[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 56.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: NetWhiz on March 17, 2021, 03:58:14 PM

Quote from: patrike on March 15, 2021, 08:51:22 AM

Quote from: NetWhiz on March 14, 2021, 07:34:31 AM

Quote from: patrike on March 14, 2021, 03:21:48 AM

Quote from: NetWhiz on March 12, 2021, 09:34:52 AM

I have AM on 7 rigs. Everything runs fine. However, in the past few days one of the rigs stopped showing data. It is controlled and starts/stops the miners just fine. The console displays in AM as well. It is just the listing for the miner says the interface is offline and I can not get it to show correctly. I have uninstalled and reinstalled to no avail as well. Again, the console tab shows the remote command prompt correctly. It worked fine until a few days ago before the last update. Any ideas as to what else I can try?

Thank you.

Thanks for your question. Is this with a specific mining software only? Do you get any error messages in the mining software console window about errors related to binding to an API port?

Can you please also check that Windows didn't reconfigure your network from Private to Public or similar?

It is happening with PhoenixMiner on one rig only. AM can control the miner, but does not receive any data back to display. The startup console does not show any error with the API. The network is set to Private and the Defender firewall is off.

Log

Code:

2021.03.14:08:27:17.365: main Listening for CDM remote manager at port 4028 in full mode

When you see "Interface offline" at this point, can you please select the miner and send me the API Report (you can send via PM). You can generate the report via the toolbar Tools -> API Report. This will indicate if the mining software is responding to API requests or not.

I sent you the info in a PM as requested right after your post.

I have noticed that there seems to be some issue with not only thin rig but another now when I am running a GPU miner software (PhoenixMiner) and a CPU miner (XMRig). If i quit the CPU miner, the GPU miner interface comes back and displays correctly. As soon as I start the CPU miner, the GPU does not display. Have seen it on a second machine now as well. I am thinking the API management ports are not being set correctly to be different?

Can you please try with the latest development release of Awesome Miner (v8.3.4), planned to be made available soon?

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: invaer on March 17, 2021, 11:25:45 AM

Quote from: patrike on March 17, 2021, 03:30:59 AM

Quote from: invaer on March 15, 2021, 10:16:12 AM

But, if I copy the same launch parameters to the "Command line parameters to mining softwere" in Awesome Miner, then the miner crashes when launched in the same way.
So it's not about the launch parameters.

Please remove all command line parameters ("Parameters to mining software") you entered for the Managed Miner. Awesome Miner should automatically setup the command line. If you try to put in the same parameters manually as well, you may end up with some parameters being set twice.

I tested various launch options - nothing helped.
Usually I naturally launch without any parameters and miner crashes, as I described earlier.

1) What if you launch TeamRedMiner via Awesome Miner, then completely exit Awesome Miner right away. Is TeamRedMiner still crashing after a short while?
2) Please also make sure the virtual memory size in Windows is large enough.

Commie

full member

Activity: 621

Merit: 108

Is it possible to set fixed voltage curve in AM running on Linux? Can't find info anywhere, so far I was only able to set upper voltage limit in GPU overclocking settings.

Waytoogo

newbie

Activity: 15

Merit: 0

I'm having trouble with remote GPU mining. When Awesome Miner changes algorithm or pool it doesn't show the change.
https://i.imgur.com/j9rxm1o.jpg
The miner Server was mining Ethereum on Nicehash, then changed to ProgPow on Zergpool. As you can see Awesome miner is reporting that it is still mining on Nicehash but the miner is actually mining on Zergpool like it should be. This does not effect my mining or profit, but it would be nice to have fixed. Thank You.

NetWhiz

newbie

Activity: 49

Merit: 0

Quote from: patrike on March 15, 2021, 08:51:22 AM

Quote from: NetWhiz on March 14, 2021, 07:34:31 AM

Quote from: patrike on March 14, 2021, 03:21:48 AM

Quote from: NetWhiz on March 12, 2021, 09:34:52 AM

I have AM on 7 rigs. Everything runs fine. However, in the past few days one of the rigs stopped showing data. It is controlled and starts/stops the miners just fine. The console displays in AM as well. It is just the listing for the miner says the interface is offline and I can not get it to show correctly. I have uninstalled and reinstalled to no avail as well. Again, the console tab shows the remote command prompt correctly. It worked fine until a few days ago before the last update. Any ideas as to what else I can try?

Thank you.

Thanks for your question. Is this with a specific mining software only? Do you get any error messages in the mining software console window about errors related to binding to an API port?

Can you please also check that Windows didn't reconfigure your network from Private to Public or similar?

It is happening with PhoenixMiner on one rig only. AM can control the miner, but does not receive any data back to display. The startup console does not show any error with the API. The network is set to Private and the Defender firewall is off.

Log

Code:

2021.03.14:08:27:17.365: main Listening for CDM remote manager at port 4028 in full mode

When you see "Interface offline" at this point, can you please select the miner and send me the API Report (you can send via PM). You can generate the report via the toolbar Tools -> API Report. This will indicate if the mining software is responding to API requests or not.

I sent you the info in a PM as requested right after your post.

I have noticed that there seems to be some issue with not only thin rig but another now when I am running a GPU miner software (PhoenixMiner) and a CPU miner (XMRig). If i quit the CPU miner, the GPU miner interface comes back and displays correctly. As soon as I start the CPU miner, the GPU does not display. Have seen it on a second machine now as well. I am thinking the API management ports are not being set correctly to be different?

invaer

newbie

Activity: 5

Merit: 0

Quote from: patrike on March 17, 2021, 03:30:59 AM

Quote from: invaer on March 15, 2021, 10:16:12 AM

But, if I copy the same launch parameters to the "Command line parameters to mining softwere" in Awesome Miner, then the miner crashes when launched in the same way.
So it's not about the launch parameters.

Please remove all command line parameters ("Parameters to mining software") you entered for the Managed Miner. Awesome Miner should automatically setup the command line. If you try to put in the same parameters manually as well, you may end up with some parameters being set twice.

I tested various launch options - nothing helped.
Usually I naturally launch without any parameters and miner crashes, as I described earlier.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: invaer on March 15, 2021, 10:16:12 AM

But, if I copy the same launch parameters to the "Command line parameters to mining softwere" in Awesome Miner, then the miner crashes when launched in the same way.
So it's not about the launch parameters.

Please remove all command line parameters ("Parameters to mining software") you entered for the Managed Miner. Awesome Miner should automatically setup the command line. If you try to put in the same parameters manually as well, you may end up with some parameters being set twice.

invaer

newbie

Activity: 5

Merit: 0

Quote from: patrike on March 15, 2021, 09:41:14 AM

Quote from: invaer on March 14, 2021, 08:14:15 AM

Hi guys, there is a strange problem with TeamRedMiner 0.8.1 on the Kawpow algorithm.
TeamRedMiner has full support for Awesome Miner.
But when you start TeamRedMiner through the Awesome Miner interface, TeamRedMiner crashes at this point:
https://i.imgur.com/pIbjpVU.png
At the same time, if you start TeamRedMiner manually, then it works.
If you run diagnostics in Awesome Miner, then everything works in it.
Also Awesome Miner shows error accessing TeamRedMiner API:
https://i.imgur.com/rOMJ9Kg.png
This problem occurs on different rigs with different video cards.
All other Kawpow miners (Nanominer NBminer) work fine and have no API errors:
https://i.imgur.com/vLEGttU.png
I would be grateful if someone could help

Is the Diagnostics running long enough for the problem to happen? You can configure this the diagnostics duration via the "Advanced" button in the Diagnostics window. Running the diagnostics and simply starting the mining software should be very similar.

If you copy all the command line parameters from the Diagnostics window to a command line window and run - is it a correct understanding that it all of a sudden works fine?

For the API message - this is expected and not a fault. In most cases Awesome Miner writes "Basic" API access. For mining software based on the Cgminer/Sgminer API, the term "Restricted" is being used instead, but it's the same thing and not an error.

Yes, the diagnostics take enough time and everything is fine during the diagnostics.
Yes, if you copy all the internal lines from the "Diagnostics" window to the command line (I mean the Windows command line) and run - everything is fine.
But, if I copy the same launch parameters to the "Command line parameters to mining softwere" in Awesome Miner, then the miner crashes when launched in the same way.
So it's not about the launch parameters.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: invaer on March 14, 2021, 08:14:15 AM

Hi guys, there is a strange problem with TeamRedMiner 0.8.1 on the Kawpow algorithm.
TeamRedMiner has full support for Awesome Miner.
But when you start TeamRedMiner through the Awesome Miner interface, TeamRedMiner crashes at this point:
https://i.imgur.com/pIbjpVU.png
At the same time, if you start TeamRedMiner manually, then it works.
If you run diagnostics in Awesome Miner, then everything works in it.
Also Awesome Miner shows error accessing TeamRedMiner API:
https://i.imgur.com/rOMJ9Kg.png
This problem occurs on different rigs with different video cards.
All other Kawpow miners (Nanominer NBminer) work fine and have no API errors:
https://i.imgur.com/vLEGttU.png
I would be grateful if someone could help

Is the Diagnostics running long enough for the problem to happen? You can configure this the diagnostics duration via the "Advanced" button in the Diagnostics window. Running the diagnostics and simply starting the mining software should be very similar.

If you copy all the command line parameters from the Diagnostics window to a command line window and run - is it a correct understanding that it all of a sudden works fine?

For the API message - this is expected and not a fault. In most cases Awesome Miner writes "Basic" API access. For mining software based on the Cgminer/Sgminer API, the term "Restricted" is being used instead, but it's the same thing and not an error.

sxemini

member

Activity: 1558

Merit: 69

Quote from: patrike on March 14, 2021, 03:19:29 AM

Quote from: Siolim on March 12, 2021, 05:35:12 AM

Good afternoon, Patrike. How to run nanominer ERGO + ZIL dual mining? Thank.

Hello. This is not yet supported via Awesome Miner.

It is supported via Zilswitcher, i made an description for it. Zilswitcher can send API commands, so if you can handle API´s, you can dual mine zil with every other coin and Awesome Miner.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: NetWhiz on March 14, 2021, 07:34:31 AM

Quote from: patrike on March 14, 2021, 03:21:48 AM

Quote from: NetWhiz on March 12, 2021, 09:34:52 AM

I have AM on 7 rigs. Everything runs fine. However, in the past few days one of the rigs stopped showing data. It is controlled and starts/stops the miners just fine. The console displays in AM as well. It is just the listing for the miner says the interface is offline and I can not get it to show correctly. I have uninstalled and reinstalled to no avail as well. Again, the console tab shows the remote command prompt correctly. It worked fine until a few days ago before the last update. Any ideas as to what else I can try?

Thank you.

Thanks for your question. Is this with a specific mining software only? Do you get any error messages in the mining software console window about errors related to binding to an API port?

Can you please also check that Windows didn't reconfigure your network from Private to Public or similar?

It is happening with PhoenixMiner on one rig only. AM can control the miner, but does not receive any data back to display. The startup console does not show any error with the API. The network is set to Private and the Defender firewall is off.

Log

Code:

2021.03.14:08:27:17.365: main Listening for CDM remote manager at port 4028 in full mode

When you see "Interface offline" at this point, can you please select the miner and send me the API Report (you can send via PM). You can generate the report via the toolbar Tools -> API Report. This will indicate if the mining software is responding to API requests or not.

Commie

full member

Activity: 621

Merit: 108

Quote from: patrike on March 14, 2021, 03:28:26 AM

Quote from: Commie on March 13, 2021, 07:54:17 AM

I have AM running on Ubuntu server 18.04. A couple days ago I reinstalled the system and since then miner freezes 1-3 minutes after it starts mining, also freezing keyboard and mouse (??). First hashrate stops showing, then temperature, if I stop it it won't start again with an error, logs show nothing useful. Reinstalling AM remote agent helps to restart the miner but then the story repeats. Have anyone else experienced this? I've remover all other software leaving raw OF and AM, increased the swap file size to 50gb, nothing helps.

I don't have any great suggestions here but I just wanted to check if you tried running with another mining software in case it's only a specific one that is failing?

I guess I've created Frankenstein LOL. After a day of reinstalling everything, formatting ssd, changing batch files etc I gave up and thought it's a hardware issue - after all motherboard in this rig is almost 12 years old. So I went ahead and ordered new MB+CPU+RAM, thanks to BTC hitting new ATH that day. But yesterday I thought I'd give it another try. I have an image of HiveOS on one of my SSDs so I took it and installed AM and ETHpill on top. Surprise - it works! So my guess it after I installed Ubuntu server 18.04 it automatically downloaded some sort of new update which conflicts with AM. I have no other logical explanation of this issue. Testing Hive+AM for almost 12 hours now, so far so good. I guess I could've downloaded another version of raw Linux/Ubuntu/Debian and it'd work too, but I used what I already had.

invaer

newbie

Activity: 5

Merit: 0

Hi guys, there is a strange problem with TeamRedMiner 0.8.1 on the Kawpow algorithm.
TeamRedMiner has full support for Awesome Miner.
But when you start TeamRedMiner through the Awesome Miner interface, TeamRedMiner crashes at this point:
https://i.imgur.com/pIbjpVU.png
At the same time, if you start TeamRedMiner manually, then it works.
If you run diagnostics in Awesome Miner, then everything works in it.
Also Awesome Miner shows error accessing TeamRedMiner API:
https://i.imgur.com/rOMJ9Kg.png
This problem occurs on different rigs with different video cards.
All other Kawpow miners (Nanominer NBminer) work fine and have no API errors:
https://i.imgur.com/vLEGttU.png
I would be grateful if someone could help

NetWhiz

newbie

Activity: 49

Merit: 0

Quote from: patrike on March 14, 2021, 03:28:26 AM

Quote from: Commie on March 13, 2021, 07:54:17 AM

I have AM running on Ubuntu server 18.04. A couple days ago I reinstalled the system and since then miner freezes 1-3 minutes after it starts mining, also freezing keyboard and mouse (??). First hashrate stops showing, then temperature, if I stop it it won't start again with an error, logs show nothing useful. Reinstalling AM remote agent helps to restart the miner but then the story repeats. Have anyone else experienced this? I've remover all other software leaving raw OF and AM, increased the swap file size to 50gb, nothing helps.

I don't have any great suggestions here but I just wanted to check if you tried running with another mining software in case it's only a specific one that is failing?

Thank you. I just tried Claymore again and it does the same thing. One thing to note is that I also run XMRig for CPU mining on the rigs and for this rig the data IS displayed for XMRig. It is only the GPU mining data that is not being displayed.

NetWhiz

newbie

Activity: 49

Merit: 0

Quote from: patrike on March 14, 2021, 03:21:48 AM

Quote from: NetWhiz on March 12, 2021, 09:34:52 AM

I have AM on 7 rigs. Everything runs fine. However, in the past few days one of the rigs stopped showing data. It is controlled and starts/stops the miners just fine. The console displays in AM as well. It is just the listing for the miner says the interface is offline and I can not get it to show correctly. I have uninstalled and reinstalled to no avail as well. Again, the console tab shows the remote command prompt correctly. It worked fine until a few days ago before the last update. Any ideas as to what else I can try?

Thank you.

Thanks for your question. Is this with a specific mining software only? Do you get any error messages in the mining software console window about errors related to binding to an API port?

Can you please also check that Windows didn't reconfigure your network from Private to Public or similar?

It is happening with PhoenixMiner on one rig only. AM can control the miner, but does not receive any data back to display. The startup console does not show any error with the API. The network is set to Private and the Defender firewall is off.

Log

Code:

2021.03.14:08:27:17.365: main Listening for CDM remote manager at port 4028 in full mode

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Commie on March 13, 2021, 07:54:17 AM

I have AM running on Ubuntu server 18.04. A couple days ago I reinstalled the system and since then miner freezes 1-3 minutes after it starts mining, also freezing keyboard and mouse (??). First hashrate stops showing, then temperature, if I stop it it won't start again with an error, logs show nothing useful. Reinstalling AM remote agent helps to restart the miner but then the story repeats. Have anyone else experienced this? I've remover all other software leaving raw OF and AM, increased the swap file size to 50gb, nothing helps.

I don't have any great suggestions here but I just wanted to check if you tried running with another mining software in case it's only a specific one that is failing?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: NetWhiz on March 12, 2021, 09:34:52 AM

I have AM on 7 rigs. Everything runs fine. However, in the past few days one of the rigs stopped showing data. It is controlled and starts/stops the miners just fine. The console displays in AM as well. It is just the listing for the miner says the interface is offline and I can not get it to show correctly. I have uninstalled and reinstalled to no avail as well. Again, the console tab shows the remote command prompt correctly. It worked fine until a few days ago before the last update. Any ideas as to what else I can try?

Thank you.

Thanks for your question. Is this with a specific mining software only? Do you get any error messages in the mining software console window about errors related to binding to an API port?

Can you please also check that Windows didn't reconfigure your network from Private to Public or similar?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Siolim on March 12, 2021, 05:35:12 AM

Good afternoon, Patrike. How to run nanominer ERGO + ZIL dual mining? Thank.

Hello. This is not yet supported via Awesome Miner.

Commie

full member

Activity: 621

Merit: 108

I have AM running on Ubuntu server 18.04. A couple days ago I reinstalled the system and since then miner freezes 1-3 minutes after it starts mining, also freezing keyboard and mouse (??). First hashrate stops showing, then temperature, if I stop it it won't start again with an error, logs show nothing useful. Reinstalling AM remote agent helps to restart the miner but then the story repeats. Have anyone else experienced this? I've remover all other software leaving raw OF and AM, increased the swap file size to 50gb, nothing helps.

NetWhiz

newbie

Activity: 49

Merit: 0

I have AM on 7 rigs. Everything runs fine. However, in the past few days one of the rigs stopped showing data. It is controlled and starts/stops the miners just fine. The console displays in AM as well. It is just the listing for the miner says the interface is offline and I can not get it to show correctly. I have uninstalled and reinstalled to no avail as well. Again, the console tab shows the remote command prompt correctly. It worked fine until a few days ago before the last update. Any ideas as to what else I can try?

Thank you.

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 56. (Read 703113 times)