Topic: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order - page 227. (Read 531172 times)
October 16, 2016, 08:13:09 AM
it's dropped again after 13 hours
October 16, 2016, 07:46:40 AM
Mamiakimo, just let it run for a day and see what it's like then. All this starting and restarting will just cause you problems and cost you money.
it's working now for 13 hours without issue
October 16, 2016, 03:55:06 AM
Mamiakimo, just let it run for a day and see what it's like then. All this starting and restarting will just cause you problems and cost you money.
October 15, 2016, 11:00:26 PM
guys, can we access miner status from different location?
i mean i want to check each miner status from my office/home/mobile device since i put my miner at my warehouse (local ip usually 192.168.x.xxx),
so i dont have to go to my warehouse changing setting/checking/reset on miner.
i mean i want to check each miner status from my office/home/mobile device since i put my miner at my warehouse (local ip usually 192.168.x.xxx),
so i dont have to go to my warehouse changing setting/checking/reset on miner.
October 15, 2016, 07:13:58 PM
i create reboot using power supply button off/on ( EVGA 1600G2 )
and it returned to 13TH/s
what i learned from this issue is GH/S(RT) in batch17 does't display the real time value but static value or something
do you think i have a problem on my PSU ?
and it returned to 13TH/s
what i learned from this issue is GH/S(RT) in batch17 does't display the real time value but static value or something
do you think i have a problem on my PSU ?
October 15, 2016, 06:15:29 PM
before this issue happen i have kano hashrate 36-37TH/s for 3 miners
after 4 hours online on this new B17 this issue happen i have about 33-34TH/s
i lost about 3TH/s from this miner and i don't know why GH/S(RT) still display wrong static value when awesome miner read the correct value
my B17 have the lowest HT on my farm
after 4 hours online on this new B17 this issue happen i have about 33-34TH/s
i lost about 3TH/s from this miner and i don't know why GH/S(RT) still display wrong static value when awesome miner read the correct value
my B17 have the lowest HT on my farm
October 15, 2016, 05:42:08 PM
@mamiakimo why did you restart when it is/was working fine?
your previous pic had 11.63 th average
miners need some "room" to function and they are capable of adjusting themselves.
to me frequent restarting indicates more chances for trouble
your previous pic had 11.63 th average
miners need some "room" to function and they are capable of adjusting themselves.
to me frequent restarting indicates more chances for trouble
like what i said
awesome miner read the hashrate equal 9
and Kano pool too read it less than 10 TH/s
i have another 3 S9 600&550 and kano read there hashrate more than this machine
i think GH/S(RT) display wrong value
October 15, 2016, 05:37:48 PM
@mamiakimo why did you restart when it is/was working fine?
your previous pic had 11.63 th average
miners need some "room" to function and they are capable of adjusting themselves.
to me frequent restarting indicates more chances for trouble
your previous pic had 11.63 th average
miners need some "room" to function and they are capable of adjusting themselves.
to me frequent restarting indicates more chances for trouble
October 15, 2016, 05:37:09 PM
after restart it seem like GH/S(avg) display the real hashrate and GH/S(RT) just display static wrong hashrate
No.Your six minutes average is indeed 8809.98Gh/s
and the real time hash rate at that very moment is 12768.53Gh/s.
Few minutes averages are not interesting at all.
What you should be looking for is few hours average.
October 15, 2016, 05:33:58 PM
after restart it seem like GH/S(avg) display the real hashrate and GH/S(RT) just display static wrong hashrate
October 15, 2016, 05:03:46 PM
awesome Miner read the new S9 Batch 17 hashrate 9TH/s
and my pool read it like that
but the miner page display full rate !
what's the wrong here ?
and my pool read it like that
but the miner page display full rate !
what's the wrong here ?
October 15, 2016, 02:07:15 PM
just ordered this to give it a shot
http://www.ebay.com/itm/221378467457?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
since its non electrically conductive at all unlike the other stuff
Yes, I can say that it's really great. I bought it 1 month ago because I needed it for something and I liked it. I can't say you if seller will give you high quality one but in my country's localstore the one I bought was really great. You give a nice shot when you ordered it. http://www.ebay.com/itm/221378467457?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
since its non electrically conductive at all unlike the other stuff
October 15, 2016, 02:07:00 PM
May be a stupid question but has anyone changed the fans for quieter ones on the S9? How does it perform temp wise and noise wise?
October 15, 2016, 01:47:41 PM
Here's a few links of former firmware.
They were at least downloadable till batch13.
It is highly possible, these files don't work with actual batches, make them useless,destroy them, let'em explode or so.
So any download and/or use at own risk.
schnaldi.myds.me/S9/s9-20160624-650M.tar.gz
schnaldi.myds.me/S9/Antminer-S9-201607131442-11.85T-550M-security.tar.gz
schnaldi.myds.me/S9/Antminer-S9-201607131442-12.92T-600M-security.tar.gz
schnaldi.myds.me/S9/Antminer-S9-201607131440-14T-650M-security.tar.gz
They were at least downloadable till batch13.
It is highly possible, these files don't work with actual batches, make them useless,destroy them, let'em explode or so.
So any download and/or use at own risk.
schnaldi.myds.me/S9/s9-20160624-650M.tar.gz
schnaldi.myds.me/S9/Antminer-S9-201607131442-11.85T-550M-security.tar.gz
schnaldi.myds.me/S9/Antminer-S9-201607131442-12.92T-600M-security.tar.gz
schnaldi.myds.me/S9/Antminer-S9-201607131440-14T-650M-security.tar.gz
Thank you
October 15, 2016, 09:49:16 AM
i have over 80 PCB temp 
and i can't change fan speed
and i can't change fan speed
what is your room temp? my PCB temp average 65-71 max (Asian country)i have 3 other S9 with 90% fan speed and temp lower than 65C
this batch 17 not allowed to change fan speed so this what happen
October 15, 2016, 09:43:05 AM
i have over 80 PCB temp
and i can't change fan speed
and i can't change fan speed
what is your room temp? my PCB temp average 65-71 max (Asian country) October 15, 2016, 09:30:20 AM
i have over 80 PCB temp
and i can't change fan speed
and i can't change fan speed
October 15, 2016, 08:49:13 AM
they make this changes without telling us!
and i need now to wait more than 15 minutes every time i have power cut or rebooted my miners
and i need now to wait more than 15 minutes every time i have power cut or rebooted my miners
October 15, 2016, 08:13:42 AM
@mamiakimo
https://bitcointalksearch.org/topic/s9-batch-16-and-auto-tune-issues-1645898
NotFuzzyWarm has reported that the booting takes a long time for the newest batches.
Have you waited for like 20-30 minutes?
https://bitcointalksearch.org/topic/s9-batch-16-and-auto-tune-issues-1645898
NotFuzzyWarm has reported that the booting takes a long time for the newest batches.
Have you waited for like 20-30 minutes?
October 15, 2016, 08:07:03 AM
i get this in the front page
Hardware Version Socket connect failed: Connection refused
Hardware Version Socket connect failed: Connection refused
Jump to: