Topic: █=█ BoostCoin █=█ New team, new plans - page 137. (Read 299700 times)
I am a bit hesitant to invest since its already up over 500% since 2 days ago. What is the potential of this coin?
well, look at XC
500% is nothing
I dont know if its comparable to XC. XC has a unique anon feature and is much more rare at around 5m after mining is over. Lets stick to boost.. what is the benefit of x13 and why should investors buy this coin right now?
Yess would like to hear why should i invest in this coin ??
15 coins every block how does that work out ? i could be wrong but seems like that jumps your premine from 1% to 4%
Finally another one who sees this
From my previous post.
hey dev do you wish to comment on the following?
Whats the exact number of coins PREMINED? 1% of total coins?
1% of 40M is 400,000. Add to that 15 from every block which equates to 43200 x 15 = 648,000.
Making a grand total of 1,048,000
So ...
Premine has so far been used for paying back a lot of compensation for the coins lost before relaunch (Yes i'm a dev who actually does that!!), and for promotional stuff.
the foundation has so far been used to employ 2 PR members, which are doing an awesome job!
Dont forget that the foundation doesn't get 15 from every single block created. Any orphan blocks or ones created when the wallet is offline do not end up in the wallet. Also i posted about the OSX wallet recently? yes the foundation coins were in there for a while and as a result lost some... during the problems...
Im trying to be as open about all of this as possible. All i want is for this coin to be successful and for everyone to enjoy being a part of it.
Fair enough. I never believed in working for free. But you still haven't said how many premined coins? 1% of what number?
Can you post the addresses of the premined coins?
http://bst.pool.mn/ is ready for mining! Welcome!
http://bst.pool.mn offers:
• 0.99% fees
• Powerful dedicated server
• DDOS Protection
• Friendly support via email, jabber or support forums
• Skilled admin
Please, join us
http://bst.pool.mn offers:
• 0.99% fees
• Powerful dedicated server
• DDOS Protection
• Friendly support via email, jabber or support forums
• Skilled admin
Please, join us
I am a bit hesitant to invest since its already up over 500% since 2 days ago. What is the potential of this coin?
well, look at XC
500% is nothing
I dont know if its comparable to XC. XC has a unique anon feature and is much more rare at around 5m after mining is over. Lets stick to boost.. what is the benefit of x13 and why should investors buy this coin right now?
i got compensated for lost coins. shows the dev cares about the image of his work.
I am a bit hesitant to invest since its already up over 500% since 2 days ago. What is the potential of this coin?
well, look at XC
500% is nothing
I dont know if its comparable to XC. XC has a unique anon feature and is much more rare at around 5m after mining is over. Lets stick to boost.. what is the benefit of x13 and why should investors buy this coin right now?
15 coins every block how does that work out ? i could be wrong but seems like that jumps your premine from 1% to 4%
Finally another one who sees this
From my previous post.
hey dev do you wish to comment on the following?
Whats the exact number of coins PREMINED? 1% of total coins?
1% of 40M is 400,000. Add to that 15 from every block which equates to 43200 x 15 = 648,000.
Making a grand total of 1,048,000
So ...
Premine has so far been used for paying back a lot of compensation for the coins lost before relaunch (Yes i'm a dev who actually does that!!), and for promotional stuff.
the foundation has so far been used to employ 2 PR members, which are doing an awesome job!
Dont forget that the foundation doesn't get 15 from every single block created. Any orphan blocks or ones created when the wallet is offline do not end up in the wallet. Also i posted about the OSX wallet recently? yes the foundation coins were in there for a while and as a result lost some... during the problems...
Im trying to be as open about all of this as possible. All i want is for this coin to be successful and for everyone to enjoy being a part of it.
15 coins every block how does that work out ? i could be wrong but seems like that jumps your premine from 1% to 4%
Finally another one who sees this
From my previous post.
hey dev do you wish to comment on the following?
Whats the exact number of coins PREMINED? 1% of total coins?
1% of 40M is 400,000. Add to that 15 from every block which equates to 43200 x 15 = 648,000.
Making a grand total of 1,048,000
In regards to the 15 a block going to dev , so i can make sure it isn't getting dumped, may you please kindly link the address to be transparent with, im sure its in the code but i cant be fucked to find it....
BKqAh5ojyS7bkjaDHJEWXxMwKNUvUsNZak
XC devs did 135k premine that's like 500btc at current prices.
True and they said the exact number of coins. On the other hand BOOST dev just said 1%. So my question is 1% of total 40M coins or 22,248,000 based on the POW mined blocks? Either way the dev is going to have over a 650K coins by the end of POW phase. I am by no means implying anything, the dev can be the next Mother Teresa and not dump a single coin and use the premined coins to actually further the coin or he can....
I am asking for a bit more transparency of the premined and 15 reward per block
I am a bit hesitant to invest since its already up over 500% since 2 days ago. What is the potential of this coin?
well, look at XC
500% is nothing
Can anybody tell me lamans terms why X13 is an improvement over X11? And are the current prices undervalued? I am a bit hesitant to invest since its already up over 500% since 2 days ago. What is the potential of this coin?
15 coins every block how does that work out ? i could be wrong but seems like that jumps your premine from 1% to 4%
Finally another one who sees this
From my previous post.
hey dev do you wish to comment on the following?
Whats the exact number of coins PREMINED? 1% of total coins?
1% of 40M is 400,000. Add to that 15 from every block which equates to 43200 x 15 = 648,000.
Making a grand total of 1,048,000
In regards to the 15 a block going to dev , so i can make sure it isn't getting dumped, may you please kindly link the address to be transparent with, im sure its in the code but i cant be fucked to find it....
BKqAh5ojyS7bkjaDHJEWXxMwKNUvUsNZak
XC devs did 135k premine that's like 500btc at current prices.
15 coins every block how does that work out ? i could be wrong but seems like that jumps your premine from 1% to 4%
Finally another one who sees this
From my previous post.
hey dev do you wish to comment on the following?
Whats the exact number of coins PREMINED? 1% of total coins?
1% of 40M is 400,000. Add to that 15 from every block which equates to 43200 x 15 = 648,000.
Making a grand total of 1,048,000
I have a 7970 card and get about 1.4 MH/s is that normal? 
Follow mining guide from page 1
https://bitcointalksearch.org/topic/m.6978692
If you are not seeing the results others have reported check your catalyst driver version. Some older drivers do not perform well (or at all).
I have a 7970 card and get about 1.4 MH/s is that normal?
Follow mining guide from page 1
https://bitcointalksearch.org/topic/m.6978692
Thanks! I did follow all those instructions but had to change some commands which had extra spaces and that was causing SGminer to crash. It's hashing at over 2mh/s now woohoo!
Does anyone have settings for R9 290 and R9 290x? Thanks!
I have 290's 2 are MSI and 2 are Gigabyte
Code:
"intensity" : "22",
"worksize" : "256,256,256,256",
"kernel" : "x13mod,x13mod,x13mod,x13mod",
"lookup-gap" : "2,2,2,2",
"thread-concurrency" : "28500,48552,28500,48552",
"shaders" : "2048,2048,2048,2048",
"gpu-threads" : "1,1,1,1",
"gpu-engine" : "1030-1030,1050-1050,1030-1030,1050-1050",
"gpu-fan" : "40-100,40-100,40-100,40-100",
"gpu-memclock" : "1350,1500,1350,1500",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "20,20,20,20",
"gpu-vddc" : "0.000,0.000,0.000,0.000",
"temp-cutoff" : "95,95,95,95",
"temp-overheat" : "90,90,90,90",
"temp-target" : "80,80,80,80",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "20",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"api-allow" : "W:127.0.0.1"
"worksize" : "256,256,256,256",
"kernel" : "x13mod,x13mod,x13mod,x13mod",
"lookup-gap" : "2,2,2,2",
"thread-concurrency" : "28500,48552,28500,48552",
"shaders" : "2048,2048,2048,2048",
"gpu-threads" : "1,1,1,1",
"gpu-engine" : "1030-1030,1050-1050,1030-1030,1050-1050",
"gpu-fan" : "40-100,40-100,40-100,40-100",
"gpu-memclock" : "1350,1500,1350,1500",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "20,20,20,20",
"gpu-vddc" : "0.000,0.000,0.000,0.000",
"temp-cutoff" : "95,95,95,95",
"temp-overheat" : "90,90,90,90",
"temp-target" : "80,80,80,80",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "20",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"api-allow" : "W:127.0.0.1"
I have a 7970 card and get about 1.4 MH/s is that normal?
Follow mining guide from page 1
https://bitcointalksearch.org/topic/m.6978692
I have a 7970 card and get about 1.4 MH/s is that normal?
15 coins every block how does that work out ? i could be wrong but seems like that jumps your premine from 1% to 4%
i am getting on 7950 with x13mod 2.26 mh/s! wow ! who have 7950 ?
p.s. omg 7950 with new settings 2.5-2.6 mh/s !
p.s. omg 7950 with new settings 2.5-2.6 mh/s !
Would you post your settings please?
"failover-only" : true,
"no-pool-disable" : true,
"kernel" : "x13mod",
"gpu-threads" : "4",
"gpu-powertune" : "20",
"intensity" : "20, 20",
"worksize" : "128",
"lookup-gap" : "2",
"thread-concurrency" : "24000",
"shaders" : "1792,1792",
"gpu-engine" : "1100,1200",
"gpu-fan" : "75-100,50-100",
"gpu-memclock" : "1200,1200",
"gpu-powertune" : "-10,20",
"auto-fan" : true,
"temp-cutoff" : "95,95",
"temp-overheat" : "85,85",
"temp-target" : "75,70"
first card msi 7950 oc be with mon ~2.3mh/s
secon card sapphire vapor-x 7950 ~2.5-2.6mh/s
Jump to: