[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 60.

JFoxOne

member

Activity: 640

Merit: 56

minerstat

Quote from: Pe_Da on February 17, 2021, 12:54:45 PM

Hi,

is it able to include the HiveOn ETH Pool to the "User defined online services" via API like Nicehash ?
I mean for switchting with his own profitability not the common ETH profit, Minerstat for example can do that.

Thank you!

We can do it for sure, but also Awesome Miner could do it as we offer free and easy to use API: https://api.minerstat.com/docs-coins

Pe_Da

jr. member

Activity: 58

Merit: 5

Hi,

is it able to include the HiveOn ETH Pool to the "User defined online services" via API like Nicehash ?
I mean for switchting with his own profitability not the common ETH profit, Minerstat for example can do that.

Thank you!

joseph32

member

Activity: 418

Merit: 21

Hi Patrik,

Nicehash released a new Quickminer. Dunno if it is different from Excavator or exactly the same. Can you please look over it and check, if AM (can) support it?

https://www.nicehash.com/blog/post/introducing-nicehash-quickminer?lang=en
https://github.com/nicehash/NiceHashQuickMiner/releases

And another question. Is it possible to add a rule to check the GPU load? With a settings of equals, greater than..., less than..., not equals, all of these stuff. But also with a trigger of immediately and when conditions are met for (s).

Would be great

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Matce on February 16, 2021, 12:33:19 AM

2 question guys:

- Will there be support for NTBC soon (wallet monitoring / coin support in general) ... trying API http://explorer.notebc.io/address/[address], but no success

- I'm trying to monitor LCC wallet, but no success. Can anyone help? Using API: https://lcc.tokenview.com/en/[address]/

thanks

Thanks for you questions

1) I couldn't find any block explorer with an API for this coin

2) For Litecoin, isn't the predefined API URL working for you?
https://chainz.cryptoid.info/ltc/api.dws

Matce

jr. member

Activity: 38

Merit: 1

2 question guys:

- Will there be support for NTBC soon (wallet monitoring / coin support in general) ... trying API http://explorer.notebc.io/address/[address], but no success

- I'm trying to monitor LCC wallet, but no success. Can anyone help? Using API: https://lcc.tokenview.com/en/[address]/

thanks

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: forato on February 13, 2021, 09:58:01 AM

Hi Patrik, how are you?

What do you think about this implementation:

- Like we can do on HIVEOS, run 2 instance miners at the same time:

As you can see on this example, on GPU 0 (4g) i Run lol miner
On GPU 1 (8g) i run PM.

I know that I can make to instances on AM, adding the same miner 2 times and selecting the GPUs that i want to run on each miner. But this is a workaround and there are 2 issues on this way:

1) it consumes license
2) sometimes it just don't work on both miners, or get lost chosing the GPU's

On HiveOS it just works...

Does it make sense to you? Can we have this feature on AM?

Hi,

Thanks for the feedback.

1) With the license subscription concept we introduced a year ago you can use multiple miners on the same host without consuming more than a single license. For the older licenses (one-time purchase) it's a correct observation that one mining instance consumes one license.

2) Please let me know the mining software where Awesome Miner doesn't select the correct GPU. Is it lolMiner as in your example? It's of course intended to be working but there can be a certain GPU combination or condition where it isn't working as expected. I will of course investigate and correct.

forato

full member

Activity: 237

Merit: 100

Hi Patrik, how are you?

What do you think about this implementation:

- Like we can do on HIVEOS, run 2 instance miners at the same time:

As you can see on this example, on GPU 0 (4g) i Run lol miner
On GPU 1 (8g) i run PM.

I know that I can make to instances on AM, adding the same miner 2 times and selecting the GPUs that i want to run on each miner. But this is a workaround and there are 2 issues on this way:

1) it consumes license
2) sometimes it just don't work on both miners, or get lost chosing the GPU's

On HiveOS it just works...

Does it make sense to you? Can we have this feature on AM?

joseph32

member

Activity: 418

Merit: 21

Quote from: Wingsbtc on February 12, 2021, 11:04:00 AM

This miner is still functioning? ...

Mate, you are in the wrong thread! This is not a miner. Please edit or delete your post.

Wingsbtc

member

Activity: 210

Merit: 12

This miner is still functioning? There was a time I download this miner on my PC and the file was infected with a nasty malware or trojan, I had to reinstall windows OS to get rid of the malware or whatever that was, I hope things are different right now?

joseph32

member

Activity: 418

Merit: 21

Quote from: patrike on February 11, 2021, 11:25:02 AM

Quote from: joseph32 on February 09, 2021, 11:02:53 PM

Hi Patrik,

I just thought to connect another AM into my network, just to check the running instances/rigs and maybe create some additional rules to monitor the main PC/AM. But that doesnt seems to work like expected.

But I think this can be a great idea for many people. Is it somehow possible for you to create this solution? Running multiple instances of AM just to additionally monitor the rigs? There is no need for profit switching or something like that, just show all the rigs inside AM like in the main AM. But the rules system should work too.

For External Miners it's possible to have multiple instances of Awesome Miner running, but not for Managed Miners. The Managed Miners are currently referencing many other objects like pools, clocking profiles and so on and these are not in sync between multiple instances. Having a view-only mode for monitoring should be possible to support in the future.

Such a view only mode would be perfect. Awesome

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 8.2.6

CPU mining
- Display temperature for Ryzen 5000 series CPU
Features
- Introducing a concept of a secondary coin for pools, intended for merge-mining scenarios, where the pool revenue will be based on the income from two different coins
- Per GPU power usage display in the web interface
Integration
- Binance.US supported for Exchange Balance
- Updated Mining Pool Hub pool list
Mining software
- SrbMiner 0.6.6
- Nanominer 3.2.1
- T-Rex 0.19.10, including improved GPU mapping based on new PciBusID property
Corrections
- Correction to display of PciBusID when using the manual GPU mapping feature

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: joseph32 on February 09, 2021, 11:02:53 PM

Hi Patrik,

I just thought to connect another AM into my network, just to check the running instances/rigs and maybe create some additional rules to monitor the main PC/AM. But that doesnt seems to work like expected.

But I think this can be a great idea for many people. Is it somehow possible for you to create this solution? Running multiple instances of AM just to additionally monitor the rigs? There is no need for profit switching or something like that, just show all the rigs inside AM like in the main AM. But the rules system should work too.

For External Miners it's possible to have multiple instances of Awesome Miner running, but not for Managed Miners. The Managed Miners are currently referencing many other objects like pools, clocking profiles and so on and these are not in sync between multiple instances. Having a view-only mode for monitoring should be possible to support in the future.

joseph32

member

Activity: 418

Merit: 21

Hi Patrik,

I just thought to connect another AM into my network, just to check the running instances/rigs and maybe create some additional rules to monitor the main PC/AM. But that doesnt seems to work like expected.

But I think this can be a great idea for many people. Is it somehow possible for you to create this solution? Running multiple instances of AM just to additionally monitor the rigs? There is no need for profit switching or something like that, just show all the rigs inside AM like in the main AM. But the rules system should work too.

darthmajere

newbie

Activity: 6

Merit: 0

Quote from: patrike on February 09, 2021, 03:28:59 AM

Quote from: darthmajere on February 08, 2021, 01:19:13 PM

Quote from: patrike on February 08, 2021, 09:20:55 AM

Quote from: darthmajere on February 05, 2021, 03:15:30 PM

Hi, yes i'm ok for the pagefiles, when team red start, i have 2 team red window open at the same time."https://imgur.com/VcyLUYL"

When i try other like phoenix i have no problem.

Thanks,

Quote from: patrike on February 05, 2021, 01:17:55 PM

Quote from: darthmajere on February 05, 2021, 09:14:22 AM

Hi, when i start "Device status marked as dead"

I have a Nvidia but is not selected.

Thanks for sharing the details. No additional error messages before that? I will try the combination of RTX 5700 with TeamRedMiner to see if there are any general problems and get back to you with an update.

The command line looks good in general.

Maybe you could verify the Virtual Memory size in Windows to make sure it's enough?
1) Open Control Panel and go to System
2) Select Advanced system settings
3) Click the Settings button in the Performance section
4) Select the Advanced tab
5) Click the Change button in the Virtual memory section
6) Define at least 20 GB virtual memory size

The screenshot didn't show any specific errors. If you only have a single AMD GPU, why are you running two TeamRedMiner instances? That will only create instability.

Absolutely not, when I change from phoenix to team red, 2 windows are launched.

It sounds very strange that you would have two instances of TeamRedMiner, as Awesome Miner will only launch one. Please make sure you don't have configured anything custom in the Properties of the Managed Miner, Command Line section.

Can you please send me your Awesome Miner log file (via "Contact Us" on www.awesomeminer.com)? You can access it via the toolbar Tools -> Log file. Thanks!

Yes it's done. i have remove all command line and i have 2 instances, phoenix or other miner i running good.

Thanks for you help.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: darthmajere on February 08, 2021, 01:19:13 PM

Quote from: patrike on February 08, 2021, 09:20:55 AM

Quote from: darthmajere on February 05, 2021, 03:15:30 PM

Hi, yes i'm ok for the pagefiles, when team red start, i have 2 team red window open at the same time."https://imgur.com/VcyLUYL"

When i try other like phoenix i have no problem.

Thanks,

Quote from: patrike on February 05, 2021, 01:17:55 PM

Quote from: darthmajere on February 05, 2021, 09:14:22 AM

Hi, when i start "Device status marked as dead"

I have a Nvidia but is not selected.

Thanks for sharing the details. No additional error messages before that? I will try the combination of RTX 5700 with TeamRedMiner to see if there are any general problems and get back to you with an update.

The command line looks good in general.

Maybe you could verify the Virtual Memory size in Windows to make sure it's enough?
1) Open Control Panel and go to System
2) Select Advanced system settings
3) Click the Settings button in the Performance section
4) Select the Advanced tab
5) Click the Change button in the Virtual memory section
6) Define at least 20 GB virtual memory size

The screenshot didn't show any specific errors. If you only have a single AMD GPU, why are you running two TeamRedMiner instances? That will only create instability.

Absolutely not, when I change from phoenix to team red, 2 windows are launched.

It sounds very strange that you would have two instances of TeamRedMiner, as Awesome Miner will only launch one. Please make sure you don't have configured anything custom in the Properties of the Managed Miner, Command Line section.

Can you please send me your Awesome Miner log file (via "Contact Us" on www.awesomeminer.com)? You can access it via the toolbar Tools -> Log file. Thanks!

darthmajere

newbie

Activity: 6

Merit: 0

Quote from: patrike on February 08, 2021, 09:20:55 AM

Quote from: darthmajere on February 05, 2021, 03:15:30 PM

Hi, yes i'm ok for the pagefiles, when team red start, i have 2 team red window open at the same time."https://imgur.com/VcyLUYL"

When i try other like phoenix i have no problem.

Thanks,

Quote from: patrike on February 05, 2021, 01:17:55 PM

Quote from: darthmajere on February 05, 2021, 09:14:22 AM

Hi, when i start "Device status marked as dead"

I have a Nvidia but is not selected.

Thanks for sharing the details. No additional error messages before that? I will try the combination of RTX 5700 with TeamRedMiner to see if there are any general problems and get back to you with an update.

The command line looks good in general.

Maybe you could verify the Virtual Memory size in Windows to make sure it's enough?
1) Open Control Panel and go to System
2) Select Advanced system settings
3) Click the Settings button in the Performance section
4) Select the Advanced tab
5) Click the Change button in the Virtual memory section
6) Define at least 20 GB virtual memory size

The screenshot didn't show any specific errors. If you only have a single AMD GPU, why are you running two TeamRedMiner instances? That will only create instability.

Absolutely not, when I change from phoenix to team red, 2 windows are launched.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: sxemini on February 05, 2021, 04:53:33 PM

Hi patrike,

maybe you understand the problem better with a pic:

I must reorganize my gpu list (map to system ...) that it fit to my hashrate in gpu tab, but after reorganization, pci bus id don´t fit to the hashrate. If i don´t map, bus id is right, but it the order of cards is wrong and don´t fit to the hashrate.

If i change the order, all information have to move also or i am wrong? Sorry but for me it is a failure if you don´t move the pci bus id. Than the pci bus id must delete in gpu tab, because it is wrong.

Your observation is correct about PciBusID - it isn't displayed correctly in the GPU tab. I will correct that. It should be displayed, but it should be moved propertly.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: darthmajere on February 05, 2021, 03:15:30 PM

Hi, yes i'm ok for the pagefiles, when team red start, i have 2 team red window open at the same time."https://imgur.com/VcyLUYL"

When i try other like phoenix i have no problem.

Thanks,

Quote from: patrike on February 05, 2021, 01:17:55 PM

Quote from: darthmajere on February 05, 2021, 09:14:22 AM

Hi, when i start "Device status marked as dead"

I have a Nvidia but is not selected.

Thanks for sharing the details. No additional error messages before that? I will try the combination of RTX 5700 with TeamRedMiner to see if there are any general problems and get back to you with an update.

The command line looks good in general.

Maybe you could verify the Virtual Memory size in Windows to make sure it's enough?
1) Open Control Panel and go to System
2) Select Advanced system settings
3) Click the Settings button in the Performance section
4) Select the Advanced tab
5) Click the Change button in the Virtual memory section
6) Define at least 20 GB virtual memory size

The screenshot didn't show any specific errors. If you only have a single AMD GPU, why are you running two TeamRedMiner instances? That will only create instability.

sxemini

member

Activity: 1558

Merit: 69

Hi patrike,

maybe you understand the problem better with a pic:

I must reorganize my gpu list (map to system ...) that it fit to my hashrate in gpu tab, but after reorganization, pci bus id don´t fit to the hashrate. If i don´t map, bus id is right, but it the order of cards is wrong and don´t fit to the hashrate.

If i change the order, all information have to move also or i am wrong? Sorry but for me it is a failure if you don´t move the pci bus id. Than the pci bus id must delete in gpu tab, because it is wrong.

darthmajere

newbie

Activity: 6

Merit: 0

Hi, yes i'm ok for the pagefiles, when team red start, i have 2 team red window open at the same time."https://imgur.com/VcyLUYL"

When i try other like phoenix i have no problem.

Thanks,

Quote from: patrike on February 05, 2021, 01:17:55 PM

Quote from: darthmajere on February 05, 2021, 09:14:22 AM

Hi, when i start "Device status marked as dead"

I have a Nvidia but is not selected.

Thanks for sharing the details. No additional error messages before that? I will try the combination of RTX 5700 with TeamRedMiner to see if there are any general problems and get back to you with an update.

The command line looks good in general.

Maybe you could verify the Virtual Memory size in Windows to make sure it's enough?
1) Open Control Panel and go to System
2) Select Advanced system settings
3) Click the Settings button in the Performance section
4) Select the Advanced tab
5) Click the Change button in the Virtual memory section
6) Define at least 20 GB virtual memory size

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 60. (Read 703512 times)