Topic: BitBay |Decentralized Marketplace|Smart Contracts|IoT Tech|Markets Open - page 104. (Read 339472 times)
December 09, 2014, 04:45:47 AM
I don't think the Mac wallet is updated.
It doesn't have a contracts tab.
December 09, 2014, 04:44:45 AM
Who is dumping , why dump ?
December 09, 2014, 04:42:29 AM
Sorry guys just did another 3BTC whoever is dumping is gonna make me extremly happy in 2015:))
December 09, 2014, 04:37:56 AM
Please do not make this my problem. - No-one in this discussion has yet to successfully produce a bayhalo contract, its not just me.
and no. it doesnt fill a bitmessage automatically under the receive tab. "YOUR BITMESSAGE ADDRESS:=BLANK" is this something that you guys are seeing from a old bit/black halo install the rest of us haven't done?
Ive never tried sending to a bitmessage address as I never found out the address of either/other client.
When I just tried sending to a bitmessage address i got a "Your return address is not loaded" pop up and it doesnt go thru. Not that I know the bimessage of the other client, Im just pulling one from the bitmessage client.
Since I had no bitmessage addresses, I setup 2 different gmail accounts. Both clients passed the email test - you say run it encrypted which is how i have it set.
It just hangs there pending and never shows up in the other client when trying to send between 2 email setups.
Screenshots will be posted. - I hope this info will be helpful in trying to figure out why some of us are having problems.
and no. it doesnt fill a bitmessage automatically under the receive tab. "YOUR BITMESSAGE ADDRESS:=BLANK" is this something that you guys are seeing from a old bit/black halo install the rest of us haven't done?
Ive never tried sending to a bitmessage address as I never found out the address of either/other client.
When I just tried sending to a bitmessage address i got a "Your return address is not loaded" pop up and it doesnt go thru. Not that I know the bimessage of the other client, Im just pulling one from the bitmessage client.
Since I had no bitmessage addresses, I setup 2 different gmail accounts. Both clients passed the email test - you say run it encrypted which is how i have it set.
It just hangs there pending and never shows up in the other client when trying to send between 2 email setups.
Screenshots will be posted. - I hope this info will be helpful in trying to figure out why some of us are having problems.
Ahhh OK you have an issue i have seen on some computers. BitMHalo is not working on your computer. It runs bitmessage and Halo.
Can you do a teamview with me some time so I can see why that subprocess doesnt work for you? PM me please.
December 09, 2014, 04:34:02 AM
This is how the receive tab is supposed to look like. I don't believe this starts right though. I used to have the same problem but I can't really reproduce it any more.
December 09, 2014, 04:10:29 AM
Please do not make this my problem. - No-one in this discussion has yet to successfully produce a bayhalo contract, its not just me.
and no. it doesnt fill a bitmessage automatically under the receive tab. "YOUR BITMESSAGE ADDRESS:=BLANK" is this something that you guys are seeing from a old bit/black halo install the rest of us haven't done?
Ive never tried sending to a bitmessage address as I never found out the address of either/other client.
When I just tried sending to a bitmessage address i got a "Your return address is not loaded" pop up and it doesnt go thru. Not that I know the bimessage of the other client, Im just pulling one from the bitmessage client.
Since I had no bitmessage addresses, I setup 2 different gmail accounts. Both clients passed the email test - you say run it encrypted which is how i have it set.
It just hangs there pending and never shows up in the other client when trying to send between 2 email setups.
Screenshots will be posted. - I hope this info will be helpful in trying to figure out why some of us are having problems.
and no. it doesnt fill a bitmessage automatically under the receive tab. "YOUR BITMESSAGE ADDRESS:=BLANK" is this something that you guys are seeing from a old bit/black halo install the rest of us haven't done?
Ive never tried sending to a bitmessage address as I never found out the address of either/other client.
When I just tried sending to a bitmessage address i got a "Your return address is not loaded" pop up and it doesnt go thru. Not that I know the bimessage of the other client, Im just pulling one from the bitmessage client.
Since I had no bitmessage addresses, I setup 2 different gmail accounts. Both clients passed the email test - you say run it encrypted which is how i have it set.
It just hangs there pending and never shows up in the other client when trying to send between 2 email setups.
Screenshots will be posted. - I hope this info will be helpful in trying to figure out why some of us are having problems.
December 09, 2014, 03:36:53 AM
Just wow again. You are not helping this convo at all. Stop assuming you have answers for me.
How does one send to a bitmessage address if one CANNOT put there OWN bitmessage address into the client first?
If you sent it to me, how would I receive it if MY bitmessage address in NOT in the client???
The problem is one CANNOT put their OWN bitmessage address into the client. So therefore you CANT send to me
When I see it actually working Ill join in your celebrations. That wasn't THE problem - That was HIS problem.
Still waiting on those screenshots
How does one send to a bitmessage address if one CANNOT put there OWN bitmessage address into the client first?
If you sent it to me, how would I receive it if MY bitmessage address in NOT in the client???
The problem is one CANNOT put their OWN bitmessage address into the client. So therefore you CANT send to me
Quote
OMFG that was it?! Just confusion over the BitBay and Bitmessage addresses? Beautiful. Things are looking bright.
When I see it actually working Ill join in your celebrations. That wasn't THE problem - That was HIS problem.
Still waiting on those screenshots
It generates a bitmessage address automatically for you. Look at your receive tab. When a contract is sent, the return address is sent with it. You may also choose to use a temporary email account such as a gmail and it will automatically encrypt all of the emails.
December 09, 2014, 03:32:52 AM
Why are we concerned with IRC and GoDaddy ??
NO-ONE HAS MADE A SINGLE SMART BAYHALO CONTRACT YET --- NOBODY!
If not a single person could get it to work then it just doesn't work.
The problem cannot be that we are group stupid and cannot find the "receive tab".(thanks for the tip)
Please don't tell me the solution is for us to PM David, one-at-a-time, to fix the issues we are ALL having with the smart contracting software.
Im not PMing anybody for a fix, and neither should you. (you cant take the time to even recognize that there may be a problem here, but have the time to respond to everyone's PM in here and those who downloaded the client)?
What good is it if your client works and the worlds doesn't?
We were promised working contracting software, just like they were promised 500BTC if they delivered it.
And if it doesn't work, then nobody is going to stick around. Period.
...And I am a Halo supporter.
NO-ONE HAS MADE A SINGLE SMART BAYHALO CONTRACT YET --- NOBODY!
If not a single person could get it to work then it just doesn't work.
The problem cannot be that we are group stupid and cannot find the "receive tab".(thanks for the tip)
Please don't tell me the solution is for us to PM David, one-at-a-time, to fix the issues we are ALL having with the smart contracting software.
Im not PMing anybody for a fix, and neither should you. (you cant take the time to even recognize that there may be a problem here, but have the time to respond to everyone's PM in here and those who downloaded the client)?
What good is it if your client works and the worlds doesn't?
We were promised working contracting software, just like they were promised 500BTC if they delivered it.
Quote
- 500 btc at completion of ico / delivery of initial wallet. (This threshold has been met.)
- 500 btc at delivery of wallet with integrated smart contracts
- 500 btc at delivery of our decentralized marketplace
- 500 btc at delivery of wallet with integrated smart contracts
- 500 btc at delivery of our decentralized marketplace
And if it doesn't work, then nobody is going to stick around. Period.
...And I am a Halo supporter.
Im not sure what you are referring to that doesnt work. When i edited the details tab, there was a part i changed with sending encrypted messages to a BitBay address. So just send contracts to a BITMESSAGE address directly for now. You can also send to and EMAIL address using encrypted email. The client very much works in every single other aspect.
The only people who werent able to make it work was because they were sending contracts directly to a BitBay adddress (which also should work but there was a typo, which was just a matter of me going in and changing a single letter)
December 09, 2014, 03:18:35 AM
this is the next big thing,
BUY NOW AND SHUT UP!!!!!
BUY NOW AND SHUT UP!!!!!
Lol
December 09, 2014, 03:01:56 AM
Quote
You know what man. I know the solution to your problem and I refuse to help you because you're acting like a punk.
Come back when you can act like a mature person and may be you'll get some help from one of us.
Come back when you can act like a mature person and may be you'll get some help from one of us.
One of Us? LMAO - Have another convo with David ? Enlighten us all, Please. --Who exactly are you speaking for?
Thank you for proving to everyone here exactly what you are. ALL TALK - NO SHOW
So because I'm a punk. (Just want what was promised, if that makes me a punk, so be it) NO ONE IN THE ENTIRE BITBAY COMMUNITY can have the fix. -- Classy.
Maybe, just maybe, next time when you don't know the answer, don't go embarrassing yourself with "You're a meanie, and I'm not telling"
I didn't promise you anything, jackass. I don't work for you. I'm trying to help you and you're coming here like a retard getting all bent out of shape because wallet that got released 2 days ago isn't working for you.
How about have some fcking patience and wait till David releases the video for your dumbass so you can follow step by step procedure..or may be that'll be too tough for you and you'll expect him to drive to your house so he can hold your hands and show you how to get bitmessage addres.
I'm done with you.
December 09, 2014, 02:37:03 AM
Quote
You know what man. I know the solution to your problem and I refuse to help you because you're acting like a punk.
Come back when you can act like a mature person and may be you'll get some help from one of us.
Come back when you can act like a mature person and may be you'll get some help from one of us.
One of Us? LMAO - Have another convo with David ? Enlighten us all, Please. --Who exactly are you speaking for?
Thank you for proving to everyone here exactly what you are. ALL TALK - NO SHOW
So because I'm a punk. (Just want what was promised, if that makes me a punk, so be it) NO ONE IN THE ENTIRE BITBAY COMMUNITY can have the fix. -- Classy.
Maybe, just maybe, next time when you don't know the answer, don't go embarrassing yourself with "You're a meanie, and I'm not telling"
December 09, 2014, 02:12:39 AM
Just wow again. You are not helping this convo at all. Stop assuming you have answers for me.
How does one send to a bitmessage address if one CANNOT put there OWN bitmessage address into the client first?
If you sent it to me, how would I receive it if MY bitmessage address in NOT in the client???
The problem is one CANNOT put their OWN bitmessage address into the client. So therefore you CANT send to me
When I see it actually working Ill join in your celebrations. That wasn't THE problem - That was HIS problem.
Still waiting on those screenshots
How does one send to a bitmessage address if one CANNOT put there OWN bitmessage address into the client first?
If you sent it to me, how would I receive it if MY bitmessage address in NOT in the client???
The problem is one CANNOT put their OWN bitmessage address into the client. So therefore you CANT send to me
Quote
OMFG that was it?! Just confusion over the BitBay and Bitmessage addresses? Beautiful. Things are looking bright.
When I see it actually working Ill join in your celebrations. That wasn't THE problem - That was HIS problem.
Still waiting on those screenshots
You know what man. I know the solution to your problem and I refuse to help you because you're acting like a punk.
Come back when you can act like a mature person and may be you'll get some help from one of us.
December 09, 2014, 01:02:45 AM
looks like some kind of pump
I'd hardly call 100 sats a pump.
This. At this point you could hardly call a 100 sat increase a pump... more like a correction.
December 09, 2014, 12:39:08 AM
This is nuts, someone it still trying to push the price down 
December 09, 2014, 12:29:40 AM
looks like some kind of pump
I'd hardly call 100 sats a pump.
December 08, 2014, 11:18:17 PM
looks like some kind of pump
December 08, 2014, 11:07:04 PM
Wow I think a group is trying to buy in on it. Classic fud it down then pump it up. Don't be fools.
December 08, 2014, 10:35:56 PM
If this dumping alltime when price is rising or not and weak bids will continue + btc will fall more in Dec (which is almost obvious) then 50 sat as a stable level is quite realistic.
Substantive discussion is in this thread https://bitcointalk.org/xxxxxxx
Substantive discussion is in this thread https://bitcointalk.org/xxxxxxx
So much time and energy is being spent on discrediting this coin there is no doubt it will be a success...
December 08, 2014, 09:51:24 PM
this is the next big thing,
BUY NOW AND SHUT UP!!!!!
BUY NOW AND SHUT UP!!!!!
December 08, 2014, 09:24:51 PM
Good 100 sat cheap coins for me 
Jump to: