Topic: ★★★★ [CAIx] ★ First 100% PoS At Launch ★ PSP ★★★★ - page 197. (Read 416461 times)
waht is wallet password ?
Lucky pool!
幸运池
Four times more profitable!
四倍更有利可图！
http://cai.coinsprofit.com/index.php?page=register
Welcome to mine with us!
幸运池
Four times more profitable!
四倍更有利可图！
http://cai.coinsprofit.com/index.php?page=register
Welcome to mine with us!
There are so many new coins that most likely this coin will die. You never know though. It could go to the moon.
I used to invest in every new coin but now it is at the point where it is hard to find early investors for new coins. Too many coins to invest in, not enough investors.
I used to invest in every new coin but now it is at the point where it is hard to find early investors for new coins. Too many coins to invest in, not enough investors.
you guys need to be patient on the exchange 
it's only day one.
Do not trade coins on forums without trusted escrow.
it's only day one.
Do not trade coins on forums without trusted escrow.
Guys I have a problem....
Mine with vertminer 1st time and get only 295KHash
I have 280x Gigabyte
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR A0
vertminer.exe --scrypt-vert -o stratum+tcp://*** -u *** -p *** -I 13 -w 256 -g 1 --lookup-gap 2 --thread-concurrency 8193 -I 13 --gpu-powertune -15 --gpu-engine 1050 --gpu-memclock 1500 --queue 3 --scan-time 1 --expiry 30 --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --gpu-powertune -15 --gpu-fan auto
anybody have any idea why so low?
Mine with vertminer 1st time and get only 295KHash
I have 280x Gigabyte
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR A0
vertminer.exe --scrypt-vert -o stratum+tcp://*** -u *** -p *** -I 13 -w 256 -g 1 --lookup-gap 2 --thread-concurrency 8193 -I 13 --gpu-powertune -15 --gpu-engine 1050 --gpu-memclock 1500 --queue 3 --scan-time 1 --expiry 30 --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --gpu-powertune -15 --gpu-fan auto
anybody have any idea why so low?
try gpu engine 1000, my 280x prefer the lower setting on vertminer
-g 2 and change TC to 8192, this adding 1 to 2048x4 has never worked for me...
Thnx guys
clock 1000 and g2 with TC 8192 and getting now ~345 KHs super!!! THNX "beer" 
remember dont push sell orders down if there are no buy orders, patience 
Guys I have a problem....
Mine with vertminer 1st time and get only 295KHash
I have 280x Gigabyte
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR A0
vertminer.exe --scrypt-vert -o stratum+tcp://*** -u *** -p *** -I 13 -w 256 -g 1 --lookup-gap 2 --thread-concurrency 8193 -I 13 --gpu-powertune -15 --gpu-engine 1050 --gpu-memclock 1500 --queue 3 --scan-time 1 --expiry 30 --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --gpu-powertune -15 --gpu-fan auto
anybody have any idea why so low?
Mine with vertminer 1st time and get only 295KHash
I have 280x Gigabyte
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR A0
vertminer.exe --scrypt-vert -o stratum+tcp://*** -u *** -p *** -I 13 -w 256 -g 1 --lookup-gap 2 --thread-concurrency 8193 -I 13 --gpu-powertune -15 --gpu-engine 1050 --gpu-memclock 1500 --queue 3 --scan-time 1 --expiry 30 --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --gpu-powertune -15 --gpu-fan auto
anybody have any idea why so low?
try gpu engine 1000, my 280x prefer the lower setting on vertminer
-g 2 and change TC to 8192, this adding 1 to 2048x4 has never worked for me...
Official pool Broken Arrow needs miners: http://cai.broken-arrow.pl
www.coin-swap.net is crap.. minimum 12 cai coins per trade? wtf is that? lets get this on bittrex.com!!!
Im planing to buy some, but need something better then coin-swap 
Hope to get on bittrex they take almost every new alt recently...
+1
Guys I have a problem....
Mine with vertminer 1st time and get only 295KHash
I have 280x Gigabyte
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR A0
vertminer.exe --scrypt-vert -o stratum+tcp://*** -u *** -p *** -I 13 -w 256 -g 1 --lookup-gap 2 --thread-concurrency 8193 -I 13 --gpu-powertune -15 --gpu-engine 1050 --gpu-memclock 1500 --queue 3 --scan-time 1 --expiry 30 --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --gpu-powertune -15 --gpu-fan auto
anybody have any idea why so low?
Mine with vertminer 1st time and get only 295KHash
I have 280x Gigabyte
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR A0
vertminer.exe --scrypt-vert -o stratum+tcp://*** -u *** -p *** -I 13 -w 256 -g 1 --lookup-gap 2 --thread-concurrency 8193 -I 13 --gpu-powertune -15 --gpu-engine 1050 --gpu-memclock 1500 --queue 3 --scan-time 1 --expiry 30 --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --gpu-powertune -15 --gpu-fan auto
anybody have any idea why so low?
try gpu engine 1000, my 280x prefer the lower setting on vertminer
Im planing to buy some, but need something better then coin-swap
Hope to get on bittrex they take almost every new alt recently...
Guys I have a problem....
Mine with vertminer 1st time and get only 295KHash
I have 280x Gigabyte
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR A0
vertminer.exe --scrypt-vert -o stratum+tcp://*** -u *** -p *** -I 13 -w 256 -g 1 --lookup-gap 2 --thread-concurrency 8193 -I 13 --gpu-powertune -15 --gpu-engine 1050 --gpu-memclock 1500 --queue 3 --scan-time 1 --expiry 30 --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --gpu-powertune -15 --gpu-fan auto
anybody have any idea why so low?
Mine with vertminer 1st time and get only 295KHash
I have 280x Gigabyte
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR A0
vertminer.exe --scrypt-vert -o stratum+tcp://*** -u *** -p *** -I 13 -w 256 -g 1 --lookup-gap 2 --thread-concurrency 8193 -I 13 --gpu-powertune -15 --gpu-engine 1050 --gpu-memclock 1500 --queue 3 --scan-time 1 --expiry 30 --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --gpu-powertune -15 --gpu-fan auto
anybody have any idea why so low?
password ?
Im planing to buy some, but need something better then coin-swap
omg 3 sell orders on Coin-swap.net lol.. is there another exchange for this coin???
I updated the italian thread to the latest OP version:
https://bitcointalksearch.org/topic/annbounties-caishen-coin-scrypt-adaptive-n-kgwno-asicslow-energy-527997
https://bitcointalksearch.org/topic/annbounties-caishen-coin-scrypt-adaptive-n-kgwno-asicslow-energy-527997
Hashes spread are better now, but still nitro has 51+
Turn off it please... for a hour Roll Eyes
Turn off it please... for a hour Roll Eyes
Not this again!
lol
I have turned off signups and invitations from first hour shut down pool twice. And hashrate is spreading now.
we are not at 51%. and I will not open signups/invites till we are beat on hashes. I keep telling Serapher I do not
want the Mpos with the Brain control button, but he keeps pushing that version on me. Just waiting for block 500
to get some better difficulty adjustment.
I'm using Vertminer, can someone with a 280X share their .bat file settings, best I can get right now is 138Khs.
Getting 361 Kh/s with Stock Windows Drivers:
{
"pools" : [
{
"url" : "stratum+tcp://caishen.leetpools.net:3333",
"user" : "User",
"pass" : "x"
}
],
"intensity" : "13",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"gpu-engine" : "1000",
"gpu-fan" : "20-100",
"auto-fan" : true,
"gpu-memclock" : "1500",
"gpu-powertune" : "50",
"temp-cutoff" : "95",
"temp-overheat" : "90",
"temp-target" : "70",
"expiry" : "30",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"scrypt-vert" : true
}
Does anyone have a 7950? What hashrates are u getting?
For HD7950 try this using the miner version 0.5.3 gives a very stable 290kh/s. Then try increase intensity, I 20 gives me 314kh/s but then crashed after a few hours, I 19 seems to be hanging on by a thread at 304kh/s
--scrypt-vert -w 256 -g 1 --shaders 1792 --lookup-gap 2 --gpu-reorder -I 18 --gpu-vddc 1.12 --auto-gpu --gpu-powertune 20 --gpu-engine 1050 --gpu-memclock 1250 --gpu-fan 60-85 --auto-fan --temp-target 68 --temp-overheat 80 --temp-cutoff 90 --queue 0 --scan-time 1 --expiry 10
Do not set tc for first time running. The shaders only setting generates a thread concurrency of 19712 automatically for mine. This only works in 0.5.3
Jump to: