Topic: ◈◈Bitcredit ◈◈ Migrating to UniQredit◈◈ - page 20. (Read 284560 times)
Everythingis set for mining because some amount is coming to my wallet during mining but many mined bcr are fake as well. Showing up to mu wallet and after sometime gone by it self
Same thing with pts-getwork miner. So many fake BCR coming to my wallet, and just some of them are accepted. Than miner stop to work by it self, and after 10-15 min start again. During mining it happen that sync stopped as well. When i turn of miner syncing continue. Weird
not sure how mining works. You need to provide the key to an address holding 50,000 BCR in order to be eligible to mine every 40 blocks - maybe you haven't configured that? I'm sure someone will chime in with the proper guide.
Same thing with pts-getwork miner. So many fake BCR coming to my wallet, and just some of them are accepted. Than miner stop to work by it self, and after 10-15 min start again. During mining it happen that sync stopped as well. When i turn of miner syncing continue. Weird
I have sent bid two days ago. After importing priv key nothing happen. Is there any more steps to redeem BCR?
No, you're fine, nothing more you need to do. There hasn't been any payouts for the past few days. The BTC for the period is still there and you and the rest of us bidders will get paid your corresponding BCR according to the time of bid after the round was reset and for the time that was left on that particular round. Don't know what made the system stop paying (it is automated) - there was a problem with a block, same block you had problems with, maybe that 'faulty' block was the culprit... just guessing.
I have sent bid two days ago. After importing priv key nothing happen. Is there any more steps to redeem BCR?
From yesterday sync stopped at 304 039 block. I tried again with the last bootstrap but again stopped at the same block
Turn the wallet off and then on - immediately after starting go to console and paste this: reconsiderblock 0003e19a92200c348b3fe4e075d14c26b15100af1ba737f405517e5f65e6e8a9
which is the hash for that particular block you got stuck in https://chainz.cryptoid.info/bcr/block.dws?0003e19a92200c348b3fe4e075d14c26b15100af1ba737f405517e5f65e6e8a9.htm
Thanks. I did it. It is OK now.
no need to restart
From yesterday sync stopped at 304 039 block. I tried again with the last bootstrap but again stopped at the same block
Turn the wallet off and then on - immediately after starting go to console and paste this: reconsiderblock 0003e19a92200c348b3fe4e075d14c26b15100af1ba737f405517e5f65e6e8a9
which is the hash for that particular block you got stuck in https://chainz.cryptoid.info/bcr/block.dws?0003e19a92200c348b3fe4e075d14c26b15100af1ba737f405517e5f65e6e8a9.htm
From yesterday sync stopped at 304 039 block. I tried again with the last bootstrap but again stopped at the same block
Final call for the 0.30.19.8-rc
Has anyone had any trouble syncing / sending / receiving / mining / bidding / messaging / mining / or any general operation with the wallet?
Syncing - sending - receiving works just fine.Has anyone had any trouble syncing / sending / receiving / mining / bidding / messaging / mining / or any general operation with the wallet?
I don't use the advanced capabilities of the wallet though...
Peace of mind after all this time
Final call for the 0.30.19.8-rc
Has anyone had any trouble syncing / sending / receiving / mining / bidding / messaging / mining / or any general operation with the wallet?
Has anyone had any trouble syncing / sending / receiving / mining / bidding / messaging / mining / or any general operation with the wallet?
pump in progress when to sell though, bought nice amounts at 160 need more buy orders above 300 to cover me
Mining works, but all mined amounts before second confirmation gone?
edit : WRT pic, 36kW per tx isn't just Proof Of Waste, it's fundamentally ugly. Those numbers should make any engineer cry.
Add in the upcoming Pay Through The Teeth Fees (if you want the Wasters to actually process your damn transaction before you grow old and die waiting) and BTC has as much chance of being adopted as a useful global currency as I do of winning Miss World.
And here we get laughed at by "bitcoin scientists" for saying that it is unsustainable for a payments mechanism.
edit : WRT pic, 36kW per tx isn't just Proof Of Waste, it's fundamentally ugly. Those numbers should make any engineer cry.
Add in the upcoming Pay Through The Teeth Fees (if you want the Wasters to actually process your damn transaction before you grow old and die waiting) and BTC has as much chance of being adopted as a useful global currency as I do of winning Miss World.
Not sure how feasible and secure , but i intend to have version 0.40.x use less that 2 watts per transaction. So i have 11 months to think on it.
Is there a way to mine solo with GPU and how?
Get the miner and point it at your daemon. There is windows and source version.
I forgot for the dat. Thank you!!
Silly me, i forgot for the dat file. Thank you!!!
I did it but nothing happen. Miner started but there is no mining.
conf:
rpcallowip=127.0.0.1
rpcuser=
rpcpassword=
rpcport=8776
server=1
listen=1
deamon=1
genproclimit=0
miner:
host=127.0.0.1
port=8776
rpcuser=
rpcpass=
# Number of threads requesting work from the server in parallel
getwork_threads=3
submit_threads=3
OpenCL devices to run miner on
devices=0
platform=0
are you sure device 0 is your GPU? Also your GPU must have memory > 1 GB
Yes it is r9 290 x.
with device 0 i have only this :
PTSHasher:0-0 initialized on device: Hawaii type: 4, vendor: Advanced Micro Devices, Inc., LE: 1
Sun Jan 24 17:17:30 2016 Miner Starts - 127.0.0.1:8776
with device 1 it is my CPU:
D:\Crypto\Coins\pts-getwork>miner.exe ptspool.conf
PTSHasher:0-1 initialized on device: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz type: 2, vendor: GenuineIntel, LE: 1
Exception in thread Thread-1:
Traceback (most recent call last):
File "threading.pyo", line 810, in __bootstrap_inner
File "threading.pyo", line 763, in run
File "miner.py", line 258, in miner_thread
File "miner.py", line 228, in __init__
File "pts.pyo", line 45, in __init__
MemoryError: create_buffer failed: mem object allocation failure
Sun Jan 24 17:19:44 2016 Miner Starts - 127.0.0.1:8776
Wallet mined to needs 50001+ BCR in one address and have that address in miningkeys.dat?
(Apologies if that's changed, I let dragos mine on my BNs.
)edit : WRT pic, 36kW per tx isn't just Proof Of Waste, it's fundamentally ugly. Those numbers should make any engineer cry.
Not sure how feasible and secure , but i intend to have version 0.40.x use less that 2 watts per transaction. So i have 11 months to think on it.
Is there a way to mine solo with GPU and how?
Get the miner and point it at your daemon. There is windows and source version.
I did it but nothing happen. Miner started but there is no mining.
conf:
rpcallowip=127.0.0.1
rpcuser=
rpcpassword=
rpcport=8776
server=1
listen=1
deamon=1
genproclimit=0
miner:
host=127.0.0.1
port=8776
rpcuser=
rpcpass=
# Number of threads requesting work from the server in parallel
getwork_threads=3
submit_threads=3
OpenCL devices to run miner on
devices=0
platform=0
are you sure device 0 is your GPU? Also your GPU must have memory > 1 GB
Yes it is r9 290 x.
with device 0 i have only this :
PTSHasher:0-0 initialized on device: Hawaii type: 4, vendor: Advanced Micro Devices, Inc., LE: 1
Sun Jan 24 17:17:30 2016 Miner Starts - 127.0.0.1:8776
with device 1 it is my CPU:
D:\Crypto\Coins\pts-getwork>miner.exe ptspool.conf
PTSHasher:0-1 initialized on device: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz type: 2, vendor: GenuineIntel, LE: 1
Exception in thread Thread-1:
Traceback (most recent call last):
File "threading.pyo", line 810, in __bootstrap_inner
File "threading.pyo", line 763, in run
File "miner.py", line 258, in miner_thread
File "miner.py", line 228, in __init__
File "pts.pyo", line 45, in __init__
MemoryError: create_buffer failed: mem object allocation failure
Sun Jan 24 17:19:44 2016 Miner Starts - 127.0.0.1:8776
Wallet mined to needs 50001+ BCR in one address and have that address in miningkeys.dat?
(Apologies if that's changed, I let dragos mine on my BNs.
)edit : WRT pic, 36kW per tx isn't just Proof Of Waste, it's fundamentally ugly. Those numbers should make any engineer cry.
Not sure how feasible and secure , but i intend to have version 0.40.x use less that 2 watts per transaction. So i have 11 months to think on it.
Is there a way to mine solo with GPU and how?
Get the miner and point it at your daemon. There is windows and source version.
I did it but nothing happen. Miner started but there is no mining.
conf:
rpcallowip=127.0.0.1
rpcuser=
rpcpassword=
rpcport=8776
server=1
listen=1
deamon=1
genproclimit=0
miner:
host=127.0.0.1
port=8776
rpcuser=
rpcpass=
# Number of threads requesting work from the server in parallel
getwork_threads=3
submit_threads=3
OpenCL devices to run miner on
devices=0
platform=0
are you sure device 0 is your GPU? Also your GPU must have memory > 1 GB
Yes it is r9 290 x.
with device 0 i have only this :
PTSHasher:0-0 initialized on device: Hawaii type: 4, vendor: Advanced Micro Devices, Inc., LE: 1
Sun Jan 24 17:17:30 2016 Miner Starts - 127.0.0.1:8776
with device 1 it is my CPU:
D:\Crypto\Coins\pts-getwork>miner.exe ptspool.conf
PTSHasher:0-1 initialized on device: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz type: 2, vendor: GenuineIntel, LE: 1
Exception in thread Thread-1:
Traceback (most recent call last):
File "threading.pyo", line 810, in __bootstrap_inner
File "threading.pyo", line 763, in run
File "miner.py", line 258, in miner_thread
File "miner.py", line 228, in __init__
File "pts.pyo", line 45, in __init__
MemoryError: create_buffer failed: mem object allocation failure
Sun Jan 24 17:19:44 2016 Miner Starts - 127.0.0.1:8776
Not sure how feasible and secure , but i intend to have version 0.40.x use less that 2 watts per transaction. So i have 11 months to think on it.
Is there a way to mine solo with GPU and how?
Get the miner and point it at your daemon. There is windows and source version.
I did it but nothing happen. Miner started but there is no mining.
conf:
rpcallowip=127.0.0.1
rpcuser=
rpcpassword=
rpcport=8776
server=1
listen=1
deamon=1
genproclimit=0
miner:
host=127.0.0.1
port=8776
rpcuser=
rpcpass=
# Number of threads requesting work from the server in parallel
getwork_threads=3
submit_threads=3
OpenCL devices to run miner on
devices=0
platform=0
are you sure device 0 is your GPU? Also your GPU must have memory > 1 GB
Not sure how feasible and secure , but i intend to have version 0.40.x use less that 2 watts per transaction. So i have 11 months to think on it.
Is there a way to mine solo with GPU and how?
Get the miner and point it at your daemon. There is windows and source version.
I did it but nothing happen. Miner started but there is no mining.
conf:
rpcallowip=127.0.0.1
rpcuser=
rpcpassword=
rpcport=8776
server=1
listen=1
deamon=1
genproclimit=0
miner:
host=127.0.0.1
port=8776
rpcuser=
rpcpass=
# Number of threads requesting work from the server in parallel
getwork_threads=3
submit_threads=3
OpenCL devices to run miner on
devices=0
platform=0
Jump to: