was running, and which one it was expected to switch to?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Storx on July 27, 2017, 12:19:12 AM

Has anyone gotten the remote managed miners to work?

I installed Awesome Miner Remote v3.2 on all my rigs, then i went under network scan and found them all under detect via Awesome Miner Remote and setup the same settings as i do mining the software directly on the Awesome Miner software and then press start..... nothing happens on any of the machines.. the buttons across the top go greyed out all except reboot..... so i seem to be stuck at this point... I have rebooted them, press start again and nothing but greying out the buttons occurs.....

So i added all my rigs under me using network scan again, but using detect via ccminer, this works perfectly if im mining on these rigs with my old batch file method, but if i setup the pool and miner in the awesome miner software and run the exact same ccminer as my old batch file uses, it starts up and starts mining on the pool, but the awesome miner computer (my pc in the house) says disconnect... but if i stop mining on awesome miner, start the old batch miner up they come online via the pc im trying to monitor them from...

I still am trying to figure out how to setup port forward on the 2 remote locations i have my other rigs located, it seems to be an issue with the modems being used, because using an online port checker shows the ports still blocked even tho in modem im setting them up to port forward..... sigh

The fact that the version is listed in the status column indicates that there are different version on Awesome Miner main application and the Remote Agent. Could it be that you run v3.2.1 on the main application and 3.2 on the Remote Agent? If that's the case, I recommend to upgrade the Remote Agent to the same version before trying anything else.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: s3c70r on July 26, 2017, 05:30:26 PM

I have the pro license and today my electricity went down for an hour.

Once the electricity was back up my rigs did boot up but the awesome miner did not try to restart the miners. They all where in "stopped" state.

Once my electricity came back, it powered my modem/routers but this takes a couple of minutes before I'm back online.

Awesome miner must have tried to start the processes but since it failed to mine ( no internet connection YET ) it stopped after a couple of retries.

After 3 ( i think ) retries awesomeMiner stops retrying and we have to manually start the miner process on each rig.

Is there a way to make it try to start the miner process undefinately in a forever loop ?

Thank for the support.

Awesome Miner will start all Managed Miners where "Autostart" has been checked. This could probably be improved by automatically doing it for exactly those miners that were running at the time of the crash.

You can define a rule (Options dialog, Rules section) that triggers when a miner has 3 failed start attempts. As an action, you could as a Miner command to start the miner again.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Gongolo on July 26, 2017, 04:12:57 PM

Quote from: Storx on July 26, 2017, 03:48:24 PM

Thanks bud, that actually fixed the issue and its up and running, now to move onto the next issue ill run into lol... tell you learn its all a mystery

Do you know if there is a way to add additional pools under online services?

Also, is their an ability to manually add the api for coin info? like i tried to add Signatum, i can manually add the values... but then i have to keep updating it manually....

Online services: they seems to be hardcoded, I found no way to add a new service.

Api coin info: AM already checks whattomine to get coin statistics, I don't know if it uses WTM also for custom coins (SIGT is available at WTM).
For revenue calculations, AM can get statistics from pool, but again I don't know if it works also for custom coins, I never tried, sorry.

This has been addressed in development version 3.2.1 where you can add new algorithms and online services as you want. For example the new skunk algorithm on zpool. However, don't try to add the coin Signatum as a user defined coin, because it's not included in the API from WhatToMine.com yet (but it's listed on their web site if you go to coins tab). Instead, when you create the pool, define the coin as "Unspecified skunk" based on the new algorithm. Awesome Miner should be able to figure out the profit information based on this.

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 572. (Read 703512 times)