Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 573. (Read 703512 times)

Has suprnova change the behavior recently? When I read the instructions on the web site for Zencash (https://zen.suprnova.cc/index.php?page=gettingstarted) it says the following for Claymore:
This indicates that the wallet should be "YourUsername.YourWorker". For non-Claymore based zcash miners, it will probably work fine with setting it as Worker name as you did above.

I'm not saying you should change back to something that doesn't work, I just try to interpret the suprnova instructions.

I'm not able to reproduce this problem. When you create either a Trigger Script or and Action Script, you already get this out of the box. Example for a newly created Action script:

This one compiles just fine when I click Validate Syntax. Did you try the same?

Linux miners are added as External Miner:
http://www.awesomeminer.com/help/externalwizard.aspx

I've fixed the problem with Save Hashrate for user defined algorithms. This will be included in the next release.

Bumping to next page.. still stuck

Hello,

Profit switching is not correct in change for me.

If I stop manually and I start, it choose the most advantageous in "Online Services"
The automatic switch changes but remains, always or almost always, on the same algorithm.

I have a hard understanding how auto-profit works

Thanks.

Has anyone gotten the remote managed miners to work?

I installed Awesome Miner Remote v3.2 on all my rigs, then i went under network scan and found them all under detect via Awesome Miner Remote and setup the same settings as i do mining the software directly on the Awesome Miner software and then press start..... nothing happens on any of the machines.. the buttons across the top go greyed out all except reboot..... so i seem to be stuck at this point... I have rebooted them, press start again and nothing but greying out the buttons occurs.....

So i added all my rigs under me using network scan again, but using detect via ccminer, this works perfectly if im mining on these rigs with my old batch file method, but if i setup the pool and miner in the awesome miner software and run the exact same ccminer as my old batch file uses, it starts up and starts mining on the pool, but the awesome miner computer (my pc in the house) says disconnect... but if i stop mining on awesome miner, start the old batch miner up they come online via the pc im trying to monitor them from...

I still am trying to figure out how to setup port forward on the 2 remote locations i have my other rigs located, it seems to be an issue with the modems being used, because using an online port checker shows the ports still blocked even tho in modem im setting them up to port forward..... sigh

I have the pro license and today my electricity went down for an hour.

Once the electricity was back up my rigs did boot up but the awesome miner did not try to restart the miners. They all where in "stopped" state.

Once my electricity came back, it powered my modem/routers but this takes a couple of minutes before I'm back online.

Awesome miner must have tried to start the processes but since it failed to mine ( no internet connection YET ) it stopped after a couple of retries.

After 3 ( i think ) retries awesomeMiner stops retrying and we have to manually start the miner process on each rig.

Is there a way to make it try to start the miner process undefinately in a forever loop ?

Thank for the support.

Online services: they seems to be hardcoded, I found no way to add a new service.

Api coin info: AM already checks whattomine to get coin statistics, I don't know if it uses WTM also for custom coins (SIGT is available at WTM).
For revenue calculations, AM can get statistics from pool, but again I don't know if it works also for custom coins, I never tried, sorry.

Thanks bud, that actually fixed the issue and its up and running, now to move onto the next issue ill run into lol... tell you learn its all a mystery


Do you know if there is a way to add additional pools under online services?

Also, is their an ability to manually add the api for coin info? like i tried to add Signatum, i can manually add the values... but then i have to keep updating it manually....

Try to force the algo you want to use. that "auto" seems to be the algorithm.
In your miner properties, click "command line" and add:   -a skunk
Click OK and try.

I did exactly what you said and let it run for a while, then came back to 0 shares processed... i think the issue im having is it is stuck in this "auto" mode, it has no clue what type of block it is or something. AM does not have skunk or signatum add yet, so i manually added skunk algo under algo in options and then under coins i added signatum with algo skunk... but still not working.... not sure how to get it out of auto mode. I have tried multiple different ccminers and they all get stuck in this auto mode...

Does anyone have an example on how to get started with the C# interfaces? I've been doing C# for a couple years but getting started with new tools is always a problem..

EDIT: Grrr the documentation appears to be totally out of date. The documented example of


Says that SriptManager does not exist. I even tried referencing all the AwesomeMiner DLLs in addition to the ScriptInterface. Nada. Hopefully dev can reply soon..

Hello.

My pool settings with suprnova for zen:

Description:  Suprnova Zencash
Server URL:  stratum+tcp://zen.suprnova.cc:3618
Worker name:  weblogin.worker
Worker password:  x
Coin:  Zencash
Wallet address:

(wallet address field is empty)

It works.

I also like AM have NiceHash Miner support.

https://www.nicehash.com/index.jsp?p=api

https://github.com/nicehash/NiceHashMiner/wiki

Thank you, I will do so.

I know Patrike is busy traveling,

So i wanted to ask others if anyone has gotten Suprnova to work on Awesome Miner, recently i have kinda run into a issue zpool... i started mining the new Skunk algo on that pool, because i was one the very first i received a lot of block rewards and coins, but the pay was not adding up. I followed the coins i mined from immature, to mature, to exchanged and logged all the payouts over the course of the day... the highest i was actually payed was 83% of the LOWEST exchange rate during the 8 hours i mined those coins.. most payouts was around 74% of lowest exchange rate..

So since that little issue i have started mining skunk on suprnova directly and im actually getting paid the correct shares equal the same amount of coins i was mining on zpool, just not getting shorted on the exchange to btc....

Here is the diagnostic data... i think the issue im having is its stuck on "auto" algo when it connects, dont know how to change that in the software.

Mining Engine Process started, PID: 872

====================================================================================================
> *** ccminer SkunkSPmod2 for nVidia GPUs from alexis78@github ***
> *** Built with VC++ 2013 and nVidia CUDA SDK 8.0 (û¼ÙJ)
>
> *** Based on tpruvot@github ccminer
> *** Originally based on Christian Buchner and Christian H. project
> *** Include some of the work of djm34, sp, tsiv and klausT.
>
> [2017-07-26 01:01:16] Starting on stratum+tcp://sigt.suprnova.cc:7106
> [2017-07-26 01:01:16] NVML GPU monitoring enabled.
> [2017-07-26 01:01:16] 3 miner threads started, using 'auto' algorithm.
> [2017-07-26 01:01:17] Stratum difficulty set to 0.01

====================================================================================================
Stopping miner process ...
Stopping Mining Software
Diagnostics completed


Here is the settings i have for the pool....When i put in the Suprnova server url, i get a a popup to put the worker name in the wallet address, so i did at first. Tried to connect and i just get stratum authentication error, only way i can get it to actually connect is via placing it in both areas, but it never mines.. it just receives blocks and the gpu sit at 0% load....

The workaround is to delete the default .cfg file that EWBF comes with, otherwise you end up mining full time for someone else.

Hello.

Maybe I am wrong, but I did as follows.
Since I only have nvidia cards, looking at whattomine I see that it always suggests the following coins: hush, zen, zec, zclassic.
So I added a pool group, with 4 suprnova pools, one for each coin.
Then I added a profit miner, with an "equihash only" profit switching profile, with only EWBF enabled.
In profit switching, I enabled "custom pools", selecting the suprnova pools group.

Starting my new miner, EWBF connect to dwarfpool, that I never configured (maybe that's EWBF default?).

Just to understand: can I use a pools group to make awesome miner switch after checking the most profitable coin at whattomine?

Thank you.

Bug report:

Profit switching insists on using EWBF 0.3.4b for NoeoScrypt coins/pools even though EWBF by default is disabled for all algorithms except Equihash (under Managed software.)
This results to EWBF complaining it's receiving the wrong work and producing zero hashes but keeps on running unless stopped or its switching minutes are up.

Using Development Version 3.2.1


But I think AM should be stopping any running software that produce zero hashing for any reason for more than x minutes. That way bugs like this or other issues won't matter so much.