[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 58.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Pe_Da on March 03, 2021, 02:53:23 AM

Quote from: patrike on March 01, 2021, 12:40:29 PM

Awesome Miner version 8.3.1

GPU mining
  - Easier to both apply and save the overclocking for a specific miner
  - Allow lower voltage to be set for AMD 5000-series on Linux
  - Added additional coin images
Features
  - A Remote Proxy (used for large scale mining operations) can be configured to act as a web proxy
Integration
  - Nicehash pool regions updated. NOTE: If you use Nicehash mining, please ensure the closest region is selected in the Options dialog, Profit switching section, after the upgrade.
Mining software
  - SrbMiner Multi 0.6.8
Corrections
  - Correction to display of Nicehash balance for external addresses
  - Correction to log rotation of Remote Agent and Remote Proxy
  - Correction to Remote Proxy automatic miner discovery based on the IP range syntax
  - Correction to a profit switching scenario if a miner recently was converted from a Managed Miner to a Managed Profit Miner

Unfortunately still don´t work with HiveOn.
But what is that? There are also without function ....

It was added to this Profit Switching list by mistake, it wasn't intended to be included in this list and I will remove it in the next release. The idea is to simply detect if you are mining on this pool and it would provide the profitability. I will also make a correction to this feature in the next release.

Pe_Da

jr. member

Activity: 58

Merit: 5

Quote from: patrike on March 01, 2021, 12:40:29 PM

Awesome Miner version 8.3.1

GPU mining
  - Easier to both apply and save the overclocking for a specific miner
  - Allow lower voltage to be set for AMD 5000-series on Linux
  - Added additional coin images
Features
  - A Remote Proxy (used for large scale mining operations) can be configured to act as a web proxy
Integration
  - Nicehash pool regions updated. NOTE: If you use Nicehash mining, please ensure the closest region is selected in the Options dialog, Profit switching section, after the upgrade.
Mining software
  - SrbMiner Multi 0.6.8
Corrections
  - Correction to display of Nicehash balance for external addresses
  - Correction to log rotation of Remote Agent and Remote Proxy
  - Correction to Remote Proxy automatic miner discovery based on the IP range syntax
  - Correction to a profit switching scenario if a miner recently was converted from a Managed Miner to a Managed Profit Miner

Unfortunately still don´t work with HiveOn.
But what is that? There are also without function ....

joseph32

member

Activity: 418

Merit: 21

@FlensGold:

Vegas can do 50-51 MH/s. But this is nothing for the AM-thread, because its an user error. If you have questions, ask in the TRM thread.

1) Get the 18.6.1 driver from https://www.guru3d.com/files-categories/videocards-ati-catalyst-vista-win-7.html
2) DDU your old drivers with https://www.guru3d.com/files-details/display-driver-uninstaller-download.html and install the 18.6.1
3) Go to the TeamRedMiner thread: https://bitcointalksearch.org/topic/ann-teamredminer-v01010-ironfishkaspazilkawpowetchash-and-more-5059817
4) Do every single step inside the vega guide in the folder and clock your cards the same as in my picture. Some Vegas can also run with just 0.90 V (which will drop the wattage below 200W), but you have to test this for every single card.
5) Thats all.

Dalba

newbie

Activity: 92

Merit: 0

Quote from: patrike on March 02, 2021, 07:20:57 AM

Quote from: Dalba on March 01, 2021, 04:17:31 PM

Quote from: patrike on March 01, 2021, 12:40:29 PM

Hello,
Whatever region i select for nicehash, it always connect to nhmp-ssl.usa.nicehash.com:443....
Could you check this problem please ?

Thanks for the feedback. I assume you are running the Excavator mining software here? It's a bit of a special case and I will take care of this one as well.

Yes, you're right. I should have precise i use excavator.

FlensGold

legendary

Activity: 1405

Merit: 1001

Quote from: sxemini on March 02, 2021, 08:21:09 AM

Quote from: FlensGold on March 02, 2021, 07:25:15 AM

Quote from: patrike on March 01, 2021, 12:39:20 PM

Quote from: FlensGold on March 01, 2021, 09:07:22 AM

Hey guys,
I am not sure if this is the right forum, but I hope you do not mind if it isn't.
Due to the exploding ETH prices I unpacked my old mining rig running awesome miner (at least this fits to the thread) and added 2 Sapphire Vega (56 + 64) GPUs and a Sapphire RX5700XT.
The 5700XT is running fine, but I do not get the Vegas hash for more that 10MH/s on ethmining. Does anyone have an idea what can be the reason for this?
I did not overclock them yet, although I would like to test this. But I would expect a bit higher hashrate even with default timings.
I would appreciate if someone has an idea or could push me into the right direction. The system is running on a Win10 professional machine using the latest Radeon Software.
Thanks and kind regards

@patrike: Keep up the good work. I just installed this software after 2 years of absence and it is looking great :-)

Welcome back and thanks for the nice feedback!

Vega should be able to do at least 40 MH/s although I've not been running any Vega GPUs myself recently. There are a number of mining software (Phoenix Miner, ...) that can mine Ethereum. Have you tested with several of them already and still get this result?

Tested it with Phoenix Miner and lolminer, both same result with 9/10 MH/s. No Idea what is going wrong here...

Is compute mode turned on in the driver for every card? Use teamred or lolminer and not this shitty phönixminer

Hello,
actually I am not sure about the compute mode. I can not find it in my radeon settings, no matter if I try latest drivers or 17.9.1.
I have been using google the last hour finding some tutorials for checking this, but for some reason I do not have that option where it should be.
Do you know a version where this option will be available?
BR

Edit:
Found this thread and was able to switch to compute mode with this: https://bitcointalksearch.org/topic/tool-amd-compute-switcher-for-switch-automatically-to-compute-mode-2815803

Unfortunately the GPU is still running at 10MH/s. But when I try to apply GPU overclocking settings Awesome Miner returns "Failed to update the following hosts: localhost

I still appreciate any suggestions :-)
Kind regards

P.S.:
I have testing lolminer this morning, but got almost the same results

sxemini

member

Activity: 1558

Merit: 69

Quote from: FlensGold on March 02, 2021, 07:25:15 AM

Quote from: patrike on March 01, 2021, 12:39:20 PM

Quote from: FlensGold on March 01, 2021, 09:07:22 AM

Hey guys,
I am not sure if this is the right forum, but I hope you do not mind if it isn't.
Due to the exploding ETH prices I unpacked my old mining rig running awesome miner (at least this fits to the thread) and added 2 Sapphire Vega (56 + 64) GPUs and a Sapphire RX5700XT.
The 5700XT is running fine, but I do not get the Vegas hash for more that 10MH/s on ethmining. Does anyone have an idea what can be the reason for this?
I did not overclock them yet, although I would like to test this. But I would expect a bit higher hashrate even with default timings.
I would appreciate if someone has an idea or could push me into the right direction. The system is running on a Win10 professional machine using the latest Radeon Software.
Thanks and kind regards

@patrike: Keep up the good work. I just installed this software after 2 years of absence and it is looking great :-)

Welcome back and thanks for the nice feedback!

Vega should be able to do at least 40 MH/s although I've not been running any Vega GPUs myself recently. There are a number of mining software (Phoenix Miner, ...) that can mine Ethereum. Have you tested with several of them already and still get this result?

Tested it with Phoenix Miner and lolminer, both same result with 9/10 MH/s. No Idea what is going wrong here...

Is compute mode turned on in the driver for every card? Use teamred or lolminer and not this shitty phönixminer

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: narousberg on March 01, 2021, 09:46:15 PM

Hi Patrike, i have some suggestion for new Nicehash regions. Maybe its a good idea to add a region override function to the miner object level. In my case i have rigs on different location and choosing only one region is not a best selection.

Regards.

Thanks for the suggestion. Although I agree that it can make sense if you have a really distributed mining setup, I don't think it's that common among users to have their miners spread out across large areas.

FlensGold

legendary

Activity: 1405

Merit: 1001

Quote from: patrike on March 01, 2021, 12:39:20 PM

Quote from: FlensGold on March 01, 2021, 09:07:22 AM

Hey guys,
I am not sure if this is the right forum, but I hope you do not mind if it isn't.
Due to the exploding ETH prices I unpacked my old mining rig running awesome miner (at least this fits to the thread) and added 2 Sapphire Vega (56 + 64) GPUs and a Sapphire RX5700XT.
The 5700XT is running fine, but I do not get the Vegas hash for more that 10MH/s on ethmining. Does anyone have an idea what can be the reason for this?
I did not overclock them yet, although I would like to test this. But I would expect a bit higher hashrate even with default timings.
I would appreciate if someone has an idea or could push me into the right direction. The system is running on a Win10 professional machine using the latest Radeon Software.
Thanks and kind regards

@patrike: Keep up the good work. I just installed this software after 2 years of absence and it is looking great :-)

Welcome back and thanks for the nice feedback!

Vega should be able to do at least 40 MH/s although I've not been running any Vega GPUs myself recently. There are a number of mining software (Phoenix Miner, ...) that can mine Ethereum. Have you tested with several of them already and still get this result?

Tested it with Phoenix Miner and lolminer, both same result with 9/10 MH/s. No Idea what is going wrong here...

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Dalba on March 01, 2021, 04:17:31 PM

Quote from: patrike on March 01, 2021, 12:40:29 PM

Hello,
Whatever region i select for nicehash, it always connect to nhmp-ssl.usa.nicehash.com:443....
Could you check this problem please ?

Thanks for the feedback. I assume you are running the Excavator mining software here? It's a bit of a special case and I will take care of this one as well.

narousberg

legendary

Activity: 1753

Merit: 1007

Hi Patrike, i have some suggestion for new Nicehash regions. Maybe its a good idea to add a region override function to the miner object level. In my case i have rigs on different location and choosing only one region is not a best selection.

Regards.

Dalba

newbie

Activity: 92

Merit: 0

Quote from: patrike on March 01, 2021, 12:40:29 PM

Awesome Miner version 8.3.1

GPU mining
- Easier to both apply and save the overclocking for a specific miner
- Allow lower voltage to be set for AMD 5000-series on Linux
- Added additional coin images
Features
- A Remote Proxy (used for large scale mining operations) can be configured to act as a web proxy
Integration
- Nicehash pool regions updated. NOTE: If you use Nicehash mining, please ensure the closest region is selected in the Options dialog, Profit switching section, after the upgrade.
Mining software
- SrbMiner Multi 0.6.8
Corrections
- Correction to display of Nicehash balance for external addresses
- Correction to log rotation of Remote Agent and Remote Proxy
- Correction to Remote Proxy automatic miner discovery based on the IP range syntax
- Correction to a profit switching scenario if a miner recently was converted from a Managed Miner to a Managed Profit Miner

Hello,
Whatever region i select for nicehash, it always connect to nhmp-ssl.usa.nicehash.com:443....
Could you check this problem please ?

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 8.3.1

GPU mining
- Easier to both apply and save the overclocking for a specific miner
- Allow lower voltage to be set for AMD 5000-series on Linux
- Added additional coin images
Features
- A Remote Proxy (used for large scale mining operations) can be configured to act as a web proxy
Integration
- Nicehash pool regions updated. NOTE: If you use Nicehash mining, please ensure the closest region is selected in the Options dialog, Profit switching section, after the upgrade.
Mining software
- SrbMiner Multi 0.6.8
Corrections
- Correction to display of Nicehash balance for external addresses
- Correction to log rotation of Remote Agent and Remote Proxy
- Correction to Remote Proxy automatic miner discovery based on the IP range syntax
- Correction to a profit switching scenario if a miner recently was converted from a Managed Miner to a Managed Profit Miner

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: FlensGold on March 01, 2021, 09:07:22 AM

Hey guys,
I am not sure if this is the right forum, but I hope you do not mind if it isn't.
Due to the exploding ETH prices I unpacked my old mining rig running awesome miner (at least this fits to the thread) and added 2 Sapphire Vega (56 + 64) GPUs and a Sapphire RX5700XT.
The 5700XT is running fine, but I do not get the Vegas hash for more that 10MH/s on ethmining. Does anyone have an idea what can be the reason for this?
I did not overclock them yet, although I would like to test this. But I would expect a bit higher hashrate even with default timings.
I would appreciate if someone has an idea or could push me into the right direction. The system is running on a Win10 professional machine using the latest Radeon Software.
Thanks and kind regards

@patrike: Keep up the good work. I just installed this software after 2 years of absence and it is looking great :-)

Welcome back and thanks for the nice feedback!

Vega should be able to do at least 40 MH/s although I've not been running any Vega GPUs myself recently. There are a number of mining software (Phoenix Miner, ...) that can mine Ethereum. Have you tested with several of them already and still get this result?

FlensGold

legendary

Activity: 1405

Merit: 1001

Hey guys,
I am not sure if this is the right forum, but I hope you do not mind if it isn't.
Due to the exploding ETH prices I unpacked my old mining rig running awesome miner (at least this fits to the thread) and added 2 Sapphire Vega (56 + 64) GPUs and a Sapphire RX5700XT.
The 5700XT is running fine, but I do not get the Vegas hash for more that 10MH/s on ethmining. Does anyone have an idea what can be the reason for this?
I did not overclock them yet, although I would like to test this. But I would expect a bit higher hashrate even with default timings.
I would appreciate if someone has an idea or could push me into the right direction. The system is running on a Win10 professional machine using the latest Radeon Software.
Thanks and kind regards

@patrike: Keep up the good work. I just installed this software after 2 years of absence and it is looking great :-)

Update:
Just adding a screenshot including the timings for my Sapphire RX5700 XT (1500 Core, 1850 Mem, 900mV) which is performing well (at least I do think so):

Just wondering why the Power in Awesome Miner (176W) is different to the one shown in phoenixminer (131W).

Maybe someone has timings for Sapphire Vega 56 / 64 which I could test?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: forato on February 24, 2021, 11:21:44 AM

Quote from: patrike on February 23, 2021, 10:21:17 AM

Awesome Miner version 8.3

User interface
  - New Awesome Miner logo
Features
  - Open ASIC miner configuration page via the Awesome Miner web interface
  - Heat map boxes in web interface will automatically resize to a bit smaller size for larger heatmaps
Integration
  - Display of revenue when mining on HiveOn pool
Mining software
  - Gminer 2.45
  - XmRig 6.9

Great Logo, but on web we still see the old one..

Thanks for the nice feedback. We updated the main web site only hours after the release. In case the old logo was loaded from a cache, please try to press CTRL+F5 to force a refresh. For the cloud web we will soon make the same update.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Grumo on February 24, 2021, 03:07:30 AM

Hello patrike
I have some issues installing awm remote control, with the last update i cannot install it anymore

I cant run it on this rig
The rig has installed windows 10 last build
It has all the dep installed .
CPU i3 6100 8gb ram

Hi,

I would recommend you to reboot once, remove the downloaded MSI-file, then download it again and give it another try. There are no recent changes to the installer so there is something else preventing it from running successfully.

Pe_Da

jr. member

Activity: 58

Merit: 5

Quote from: patrike on February 23, 2021, 05:04:55 PM

Quote from: Pe_Da on February 23, 2021, 10:40:15 AM

Quote from: patrike on February 23, 2021, 10:21:17 AM

Awesome Miner version 8.3

User interface
  - New Awesome Miner logo
Features
  - Open ASIC miner configuration page via the Awesome Miner web interface
  - Heat map boxes in web interface will automatically resize to a bit smaller size for larger heatmaps
Integration
  - Display of revenue when mining on HiveOn pool
Mining software
  - Gminer 2.45
  - XmRig 6.9

Unfortunately do not work currently, HiveOn displays zero profit per day ....

Please select "Unspecified Ethereum" as coin for the pool. If it still isn't working, can you please send me the API report for this miner via PM (toolbar: Tools -> API Report). Thanks!

Already done, no effect!
Send you an PM.

Thank you!

forato

full member

Activity: 237

Merit: 100

Quote from: patrike on February 23, 2021, 10:21:17 AM

Awesome Miner version 8.3

User interface
- New Awesome Miner logo
Features
- Open ASIC miner configuration page via the Awesome Miner web interface
- Heat map boxes in web interface will automatically resize to a bit smaller size for larger heatmaps
Integration
- Display of revenue when mining on HiveOn pool
Mining software
- Gminer 2.45
- XmRig 6.9

Great Logo, but on web we still see the old one..

Grumo

member

Activity: 430

Merit: 22

Professional user

Hello patrike
I have some issues installing awm remote control, with the last update i cannot install it anymore

I cant run it on this rig
The rig has installed windows 10 last build
It has all the dep installed .
CPU i3 6100 8gb ram

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Pe_Da on February 23, 2021, 10:40:15 AM

Quote from: patrike on February 23, 2021, 10:21:17 AM

Awesome Miner version 8.3

User interface
  - New Awesome Miner logo
Features
  - Open ASIC miner configuration page via the Awesome Miner web interface
  - Heat map boxes in web interface will automatically resize to a bit smaller size for larger heatmaps
Integration
  - Display of revenue when mining on HiveOn pool
Mining software
  - Gminer 2.45
  - XmRig 6.9

Unfortunately do not work currently, HiveOn displays zero profit per day ....

Please select "Unspecified Ethereum" as coin for the pool. If it still isn't working, can you please send me the API report for this miner via PM (toolbar: Tools -> API Report). Thanks!

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 58. (Read 703148 times)