Baikal Giant X10 - page 16. | Bitcointalksearch.org

cryptonitro

full member

Activity: 348

Merit: 119

Quote from: Overlast on May 08, 2018, 01:01:15 PM

I have only one and already tried re writing on different sd cards. No luck. Yellow and blue leds keep flashing simultaneously and red led burning steady.
Checked network and cables; all ok.
Both leds on PI Zero (next to ethernet cable) both on.

I just contacted Baikal. Hopefully they can help.

Damm sorry to hear that, i can imagine the frustration you can have.

One of mine start to get crazy , high hashrate (like 100Ghs) but unfortunatly shares rejected Cheesy

and unreliable some minutes after restart.

did you update the last software with nist5 / x11gost ?

Overlast

newbie

Activity: 41

Merit: 0

Quote from: cryptonitro on May 08, 2018, 12:45:29 PM

Quote from: Overlast on May 08, 2018, 04:10:59 AM

Guys,
Overnight the blue leds started blinking. Usually no problem because after a restart/reboot all works fine again.
But this time they keep blinking even after several reboots. And the device is not reachable through the webinterface.
Someone, any suggestions what to do?
Could the sd card all of a sudden be corrupted?

Hi Overlast , SD is the original one ? when you shut it off wait at list 1 minute to test.

Do you have an other x10 ? if yes

try to invert the orange pi , let sd cards in place dont invert it.
see if the problem is now on the other miner
then just invert the SD card and check

If you have only one x10 , i suggest to rewrite the software on sd card.
check instruction here

Quote

if problem persist contact Baikal , you ll have probably orange pi in trouble

I have only one and already tried re writing on different sd cards. No luck. Yellow and blue leds keep flashing simultaneously and red led burning steady.
Checked network and cables; all ok.
Both leds on PI Zero (next to ethernet cable) both on.

I just contacted Baikal. Hopefully they can help.

cryptonitro

full member

Activity: 348

Merit: 119

Quote from: Overlast on May 08, 2018, 04:10:59 AM

Guys,
Overnight the blue leds started blinking. Usually no problem because after a restart/reboot all works fine again.
But this time they keep blinking even after several reboots. And the device is not reachable through the webinterface.
Someone, any suggestions what to do?
Could the sd card all of a sudden be corrupted?

Hi Overlast , SD is the original one ? when you shut it off wait at list 1 minute to test.

Do you have an other x10 ? if yes

try to invert the orange pi , let sd cards in place dont invert it.
see if the problem is now on the other miner
then just invert the SD card and check

If you have only one x10 , i suggest to rewrite the software on sd card.
check instruction here

Quote

if problem persist contact Baikal , you ll have probably orange pi in trouble

Overlast

newbie

Activity: 41

Merit: 0

Guys,
Overnight the blue leds started blinking. Usually no problem because after a restart/reboot all works fine again.
But this time they keep blinking even after several reboots. And the device is not reachable through the webinterface.
Someone, any suggestions what to do?
Could the sd card all of a sudden be corrupted?

yrk1957

member

Activity: 531

Merit: 29

Any tricks to get this to work with nicehash?

When I add nicehash pools, after deleting everything else, and save, the mining process stops and never restarts.

After this the mining process does not start even if I change pools to zpool (which works). I have to un-plug and re-start it to get zpool working.

henrylitee

newbie

Activity: 54

Merit: 0

Quote from: Gongolo on May 04, 2018, 01:26:41 PM

Quote from: henrylitee on May 04, 2018, 01:01:36 PM

hi,?

im minning with baikal x10 in nicehash but i cannot get the baikal changes automatically to the most profitable algo, any idea ?

Add "enable-nicehashsma" miner option and set it to "true".

thanks is workinggggg Grin

Gongolo

full member

Activity: 374

Merit: 101

Quote from: henrylitee on May 04, 2018, 01:01:36 PM

hi,?

im minning with baikal x10 in nicehash but i cannot get the baikal changes automatically to the most profitable algo, any idea ?

Add "enable-nicehashsma" miner option and set it to "true".

henrylitee

newbie

Activity: 54

Merit: 0

hi,?

im minning with baikal x10 in nicehash but i cannot get the baikal changes automatically to the most profitable algo, any idea ?

Marvell2

full member

Activity: 1148

Merit: 132

Quote from: elmond on May 02, 2018, 11:45:32 PM

Quote from: Marvell2 on May 02, 2018, 04:59:18 AM

Quote from: GunsN on April 25, 2018, 02:00:01 PM

Quote from: Sylint on April 25, 2018, 11:32:41 AM

Where is the best place to buy this?

from official website.
baikalminer.com

not any fan will work the baikal board has a smaller thinner connector than normal 4 pin fans
i went to microcenter and non of thier 6000 rmp fans matched the biakal fan

just cut the wire and coonect

cant belive i did not think of this , just did that now

the fan from the D3 seems to work fine , now it seems there is is an issue with both my x10s tho they both say miner down i hope its the pool

on starpool with both

elmond

newbie

Activity: 49

Merit: 0

Quote from: Marvell2 on May 02, 2018, 04:59:18 AM

Quote from: GunsN on April 25, 2018, 02:00:01 PM

Quote from: Sylint on April 25, 2018, 11:32:41 AM

Where is the best place to buy this?

from official website.
baikalminer.com

not any fan will work the baikal board has a smaller thinner connector than normal 4 pin fans
i went to microcenter and non of thier 6000 rmp fans matched the biakal fan

just cut the wire and coonect

xaco147

newbie

Activity: 29

Merit: 0

Quote from: Gongolo on May 02, 2018, 04:09:21 AM

Quote from: xaco147 on May 02, 2018, 01:41:03 AM

Can anyone share his earnings on XVGMG on suprnova in the last days? I am very happy with the pool and always had little bit higher earnings than what whattomine says, but in the last days I am earning around 25 coins less per day, per machine. I have around 210-215 coins per day per machine. Thanks in advance.

My current last day stats @suprnova: 220 XVG.

Ok, thank you

Marvell2

full member

Activity: 1148

Merit: 132

Quote from: GunsN on April 25, 2018, 02:00:01 PM

Quote from: Sylint on April 25, 2018, 11:32:41 AM

Where is the best place to buy this?

from official website.
baikalminer.com

not any fan will work the baikal board has a smaller thinner connector than normal 4 pin fans
i went to microcenter and non of thier 6000 rmp fans matched the biakal fan

Gongolo

full member

Activity: 374

Merit: 101

Quote from: xaco147 on May 02, 2018, 01:41:03 AM

Can anyone share his earnings on XVGMG on suprnova in the last days? I am very happy with the pool and always had little bit higher earnings than what whattomine says, but in the last days I am earning around 25 coins less per day, per machine. I have around 210-215 coins per day per machine. Thanks in advance.

My current last day stats @suprnova: 220 XVG.

xaco147

newbie

Activity: 29

Merit: 0

Quote from: MiCoSa on May 02, 2018, 02:35:03 AM

Quote from: xaco147 on May 02, 2018, 01:41:03 AM

Can anyone share his earnings on XVGMG on suprnova in the last days? I am very happy with the pool and always had little bit higher earnings than what whattomine says, but in the last days I am earning around 25 coins less per day, per machine. I have around 210-215 coins per day per machine. Thanks in advance.

Verge is rising. This means more miners mine werge, this means less verge for every miner...

I am aware of that. But it rose yesterday and today. I am talking about previous days. The interesting thing was the following: whattomine says I will mine 240 XVG/day/machine on difficulty 1.35M (approx.) and on suprnova pool the difficulty is like 1.1M (approx.) and I still earn around 210-215. When the XVG hack attack happen I was following the owner of the pool and he looked very honest person, so I don't think some hidden taxes are the reason for my lower earnings. Still would like to hear somebody's earnings, if he/she is willing to share them of course.

MiCoSa

jr. member

Activity: 201

Merit: 1

Quote from: xaco147 on May 02, 2018, 01:41:03 AM

Can anyone share his earnings on XVGMG on suprnova in the last days? I am very happy with the pool and always had little bit higher earnings than what whattomine says, but in the last days I am earning around 25 coins less per day, per machine. I have around 210-215 coins per day per machine. Thanks in advance.

Verge is rising. This means more miners mine werge, this means less verge for every miner...

xaco147

newbie

Activity: 29

Merit: 0

Can anyone share his earnings on XVGMG on suprnova in the last days? I am very happy with the pool and always had little bit higher earnings than what whattomine says, but in the last days I am earning around 25 coins less per day, per machine. I have around 210-215 coins per day per machine. Thanks in advance.

Marvell2

full member

Activity: 1148

Merit: 132

fan on my x10 dies , i tried to pull the fan from a d3 or s7 but it seems the fan power on the
x10 is a smallee 4 pin than standard 4 pins. Any ideas?

Shorty2520

member

Activity: 165

Merit: 11

Quote from: NlaakStudios on April 30, 2018, 08:49:33 AM

Quote from: Sylint on April 25, 2018, 11:32:41 AM

Where is the best place to buy this?

Most places are charging way too much.

If anyone is interested I have 3 Baikal X10's left to sell. All are Upgraded with all algorithm's and come with the power supply. Selling as a set of 3 for ~$7,500usd. Payment via Ethereum (11.000) only.

Why? The company is moving to the Cayman Islands and electricity there is too high for mining to be profitable, period.

PM me if interested.

Ok, answering some of the questions here:
1) No, not a scam - We are underbidding other sources just to move them quicker. Nlaak Studios LLC is licensed in the state of Texas. Look us up.
2) Yes, We will pay the shipping to you. Contents will be in a Single Box with all 3 units and their power supplies & cables. Throw in another $50 and you'll get the router and ethernet cables as well.
3) Sorry, no other forms of payment will be accepted other than Ethereum.

Sounds pretty as a scam and why would anyone go on this risk to save 199$ per Unit?

Only ETH .. put them up on eBay and they will be sold (if you got them).

NlaakStudios

newbie

Activity: 74

Merit: 0

Quote from: Sylint on April 25, 2018, 11:32:41 AM

Where is the best place to buy this?

Most places are charging way too much.

If anyone is interested I have 3 Baikal X10's left to sell. All are Upgraded with all algorithm's and come with the power supply. Selling as a set of 3 for ~$7,500usd. Payment via Ethereum (11.000) only.

Why? The company is moving to the Cayman Islands and electricity there is too high for mining to be profitable, period.

PM me if interested.

Ok, answering some of the questions here:
1) No, not a scam - We are underbidding other sources just to move them quicker. Nlaak Studios LLC is licensed in the state of Texas. Look us up.
2) Yes, We will pay the shipping to you. Contents will be in a Single Box with all 3 units and their power supplies & cables. Throw in another $50 and you'll get the router and ethernet cables as well.
3) Sorry, no other forms of payment will be accepted other than Ethereum.

leowonderful

legendary

Activity: 1624

Merit: 1130

Bitcoin FTW!

Quote from: Shorty2520 on April 28, 2018, 06:21:45 PM

Quote from: Sylint on April 25, 2018, 11:32:41 AM

Where is the best place to buy this?

You can buy it for less than 10 bucks on amazon.

Search for 6000 pwm or similar.

Anyone tried another fan? I wanted to replace with high quality, but ended up reading threads from Antminer there is no chance for noise reduction.
These fans get above 200 cfm and all in this class are at 60 dB.

Anyone tried? Saw industrial 3000pwm from noctua but just half of the power with the cfm compared.

My are running at 70% and are loud as hell. I want to keep them below 30 degrees Celsius.

PWM is the technique that allows fans to have a variable fan speed. The correct word you're looking for is RPM, which measures fan revolutions per minute.

It really depends what algo you're going to use the X10 with. Quark and Qubit, which are the two most profitable algos to mine with the X10 right now, use just around or below 400W. You should be fine with the 3000RPM Noctuas with consumption that low; the reason why it doesn't work with Antminers is because they require high static pressure and CFM to operate as there's a lot of heat that needs to be dissipated through the heatsinks in the miner, and everything is packed very tightly together. A replacement should make the machine much quieter and run just as well (but always monitor temperatures after replacing a fan until temps stabilize to a safe temperature to ensure the setup is stable).

Topic: Baikal Giant X10 - page 16. (Read 132901 times)