Topic: [BBR] Boolberry GPU Miner Discussion - AMD & Nvidia - OpenCL & CUDA - page 3. (Read 82997 times)

So with minerd you can't set 2 different intensities for 2 different cards? Am I correct?
ie  -d 0,1  -i 14,19  should give intensity 14 to device 0 and intensity 19 to device 1... but it doesn't?

what is hash rate for wild keccak on Gtx 1060 3gb Gpu...

http://bbr.mbkpool.info/#
Why is only half to 10% of my hash showing at the pool? I have my bat file done correctly too.

y мeня вoпpoc пoчeмy нa зeлeнкe y мeня пoкaзывaeт эфeктивнocть дo 50%, a эфeктивнocть  aмд 100% пpoблeм нeт.
Зapaнee cпacибo

you can update try this
if you trust me

MBK,

mbkpool.info is not paying out (last payout @ 11/5/2017 11:29:29am) - I've had a pending balance for days.  Pool may need maintenance.

Thank you.

Hello Everyone,

I am trying to mine on simpleminingOS with the following on claymore-eth-v9.5 but it does not work.


can someone help me please? Thank you

Can some body help me?
Pool poolto.be is a scam project?
From 03/06/2017 - 228 BBR in Pending Balance
I wrote to [email protected] and there is no answer about...
http://cdn1.savepice.ru/uploads/2017/6/7/6116a32a31f0f554e473b8a5c878d716-full.jpg

I apologize in advance for the long post.

Short version for the lazy:

At stock clocks, the RX 470 and RX 480 both get hash rates close to 1450 kh/s when mining Boolberry. (If they have slighly OC'd 2000 mhz memory.) You might be able to squeeze out another 300 kh/s with a modded BIOS, however.

Long version:

The RX 480, even with a modded BIOS, does not seem to perform better than an RX 470. According to http://1stminingrig.com/how-to-mine-boolberry-bbr-with-amd-nvidia-gpu/, an RX 470 can do 1450 kh/s easily. Even with the significantly higher core clock speed (1338mhz), my factory OC'd XFX RX 480 pulls almost exactly 1450kh/s at stock speeds. They both pull 1450kh/s at their stock speeds and they both have slightly higher memory clocks of 2000mhz. Only overclocking the memory seems to have any real effect. That probably isn't just a coincidence. It looks like memory is a more serious bottleneck for Boolberry mining than it is for other coins.

The only way to get any more performance is to use a modified BIOS like mine. My modded BIOS with faster memory timings and a 2150mhz memory clock speed gives me another 300 kh/s or so on my RX 480. I wouldn't be surprised if an RX 470 could get very similar performance to my card if you used the same memory timings and clocks. Just don't blame me if you try this and your RX 470 turns into a paperweight!  

Here's my modded bios: https://www.dropbox.com/s/l8mvq99rc17g7ne/xfx-rx-480-8gb-boolberry.rom?dl=0 Just keep in mind that it's made for the specific model of the card I'm using (RX-480P8DBA6). Flashing it on another one could be... bad. I'm sure you could use the Polaris BIOS editor to copy the memory timings, clocks, and voltages from this BIOS over to one from another model of the RX 480 if you wanted. It's more or less standard procedure for a modified RX 480 BIOS.

Here are some screenshots of the miner running on my RX 480:

Stock bios: 1450 kh/s
https://i.imgur.com/OYuxzRr.png

Modded bios: 1750 kh/s
https://i.imgur.com/gbo87TL.png

Hi,

I get an error when trying to mine.
What am I doing wrong?
GPU is a nvidia geforce 720M

CL_INVALID_COMMAND_QUEUE

regards,
Enricosofie

Guys, any idea about R9 290 hash rate ?
Thanks

Are you guys still using OpenCL for AMD GPU? Do we have a better miner?

Hi

Any idea what I set the --mining-thread(n) count to solo mining w/ a RX470?

Thanks

New BBR pool
Pool supports payment_id, so you can mine directly to an exchange.

This miner is very unstable, drops connection to pool every time when generate an error (!booo).
Also missing information considering this miner, example, which drivers are recommended to this old release, and performance depending drivers-gpu chips.
Is there any plan to make a new release?

hello all,

I'm trying to setup the wallet daemon for the pool addresses for BBR, and i'm having problems find the  "Coin daemon(s) (find the coin's repo and build latest version from source)"

For zec and zcl, it's easy i can find the coin daemon, gen the addresses for the pool and away i go....

Is there a different way to do this for BBR?

sorry for the noob question, but i've got other pools running fine, i'm just struggling a little with the BBR coin daemon....

any advice would be great,

thank you

Qq Group 218518748
bbr pool !

Non polo address.
Now is OK, showing pending balance 

Which wallet address are you using? Polo or non polo. And to me it generally it takes around 1-2 hrs to get confirmations needed to show that balance in the wallet. So hang tight

Be CAREFUL  with this pool http://bbr.crypto-coins.club/ Probably SCAM .email for support is not valid, also no payouts, altho I have many coins in balance

It works