[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 67.

sxemini

member

Activity: 1558

Merit: 69

Quote from: forato on November 30, 2020, 03:03:33 PM

overclock options:

I need to setup some clocks to 2050 or 2060:

AM overclock tool only goes to 2000 at memory:

Can you change this to acept higher values?

AM is limited by BIOS of your GPU. So you must change your BIOS first and set a higher mem clock limit.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: forato on November 30, 2020, 03:03:33 PM

overclock options:

I need to setup some clocks to 2050 or 2060:

AM overclock tool only goes to 2000 at memory:

Can you change this to acept higher values?

I assume this is for AMD on Linux. I will increase the limits in Awesome Miner but please note that depending on the GPU there can be limits elsewhere.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: geck on November 30, 2020, 10:58:47 AM

Quote from: patrike on November 30, 2020, 10:49:30 AM

Quote from: geck on November 30, 2020, 09:42:57 AM

Hi,

Is it possible to get awesomeminer to display gpu stats when connected to lolminer/phoenixminer using external miner function?
Awesomeminer displays hashrate but nothing else.

When using the External Miner concept, Awesome Miner can only display the mining details provided by the mining software. For GPU it can typically include the temperature, but not all details you get if the mining is fully controlled by Awesome Miner or Remote Agent.

Hi Patrike,

Lolminer for example provides most of the important gpu stats in json format:
"Index": 0,
"Name": "AMD Radeon RX 5600 XT",
"Performance": 43.13,
"Consumption (W)": 72.001000000000005,
"Fan Speed (%)": 51,
"Temp (deg C)": 57,
"Mem Temp (deg C)": 88,
"Session_Accepted": 52,
"Session_Submitted": 52,
"Session_HWErr": 0,
"Session_BestShare": 930349369113,
"PCIE_Address": "3:0"

awesomeminer already display these stats if using the remote agent. Could we get them included when used as an external miner too?

Awesome Miner was already reading a number of these properties for Lolminer, but was missing a few important like fan speed, temperature and power usage. They may have been added to the Lolminer API at some point. I will improve this in the next release. Thanks for your feedback.

For Phoenix Miner via an External Miner I can already see the fan speed, hashrate and temperature reported for each GPU. Power usage isn't provided by the API.

forato

full member

Activity: 237

Merit: 100

overclock options:

I need to setup some clocks to 2050 or 2060:

AM overclock tool only goes to 2000 at memory:

Can you change this to acept higher values?

geck

member

Activity: 145

Merit: 10

Quote from: patrike on November 30, 2020, 10:49:30 AM

Quote from: geck on November 30, 2020, 09:42:57 AM

Hi,

Is it possible to get awesomeminer to display gpu stats when connected to lolminer/phoenixminer using external miner function?
Awesomeminer displays hashrate but nothing else.

When using the External Miner concept, Awesome Miner can only display the mining details provided by the mining software. For GPU it can typically include the temperature, but not all details you get if the mining is fully controlled by Awesome Miner or Remote Agent.

Hi Patrike,

Lolminer for example provides most of the important gpu stats in json format:
"Index": 0,
"Name": "AMD Radeon RX 5600 XT",
"Performance": 43.13,
"Consumption (W)": 72.001000000000005,
"Fan Speed (%)": 51,
"Temp (deg C)": 57,
"Mem Temp (deg C)": 88,
"Session_Accepted": 52,
"Session_Submitted": 52,
"Session_HWErr": 0,
"Session_BestShare": 930349369113,
"PCIE_Address": "3:0"

awesomeminer already display these stats if using the remote agent. Could we get them included when used as an external miner too?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: geck on November 30, 2020, 09:42:57 AM

Hi,

Is it possible to get awesomeminer to display gpu stats when connected to lolminer/phoenixminer using external miner function?
Awesomeminer displays hashrate but nothing else.

When using the External Miner concept, Awesome Miner can only display the mining details provided by the mining software. For GPU it can typically include the temperature, but not all details you get if the mining is fully controlled by Awesome Miner or Remote Agent.

geck

member

Activity: 145

Merit: 10

Hi,

Is it possible to get awesomeminer to display gpu stats when connected to lolminer/phoenixminer using external miner function?
Awesomeminer displays hashrate but nothing else.

Pe_Da

jr. member

Activity: 58

Merit: 5

Quote from: patrike on November 30, 2020, 03:34:40 AM

Quote from: joseph32 on November 29, 2020, 10:45:24 PM

Quote from: Pe_Da on November 29, 2020, 04:51:49 PM

Great tool but why I don´t get calculated profit with ETCHash?

The hashrate is already set under settings ...

Thanks!

Its the calculation of EtcHash, which seems to be wrong right now.

I've updated the ETC calculation and pushed an update for it. Your Awesome Miner should automatically have it within an hour.

You can also force the update by clicking "Update mining software definitions". Even if there are no new software definitions, it will also force a refresh of the coin calculations.

Thanl you so much, it works now!

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: forato on November 29, 2020, 05:16:28 PM

Please, can you add a way to remote access linux rigs?

(Maybe integrating with putty?)

You can configure Awesome Miner to launch putty for the selected miner. Please go to the Options dialog, Rule section and define a new rule like below:

1) Description: Connect using PuTTY
2) Support manual activation via the toolbar: Yes (checked)
3) Action: Run executable
Executable: C:\YourPath\putty.exe
Parameters: [Host]

Now you will have an Action menu in the toolbar where you can select "Connect using PuTTY" and Awesome Miner will launch Putty for the selected miner.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: joseph32 on November 29, 2020, 10:45:24 PM

Quote from: Pe_Da on November 29, 2020, 04:51:49 PM

Great tool but why I don´t get calculated profit with ETCHash?

The hashrate is already set under settings ...

Thanks!

Its the calculation of EtcHash, which seems to be wrong right now.

I've updated the ETC calculation and pushed an update for it. Your Awesome Miner should automatically have it within an hour.

You can also force the update by clicking "Update mining software definitions". Even if there are no new software definitions, it will also force a refresh of the coin calculations.

joseph32

member

Activity: 418

Merit: 21

Quote from: Pe_Da on November 29, 2020, 04:51:49 PM

Great tool but why I don´t get calculated profit with ETCHash?

The hashrate is already set under settings ...

Thanks!

Its the calculation of EtcHash, which seems to be wrong right now.

forato

full member

Activity: 237

Merit: 100

Please, can you add a way to remote access linux rigs?

(Maybe integrating with putty?)

Pe_Da

jr. member

Activity: 58

Merit: 5

Great tool but why I don´t get calculated profit with ETCHash?

The hashrate is already set under settings ...

Thanks!

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: zloyneo on November 28, 2020, 12:02:19 PM

Where PhoenixMiner 5.3b ? ETC HARDFORK!!!

Please upgrade to Awesome Miner v8.1.10 as there had to be a change to the Phoenix Miner integration to fully support EtcHash.

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 8.1.10

Integration
- Nicehash Octopus pool added
Mining software
- PhoenixMiner 5.3b including EtcHash support for Ethereum Classic fork
- Nanominer 3.1.2
- Gminer 2.33
- XmRig 6.6.1
- SrbMiner Multi 0.5.7

zloyneo

newbie

Activity: 40

Merit: 0

Quote from: patrike on November 25, 2020, 07:15:53 AM

Awesome Miner version 8.1.9

ASIC mining
  - Operations to pause mining and resume mining supports Bitmain firmware for Antminer S15/T15 and S17/T17
  - Detection of Canaan Avalon 11-series miners and more exact detection of Avalon ASIC miners in general
  - Display firmware version for more ASIC models on the Summary tab for the selected miner
  - Improved hashrate display compatibility with custom Antminer Z11 firmware by FuddWare
Mining software
  - Lolminer 1.16
  - XmRig 6.6
  - Nanominer 3.1.1
  - T-Rex miner 0.18.11
  - NbMiner 33.8
  - SrbMiner 0.5.6
  - TeamRedMiner 0.7.18
  - PhoenixMiner 5.2e
Corrections
  - Correction to setting Power mode (Work mode) for Antminer S17+
  - Correction to license allocation for External Miners being changed to Disabled state

Where PhoenixMiner 5.3b ? ETC HARDFORK!!!

narousberg

legendary

Activity: 1754

Merit: 1007

Patrike, i found small bug
If i add a pool group to profit switching as additional pools and later i will change pools in this group in this field for additional pools, the changes will not be saved.
Regards

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 8.1.9

ASIC mining
  - Operations to pause mining and resume mining supports Bitmain firmware for Antminer S15/T15 and S17/T17
  - Detection of Canaan Avalon 11-series miners and more exact detection of Avalon ASIC miners in general
  - Display firmware version for more ASIC models on the Summary tab for the selected miner
  - Improved hashrate display compatibility with custom Antminer Z11 firmware by FuddWare
Mining software
  - Lolminer 1.16
  - XmRig 6.6
  - Nanominer 3.1.1
  - T-Rex miner 0.18.11
  - NbMiner 33.8
  - SrbMiner 0.5.6
  - TeamRedMiner 0.7.18
  - PhoenixMiner 5.2e
Corrections
  - Correction to setting Power mode (Work mode) for Antminer S17+
  - Correction to license allocation for External Miners being changed to Disabled state

sxemini

member

Activity: 1558

Merit: 69

Quote from: fgm on November 24, 2020, 11:19:04 AM

Not only Phoenix miner, also team red miner with xhv.

You will mine zilliqa? I made a description for Awesomeminer. Find it in zilswitcher thread.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: fgm on November 24, 2020, 11:19:04 AM

Not only Phoenix miner, also team red miner with xhv.

Can you please send me the Remote Agent log file (you can access it via the Awesome Miner toolbar Tools -> Log File -> Remote Agent).
Contact form: https://www.awesomeminer.com/contact

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 67. (Read 703512 times)