Topic: █=█ BoostCoin █=█ New team, new plans - page 138. (Read 299700 times)
I cannot mine this, i get HW errors discarded work while i choose the good kernel and the good pool port
New Pool:
@Admin: Please add us to OP !
http://bost.poolone.pw
-
X13 Stratum (from ocminer,thx!), Vardiff
MPOS + Latest Patches
Tested to find blocks !
Payouts every minute
Support !
0% fee during first 24h !
OPEN Registration !
-
X13 Stratum (from ocminer,thx!), Vardiff
MPOS + Latest Patches
Tested to find blocks !
Payouts every minute
Support !
0% fee during first 24h !
OPEN Registration !
@Admin: Please add us to OP !
Still lots of free slots for you guys, try us, we're fee and our reg is open !
How do I fix Error 11 in SGminer? I am getting Error 11 and I have an Intel i7-4770K. Can't figure out what to do. I am trying to get this to work on my HD 5850
This coin should be in high 100k. possible 400k satoshis. its first in his kind POW/POS/13. the dev has enough donation to push it forward and use to get services.
sell it low now and regret later. i said this when it was 800 satoshis and some of you did not belive. then i said id again when it hit 4000 and now i am saying again at 15000 satoshis. don't sell it cheap : )
sell it low now and regret later. i said this when it was 800 satoshis and some of you did not belive. then i said id again when it hit 4000 and now i am saying again at 15000 satoshis. don't sell it cheap : )
I learned this the hard way on naut.. I know some people got it at 400 satoshi. I got in at 5k and I sold at 17k.
I then got in for 5k at x11 coin and I sold at 20k. Cozz I sold on a dump. I thought it was over and would get dumped.. Well guess I Was wrong badly.......
Does anyone have some good .Bat settings for 7970 card?
hey dev do you wish to comment on the following?
Whats the exact number of coins PREMINED? 1% of total coins?
1% of 40M is 400,000. Add to that 15 from every block which equates to 43200 x 15 = 648,000.
Making a grand total of 1,048,000
Whats the exact number of coins PREMINED? 1% of total coins?
1% of 40M is 400,000. Add to that 15 from every block which equates to 43200 x 15 = 648,000.
Making a grand total of 1,048,000
i am getting on 7950 with x13mod 2.26 mh/s! wow ! who have 7950 ?
p.s. omg 7950 with new settings 2.5-2.6 mh/s !
p.s. omg 7950 with new settings 2.5-2.6 mh/s !
you can write the settings that you use? thanks
dear tommyj1, here ya go:
latest x11mod & x13mod + increased time to SICK state:
https://www.dropbox.com/s/umdtns7vfvpnca4/X13mod.zip
original thread: https://bitcointalksearch.org/topic/annx11x13-x11-darkcoinx13-marucoin-miner-based-on-sph-sgminer-623409
have fun.
latest x11mod & x13mod + increased time to SICK state:
https://www.dropbox.com/s/umdtns7vfvpnca4/X13mod.zip
original thread: https://bitcointalksearch.org/topic/annx11x13-x11-darkcoinx13-marucoin-miner-based-on-sph-sgminer-623409
have fun.
can you add your .bat settings? i have gigabyte rev 2 but only get's 1.7 mh/s
Settings for 280x Gigabyte rev.2
Quote
"intensity" : "22,22,22",
"worksize" : "256,256,256",
"kernel" : "x13mod",
"lookup-gap" : "2,2,2",
"thread-concurrency" : "8192,8192,8192",
"gpu-threads" : "2,2,2",
"gpu-engine" : "1150-1150,1150-1150,1150-1150",
"gpu-fan" : "50-100,50-100,50-100",
"gpu-memclock" : "1500,1500,1500",
"gpu-memdiff" : "0,0,0",
"gpu-powertune" : "20,20,20",
"gpu-vddc" : "0.000,0.000,0.000",
"temp-cutoff" : "80,80,80",
"temp-overheat" : "75,75,75",
"temp-target" : "70,70,70",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "20",
"failover-only" : true,
"failover-switch-delay" : "10",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "10",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"api-allow" : "W:127.0.0.1,W:192.168.1.0/24"
}
"worksize" : "256,256,256",
"kernel" : "x13mod",
"lookup-gap" : "2,2,2",
"thread-concurrency" : "8192,8192,8192",
"gpu-threads" : "2,2,2",
"gpu-engine" : "1150-1150,1150-1150,1150-1150",
"gpu-fan" : "50-100,50-100,50-100",
"gpu-memclock" : "1500,1500,1500",
"gpu-memdiff" : "0,0,0",
"gpu-powertune" : "20,20,20",
"gpu-vddc" : "0.000,0.000,0.000",
"temp-cutoff" : "80,80,80",
"temp-overheat" : "75,75,75",
"temp-target" : "70,70,70",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "20",
"failover-only" : true,
"failover-switch-delay" : "10",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "10",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"api-allow" : "W:127.0.0.1,W:192.168.1.0/24"
}
Im using PIMP, so i followed this step-by-step =>
Quote
cd /opt/
rm -frv sph-sgminer
git clone git://github.com/lasybear/sph-sgminer_x11mod.git
mv ./sph-sgminer_x11mod/ ./sph-sgminer/
cd sph-sgminer
cp -av /opt/ADL-SDK/*.h ./ADL_SDK/
autoreconf -fvi
./configure CFLAGS="-O2 -Wall -march=native" --enable-opencl --enable-gridseed
make
make install
rm -frv sph-sgminer
git clone git://github.com/lasybear/sph-sgminer_x11mod.git
mv ./sph-sgminer_x11mod/ ./sph-sgminer/
cd sph-sgminer
cp -av /opt/ADL-SDK/*.h ./ADL_SDK/
autoreconf -fvi
./configure CFLAGS="-O2 -Wall -march=native" --enable-opencl --enable-gridseed
make
make install
cheers.
edit: just a bad copy, up and running now
Could anyone please help me get my HD 5850 running? I am getting Error 11, not sure how to get rid of it.
i am getting on 7950 with x13mod 2.26 mh/s! wow ! who have 7950 ?
p.s. omg 7950 with new settings 2.5-2.6 mh/s !
p.s. omg 7950 with new settings 2.5-2.6 mh/s !
Would you post your settings please?
Does anyone have settings for R9 290 and R9 290x? Thanks!
Done some calculations so far 6879837 coins have been created...
When PoW is over does that mean mining is no longer possible? sorry for the dumb question, I'm still learning
Yes, thats correct. After that transaction will be processed directly through the wallet's using PoS.When does the PoW phase end?
At block 43200
The difference between this coin and other PoW/PoS is the new algo, X13, right? But is the only difference between X11 and X13 a couple extra scientific hashing algo's? Is added security all that this provides?
Yes and the fact that it is the furthest away from ASIC ming that any other Algo
When PoW is over does that mean mining is no longer possible? sorry for the dumb question, I'm still learning
Yes, thats correct. After that transaction will be processed directly through the wallet's using PoS.When does the PoW phase end?
The difference between this coin and other PoW/PoS is the new algo, X13, right? But is the only difference between X11 and X13 a couple extra scientific hashing algo's? Is added security all that this provides?
When PoW is over does that mean mining is no longer possible? sorry for the dumb question, I'm still learning
Yes, thats correct. After that transaction will be processed directly through the wallet's using PoS. can you add your .bat settings? i have gigabyte rev 2 but only get's 1.7 mh/s
Settings for 280x Gigabyte rev.2
Quote
"intensity" : "22,22,22",
"worksize" : "256,256,256",
"kernel" : "x13mod",
"lookup-gap" : "2,2,2",
"thread-concurrency" : "8192,8192,8192",
"gpu-threads" : "2,2,2",
"gpu-engine" : "1150-1150,1150-1150,1150-1150",
"gpu-fan" : "50-100,50-100,50-100",
"gpu-memclock" : "1500,1500,1500",
"gpu-memdiff" : "0,0,0",
"gpu-powertune" : "20,20,20",
"gpu-vddc" : "0.000,0.000,0.000",
"temp-cutoff" : "80,80,80",
"temp-overheat" : "75,75,75",
"temp-target" : "70,70,70",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "20",
"failover-only" : true,
"failover-switch-delay" : "10",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "10",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"api-allow" : "W:127.0.0.1,W:192.168.1.0/24"
}
"worksize" : "256,256,256",
"kernel" : "x13mod",
"lookup-gap" : "2,2,2",
"thread-concurrency" : "8192,8192,8192",
"gpu-threads" : "2,2,2",
"gpu-engine" : "1150-1150,1150-1150,1150-1150",
"gpu-fan" : "50-100,50-100,50-100",
"gpu-memclock" : "1500,1500,1500",
"gpu-memdiff" : "0,0,0",
"gpu-powertune" : "20,20,20",
"gpu-vddc" : "0.000,0.000,0.000",
"temp-cutoff" : "80,80,80",
"temp-overheat" : "75,75,75",
"temp-target" : "70,70,70",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "20",
"failover-only" : true,
"failover-switch-delay" : "10",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "10",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"api-allow" : "W:127.0.0.1,W:192.168.1.0/24"
}
Im using PIMP, so i followed this step-by-step =>
Quote
cd /opt/
rm -frv sph-sgminer
git clone git://github.com/lasybear/sph-sgminer_x11mod.git
mv ./sph-sgminer_x11mod/ ./sph-sgminer/
cd sph-sgminer
cp -av /opt/ADL-SDK/*.h ./ADL_SDK/
autoreconf -fvi
./configure CFLAGS="-O2 -Wall -march=native" --enable-opencl --enable-gridseed
make
make install
rm -frv sph-sgminer
git clone git://github.com/lasybear/sph-sgminer_x11mod.git
mv ./sph-sgminer_x11mod/ ./sph-sgminer/
cd sph-sgminer
cp -av /opt/ADL-SDK/*.h ./ADL_SDK/
autoreconf -fvi
./configure CFLAGS="-O2 -Wall -march=native" --enable-opencl --enable-gridseed
make
make install
cheers.
Jump to: