[Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 108.

wolverine5pl

sr. member

Activity: 437

Merit: 250

Quote from: dragonmike on December 10, 2017, 03:33:24 PM

Quote from: Omg9500 on December 10, 2017, 08:12:28 AM

I am having a problem with cast-xmr klatest version ) which mines at only 3100 h/s whereas claymore reaches 7400 h/s on the same system....

Win10 64 uptodate
6 Sapphire RX580 cards with modified BIOS
4 MSI RX580 cards with modified BIOS
AMD driver 17.11.2 (Blockchain beta drivers not working for me because only upto 8 cards supported)

Any ideas?

I'll give you a hint.
Your answer is in the title of this thread.
It's a bit hidden, I'll admit, but it's one very specific word you're looking for.

I'll help.
It's located between the words RX and GPUs.

I have used this on my spphire rx 480 (WHICH ISNT VEGA) and was hitting 760-780 hashes but i had blockchain drivers.
I think is the drivers you using. Sell your cards buy vegas:P

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: Omg9500 on December 10, 2017, 08:12:28 AM

I am having a problem with cast-xmr klatest version ) which mines at only 3100 h/s whereas claymore reaches 7400 h/s on the same system....

Win10 64 uptodate
6 Sapphire RX580 cards with modified BIOS
4 MSI RX580 cards with modified BIOS
AMD driver 17.11.2 (Blockchain beta drivers not working for me because only upto 8 cards supported)

Any ideas?

I'll give you a hint.
Your answer is in the title of this thread.
It's a bit hidden, I'll admit, but it's one very specific word you're looking for.

I'll help.
It's located between the words RX and GPUs.

Jackkyy

full member

Activity: 252

Merit: 100

maybe problem in drivers who you use Sad

Omg9500

newbie

Activity: 112

Merit: 0

I am having a problem with cast-xmr klatest version ) which mines at only 3100 h/s whereas claymore reaches 7400 h/s on the same system....

Win10 64 uptodate
6 Sapphire RX580 cards with modified BIOS
4 MSI RX580 cards with modified BIOS
AMD driver 17.11.2 (Blockchain beta drivers not working for me because only upto 8 cards supported)

Any ideas?

wolverine5pl

sr. member

Activity: 437

Merit: 250

Quote from: P00P135 on December 10, 2017, 07:26:58 AM

Quote from: nevermind41 on December 10, 2017, 05:55:20 AM

I use windows 8.1 in my rigs with beta blockchain dag fix driver. The official blockchain does not have windows 8.1 support. I tried cast xmr and it says ''blockchain compute driver not detected'' So how can I fix it?

Use windows 10. You can mine on it for free.

Hard to believe but yeah. windows 10 for free for mining rig Grin

would be great if amd released full blockchain driver not just beta

entity279

newbie

Activity: 13

Merit: 0

Quote from: Iron1 on December 10, 2017, 12:43:46 AM

Is there any timeline for updating this miner to work with new drivers?

The blockchain drivers are horrid compared newer drivers.

I tried using STACK without blockchain drivers and the drop of performance is there, can't get past 1400 - 1500 h/s . So both STACK and CAST run way worse without blockchain, in my experience. Therefore, it's maybe up to AMD to fix this in newer drivers (it'd be a pity if they wont as this mostly hurts gamers, not miners with dedicated rigs) or up to us to find what to set/tune in current drivers to make them behave similarly. Maybe there's a noticeable diference in the registry between the block chain and non blockchain instalation?

With stack on both block chain and 17.11.4 I get significantly worse hashrate with one of the cards so it's just CAST which works for me..

P00P135

full member

Activity: 1124

Merit: 136

Quote from: nevermind41 on December 10, 2017, 05:55:20 AM

I use windows 8.1 in my rigs with beta blockchain dag fix driver. The official blockchain does not have windows 8.1 support. I tried cast xmr and it says ''blockchain compute driver not detected'' So how can I fix it?

Use windows 10. You can mine on it for free.

borderline

full member

Activity: 798

Merit: 116

only for beta driver? i would to use this miner with rx and vega, but if i need to use beta driver my rx 470 voltage go up and down without reason.. i

nevermind41

full member

Activity: 186

Merit: 100

I use windows 8.1 in my rigs with beta blockchain dag fix driver. The official blockchain does not have windows 8.1 support. I tried cast xmr and it says ''blockchain compute driver not detected'' So how can I fix it?

Souran

jr. member

Activity: 59

Merit: 4

any plan to support the newer AMD Drivers? (need them for 12 gpu rigs on windows)

Currently cant use this miner even though I like it, but other miners do work with similar performance vs blockchain drivers.

underdog13

newbie

Activity: 12

Merit: 0

Quote from: tf2addict on December 09, 2017, 12:38:21 PM

Sometimes Cast freezes during card initialization and I have to restart it, would it possible to add a timeout mechanism (a "watchdog" of sorts) so that if something happens then Cast restarts itself or the card initialization? This could even be optional via the command line.

http://vega.miningguides.com/ at the bottom

anyone ever come up with a fix for all the zeros. Like the miner runs 8x to fast for rx 4 or 5xx series cards? It's not me I tried brand new everything and then ordered vegas and they are good to go. Had some crash and burns UNTIL i used IGPU

I followed guide above as close as possible other than cast

Iron1

newbie

Activity: 5

Merit: 0

Is there any timeline for updating this miner to work with new drivers?

The blockchain drivers are horrid compared newer drivers.

dagarair

sr. member

Activity: 847

Merit: 383

Quote from: duketasos on December 09, 2017, 08:31:19 PM

Quote from: dagarair on December 09, 2017, 09:28:51 AM

Quote from: duketasos on December 09, 2017, 06:15:07 AM

Hello , i think i tired everything... got a biostar tb250 + mobo (8gpu) and installed first 4 vegas. already made the crossfire reg mode, the devcon, pagefile,VM etc etc. when i'm on single vega i can run at 2060h/s when on 2+ pc crashes instantly. i have seen hellae guide on reddit and set clocks at -30% 930 auto -20% . now its stable at 1890 each. got free electricity so i don't care about it. using wattman. anyone has any idea ..?

hbcc off crossfire off and pagefile 45G

alreadu tried these...when 5th card enters the mining game everything crash...everything got recognized but when cast starts boom

Update to win ver 1709 maybe that will help

duketasos

newbie

Activity: 28

Merit: 0

Quote from: dagarair on December 09, 2017, 09:28:51 AM

Quote from: duketasos on December 09, 2017, 06:15:07 AM

Hello , i think i tired everything... got a biostar tb250 + mobo (8gpu) and installed first 4 vegas. already made the crossfire reg mode, the devcon, pagefile,VM etc etc. when i'm on single vega i can run at 2060h/s when on 2+ pc crashes instantly. i have seen hellae guide on reddit and set clocks at -30% 930 auto -20% . now its stable at 1890 each. got free electricity so i don't care about it. using wattman. anyone has any idea ..?

hbcc off crossfire off and pagefile 45G

alreadu tried these...when 5th card enters the mining game everything crash...everything got recognized but when cast starts boom

ronnieb

jr. member

Activity: 199

Merit: 1

support for fury x soon?

tf2addict

full member

Activity: 675

Merit: 100

Quote from: patrike on December 09, 2017, 03:22:16 PM

I've added support for Cast XMR in Awesome Miner, but I've noticed that the mining software isn't closing down properly when you send the close window command to it.

If you manually press Q button, it shut downs in a better manner, but the software needs to response to the close window event as well and terminate in the same nice way. Most other mining software do that and it's the only way of controlling them on a large scale with solid stability.

Please consider this feature request, because your mining software will get more exposure when all users of Awesome Miner get easy access to it. Thanks!

What do you see when that happens? I've noticed many times after restarting Cast that it freezes during GPU initialization.

patrike

legendary

Activity: 3346

Merit: 1094

I've added support for Cast XMR in Awesome Miner, but I've noticed that the mining software isn't closing down properly when you send the close window command to it.

If you manually press Q button, it shut downs in a better manner, but the software needs to response to the close window event as well and terminate in the same nice way. Most other mining software do that and it's the only way of controlling them on a large scale with solid stability.

Please consider this feature request, because your mining software will get more exposure when all users of Awesome Miner get easy access to it. Thanks!

whitrzac

member

Activity: 126

Merit: 10

90*c is good, right?

I'm getting a "clcreatecontext" error when I try to run it.

win10
blockchain driver
1 xfx vega 56

System is my mining test bench and runs claymore XMR miner without issue, eth miner, etc.

Edit: needed to add the --opencl command.

DonGato

copper member

Activity: 63

Merit: 6

Quote from: PONI on December 09, 2017, 02:05:14 PM

I cant make the --help command to work any help is appreciated.

okay i just figured this out minutes ago

make a copy of the start bat file, then edit it Add the "--help" command infront the miner address, i actually deleted everything but the --help command just to see the options
so open run command type "cmd /k" the "/k" prevents auto close
type "cd "folderpathway"" then drag in the edited bat file.

spoilers theres not much to see.

PONI

newbie

Activity: 1

Merit: 0

I cant make the --help command to work any help is appreciated.

Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 108. (Read 206409 times)