Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 62. (Read 703113 times)

There are currently no feature to exclude specific miners from the global fan control. I've noted your request and we will investigate adding support for this. You can already today define a GPU Clocking Profile with a specific fan speed in the Properties of a miner, but it will not work when the global fan control is enabled.

Hi Patrike,

Yes i am using global fan control. Awesomeminer is setting the fan speed just fine, the issue is that i need to set the fan on the 3000 series cards higher than my other gpus.
Would it not be possible to set fan control on a per-miner basis rather than have a global fan control?

Thanks for your question.

If you are using the global fan control (Options dialog, GPU Settings section), it will be applied to all your GPUs. Is the fan speed not set correctly for the 3000-series card as the fan speed value Awesome Miner tries to set is "too low" and is being rejected?

Hi Patrike,

Would it be possible to set a minimum fan speed for certain gpus, or have an option disable fan control for certain miners?

My 3080 and 3090 cards require a higher minimum fan speed compared to my other gpus, and the only workaround i can find is to install msi afterburner and set a short interval time so that it can "override" awesomeminer's fan control

Yes, those are added as well!

This mix of GPUs or AM firmware makes the situation a bit special. You are required to have a Cloud Services subscription for the GPUs, but not for the Antminers running the AM firmware.

In general, this makes it possible to pay for fewer miners via Cloud Services. In your case you would however still have to sign up for "Professional Subscription", because it's the entry level. This one is for up to 10 miners, but you can use it for any number of Antminers running the AM firmware.

You have the old license. If you want the cloud service, you must subscribe and pay monthly.


Thanks patrike, can also add RVN and BEAM Flypool balance also? 

Hello, On my farm I Have GPU's and ASIC's.

My license: Your current license: Professional Edition (10 miners)

On my ASIC's I have the AM firmware (LTC's ASIC's)

On your website it is saying:

Mining fee
The firmware has a mining fee of either 2% or 3% (on average a bit lower, about 1.8% and 2.8%)
The mining fee is based on a parallel mining concept to avoid any interruptions to the normal mining
The firmware with a 3% mining fee includes an Awesome Miner license and doesn't consume any of the licenses available in Awesome Miner. This makes it possible to run Awesome Miner and Cloud Services without paying anything for the license as long as the firmware with a 3% mining fee is being used.


But I am tryng to acces cloud services and it is saying that I don't have the subscription plan..

How Can I solve this?

It works fine for Ethereum wallet balance when I'm testing it. Can you please open the URL in the web browser like sxemini suggested?
If you get any response here with a balance that Awesome Miner should be able to display, please let me know your Ethereum wallet address and I will try to reproduce the problem.

Thanks for the feedback. I will add support for Ethermine ETC and Flypool ZEC in the next update.

Thanks for this update. I found a bug in Ethermine Pool Balance for ETC, AM recognize it as BTC and show Update failed. ETH Pool balance for Ethermine work.
Do you plan to add flypool balance as well? Flypool is a part of ethermine.


It works! When it not work, why i get the balance? So i think the failure is at your system. Or you will try to get the balance of your exchange wallet, this is not possible on most exchanges.
If you not believe, test it in your browser dude and you will see that it works.

this default api call not work

Awesome Miner version 8.2

 ASIC mining
  - Improved API compatibility with custom Antminer firmware
 GPU mining
  - Managed Software (in the Options dialog) can be customized for Linux
 Features
  - Show hashrate and temperature graph in the details panel for the selected miner
  - Introducing the concept of Quick Access Toolbar, where you can right click on almost any toolbar button or sub menu item in the main window and add it to the Quick Access Toolbar. The command will show up as a separate button in the top left corner of the main window.
  - The highlight colors currently named Information 1, Information 2 and so on can be given a user defined description. To define a description, use the 'Rename' menu item in the Highlight Miners or Highlight Groups toolbar buttons.
  - The Information column can be configured to display the hashrate of each individual device for a miner
  - The profit switching setting for minimum time to say on a pool can now be configured for up to 999 minutes.
  - Led flash support for Antminer S15, T15, S17 and T17 running Bitmain firmware
 Integration
  - Ethermine pool balance
 Improvements
  - Improved sorting for the Information column
  - Updated default list of mining software for AMD and nVidia Profit Profiles
 Mining software
  - SrbMiner 0.6.2
  - Gminer 2.40
  - XmRig 6.7
  - T-Rex miner 0.19.5
  - NbMiner 36.0
  - Bminer 16.4.2
  - TeamRedMiner 0.7.22
  - CpuMiner-Opt 3.15.5
  - PhoenixMiner 5.4c
  - Lolminer 1.17
 Corrections
  - Correction to the link to the Nicehash web site
  - Correction to Nanominer VerusHash device reporting
  - Changed timeout for reboot of Antminer S19
  - Correction to AMD RX 5000 series overclocking on Linux

you don´t need any api for eth, only your address, patrike has set the api for eth.


this is set as default

https://api.blockcypher.com/v1/eth/main/addrs/[address]/balance

so for what you need another api???  

Hi guys, anyone know how to setup viewing ETH wallet balance in AM. What a API you use? Thanks

Ok thanks. Quarkchain is wrong calculated by CoinCalutators.io, whattomine calculate it right. I tested it with 1 GPU.
Yeah adding coins is no problem for me 

I see a big problem with Coincalculators in the future if they not clean there coins. They have so many wrong informations for coins, they support dead and scam coins also.

Version 8.1.15 (Development preview of 8.2)

 ASIC mining
  - Improved API compatibility with custom Antminer firmware
 Features
  - Led flash support for Antminer S15, T15, S17 and T17 running Bitmain firmware
 Improvements
  - Improved sorting for the Information column
  - Updated default list of mining software for AMD and nVidia Profit Profiles
 Mining software
  - SrbMiner 0.6.2
  - Gminer 2.39
  - XmRig 6.7
  - T-Rex miner 0.19.5
  - NbMiner 36.0
  - Bminer 16.4.2
  - TeamRedMiner 0.7.22
  - CpuMiner-Opt 3.15.5
  - PhoenixMiner 5.4c
 Corrections
  - Correction to AMD RX 5000 series overclocking on Linux

I will look into this one. Awesome Miner matches what CoinCalculators.io indicate on their web site, but not WhatToMine.com.

Ycash is currently not listed, as it isn't included by WhatToMine and CoinCalculators.io anymore. Awesome Miner will currently not automatically update this coin for you.

Verushash is removed from the WhatToMine main listing, so Awesome Miner will not automatically pick up the changes at the moment. You can manually add it as a custom JSON url in the Options dialog, Statistics provider section:
https://whattomine.com/coins/333.json

Awesome Miner is automatically reading the coin properties for all coins part of the main listings at WhatToMine.com and CoinCalculators.io. In some cases I need to make adjustments as the

Hi Patrike,

something is wrong with the QKC calculation.

Example:

AM says around 100 coins and around 0,45€ a day at 24.3mh
Whattomine says around 42 coins and 0,21€ a day at 24.3mh

And a 3 day test brings out 40 coins a day.

Same Ycash

AM says with 8 H/s around 92€ daily
 
I setup Ycash as new coin by myself and there i get the right result
8 H/s and 0,27€

Verushash has wrong block reward (down to 12 from 24). Are your Coin properties dynamic or static and you change everything by yourself?

Can you please use the Diagnostics button and verify the device selection on both these cases. It looks something like this "-d 0", but the number should be different for the second miner.