Topic: BFGMiner 5.5.0: CPU/GPU/FPGA/ASIC mining software, GBT+Stratum, RPC, Linux/Win64 - page 6. (Read 834570 times)

Does the stratum-proxy only work solo against a wallet, or does it act as a pass-through?

If pass-through, can it be run multi-port? Would the command look something like this?

As I understand it, the current scrypt maintainer has  his own mining hardware, so probably isn't interested in supporting competitors.
So you'd need to find someone willing to write and maintain a new driver for it, and probably Innosilicon would need to provide at least specs of some sort (and ideally sample hardware).

nwoolls (who used to maintain BFGMiner's scrypt drivers) has been MIA for a year or so, but maybe if you PM him on the  forum, he might get an email and be interested?

Not sure this is the correct way to ask, but

any chance of getting support for Innosilicon devices with BFGMiner ?!
(A4 preferred  )

Kind regards...

Best miner ,which i can use in raspberry pi ?

Everything appears to be working fine.

The below log shows a new block being created every minute on the 35 second mark with the fees increasing, until the completed block 502417 arrives in the Core from a peer node at 20:10:12.
A new block is then created that very same second and I assume passed to BFGminer, with a much lower fee than the one created 37 seconds prior.
It seems that all the prior blocks being created, just in case they are needed, are trumped by this new block created just after a completed block arrives.
Why is it such a lower fee? I suspect because when the completed block arrived, the Bitcoin Core removed all the transactions used in that completed block from the Mem pool of available transactions. Pretty much making all prior blocks created for BFGminer invalid as some of those transactions may have been in this newly completed block.

It seems to me that you shouldn’t create a new block until after the current completed block has arrived and the Mem pool has been updated with available transactions.


2018-01-03 20:07:35 CreateNewBlock(): block weight: 3992232 txs: 2203 fees: 378086720 sigops 21168
2018-01-03 20:08:35 CreateNewBlock(): block weight: 3992656 txs: 2419 fees: 410225647 sigops 24184
2018-01-03 20:09:35 CreateNewBlock(): block weight: 3992140 txs: 2480 fees: 471696205 sigops 25236
2018-01-03 20:10:12 UpdateTip: new best=00000000000000000086ed3aef84344e66870d3328bd5debfbbf18a5d4688285 height=502417 version=0x20000000 log2_work=87.79324 tx=288749882 date='2018-01-03 20:10:04' progress=1.000000 cache=112.6MiB(855803txo)
2018-01-03 20:10:12 CreateNewBlock(): block weight: 3992428 txs: 860 fees: 210806676 sigops 6272
2018-01-03 20:11:12 CreateNewBlock(): block weight: 3992460 txs: 1135 fees: 246322036 sigops 9720
2018-01-03 20:12:13 CreateNewBlock(): block weight: 3992348 txs: 1479 fees: 278896141 sigops 12880

Notice the block fees going up?

I am solo mining with Ubuntu 16, Bitcoin Core 15, BFGminer 5.4.2-29, Antminer S3.
BFGminer is requesting a new block be created by the Bitcoin core every minute like clockwork.
Is this expected behavior?
This seems to be excess work being placed on the core for no reason.
Is there a startup flag for BFGminer to control this?

Bitcoin debug.log
2018-01-03 17:39:32 CreateNewBlock(): block weight: 3992620 txs: 2293 fees: 294454986 sigops 20460
2018-01-03 17:40:32 CreateNewBlock(): block weight: 3992316 txs: 2421 fees: 363545029 sigops 24536
2018-01-03 17:41:33 CreateNewBlock(): block weight: 3992700 txs: 2581 fees: 385087979 sigops 25060
2018-01-03 17:42:33 CreateNewBlock(): block weight: 3992140 txs: 2593 fees: 408387089 sigops 26268
2018-01-03 17:43:33 CreateNewBlock(): block weight: 3992480 txs: 2609 fees: 432487630 sigops 27896
2018-01-03 17:44:33 CreateNewBlock(): block weight: 3992116 txs: 2761 fees: 452136320 sigops 29688

It seems the sequence of events should be...
- A completed block arrives in the Bitcoin core from one of the peers.
- Bitcoin Core notifies BFGminer of this blocks arrival.
- BFGminer sends a request to the core to create a new block from the available transaction in the Mem pool. “CreateNewBlock”
- Bitcoin core passes the new block to BFGminer, who then distributes the header out to the miners.

It seems that a “CreateNewBlock” would only occur when it is needed after a completed block has arrived. Can anyone shed some light on this process? Thanks.

more instrutions for the clueless would be nice I had a problem with bfgminer-5.4.2-win64 with it marking 2 of my Eruptors as Dead this morning I came to the conclution that the Serial Driver might be the cause So I installed https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers Win64 driver for Win10 I have version 1709 is this the problem Is my version too old??? I reloaded the Win10 Genaric and it works now but I still get a COM5 Error not enough Admin privlages which is BS I own the hardware.I niticed they are all set to 9600BAUD is this another error communication speed should be much higher right I did try setting it as high as my 3D printer communication rates this is when the driver crashed and I had to reinstill.... so Do you leve this com rate at 9600Baud???

Is BFGMiner 5.4.2 available for Ubuntu 16.04 users?
I have a new install of Ubuntu 16.04.
Bitcoin Core 15.1
BFGMiner 5.2.0
I am trying to upgrade to 5.4.2 to see if will resolve an issue and when I use the command
apt-get install bfgminer
it says I am already at the latest version 5.2.0. I installed it only a week ago.
How do I get upgraded to 5.4.2 if it is available for Ubuntu?

Confession: I am a newly convert to Linux so go easy on me.

I used BFGMiner to mine Bitcoin. Sorry, but I can't help with other coins. You are going to have to search the forums for specifics on XVG.

Gladly learn if I could find a f00lproof howto on getting this thingy to work.... Any pointers/examples available? Goal is to mine verge (XVG) coins...

I suppose it's fake, Mining to a regular laptop or computer cannot be done these days. You need to build a rig first or invest to a mining hardware to be able to mine. You'll be wasting your time in doing so.

Most of those one-stop solutions will steal any bits you get. Even the so-called "front ends" for BFGMiner and CGMiner are bogus. Learn to use BFG Miner.

recent some one suggest me a software for btc mining the software name is compute i run this setup in my laptop its start mining can any one tell me is this real way for mining or fake

New version works very well

Hi,

I´m getting a lot of Discarded Shares and only few accepted with cgminer so I was thinking to install BFGminer in my Antminer S3.
I´m using the NiceHash Pools and they seem to be incompatible with the cgminer.  (I tested Slushpool and the rate of Accepted Shares is like 10 per min.. A LOT BETTER)
In the NiceHash site there is info to configure cgminer but they suggest to use bfgminer...

Can BFGminer be the fix of my issue? Is it possible to install the openwrt version in the Antminer S3? Can I damage my Hardware?

Load: 1.10 1.16 1.21
Elapsed         GH/S(5s)       GH/S(avg)    FoundBlocks   LocalWork         Utility       WU       BestShare
3h 21m 33s    480.39        446.45                  0      3,681,092           0      6,236           0

Pool                                        URL                             User         Status      Diff   GetWorks Priority   Accepted   Diff1#   DiffA#   DiffR#   DiffS#   Rejected   Discarded   Stale      LSDiff      LSTime
                                                
0   stratum+tcp://sha256.eu.nicehash.com:3334   S3FirstEU           Alive      131K   577       0               22   1,256,304   2,107,392       0                0                0            742,24       0      65,536     00:52:00
1   stratum+tcp://sha256.usa.nicehash.com:3334   S3FirstUSA   Alive     131K   543       1               22   448           2,686,976      0                0                0             879,862        0      65,536      00:14:01
2   stratum+tcp://sha256.br.nicehash.com:3334   S3FirstBR            Alive    65.5K   510       2               29   272           3,276,800     196,608       0                2     142,658        0      65,536      00:01:34

Thanks!!

please which pool is the best

i pray it works for me

thank for share. I  use antminer