[Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 50.

Poseidon_

newbie

Activity: 6

Merit: 0

I put the driver adrenalin 18,3,4 and get it lower hash
With blockchain driver a get 862h with rx580 and now 490h
Vega still not working Sad

With the Vegas after a while disconnecting from pool and reconnect again and again

It's impossible get 1900h/s with criptonight heavy?

Edit:
I'm using xmrig and it gets 1300/1400h/s each Vega 56 without problem and 700h/s with 580!
Sumokoin!!!

cristian13

newbie

Activity: 18

Merit: 1

Yeah, i know the steps, but i am looking for other power play tables because the ones that i used on blockchain drivers, dont work with the latest, i get driver signature issue.

P00P135

full member

Activity: 1124

Merit: 136

Quote from: cristian13 on April 15, 2018, 12:22:07 PM

Hi,
Someone can help with a tip ? I am runing a 6 x Vega64 plus 2 x RX580 8gb rig for about 5 months with blockchain drivers. Now i am trying to mine cryptonight-heavy with latest adrenalin drivers but the issue is that my powerplay tables that i was using on blockchain drivers, dont work now, 3 of my vegas give signature drivers issue (exclamation mark). Can someone share good powerplay tables that were tested with latest adrenalin drivers ?
Thank you

DDU drivers, install new drivers, apply power play tables, use Ntool.

cristian13

newbie

Activity: 18

Merit: 1

Hi,
Someone can help with a tip ? I am runing a 6 x Vega64 plus 2 x RX580 8gb rig for about 5 months with blockchain drivers. Now i am trying to mine cryptonight-heavy with latest adrenalin drivers but the issue is that my powerplay tables that i was using on blockchain drivers, dont work now, 3 of my vegas give signature drivers issue (exclamation mark). Can someone share good powerplay tables that were tested with latest adrenalin drivers ?
Thank you

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: djkice on April 15, 2018, 10:18:31 AM

Quote from: dragonmike on April 15, 2018, 08:44:17 AM

Tbh there is no reason to be using blockchain driver for anything anymore. The latest Adrenalin drivers work with everything perfectly.

simple if stock but for me i use v64 bios and undervolt.

I kinda have a fear of getting the powerplaytables etc applied after updating the drivers. It was extremely painful gettign right for the block chain drviers. should anything not work then it's gonna be a time investment to resolve.

Oh trust me I understand. I've been there.
But I've done the switch and it's working. Also you're able to easier mine anything else now, i.e. not stuck to Cryptonight. I've been mining ETH with Claymore etc.

Basically the latest Adrenalin driver is a "fully functional" version of the blockchain driver! Cheesy

djkice

member

Activity: 99

Merit: 10

Quote from: dragonmike on April 15, 2018, 08:44:17 AM

Tbh there is no reason to be using blockchain driver for anything anymore. The latest Adrenalin drivers work with everything perfectly.

simple if stock but for me i use v64 bios and undervolt.

I kinda have a fear of getting the powerplaytables etc applied after updating the drivers. It was extremely painful gettign right for the block chain drviers. should anything not work then it's gonna be a time investment to resolve.

glph3k

member

Activity: 91

Merit: 29

Hi,

to all who experience low hashrates with CryptoNight-Heavy. If you are using the Blockchain Aug23 beta drivers. it is a known problem.

A fix will be released in the next version.

Regards,
Glph3k

Kicigz

newbie

Activity: 3

Merit: 0

Quote from: glph3k on April 15, 2018, 02:21:35 AM

Quote from: Kicigz on April 14, 2018, 08:34:47 PM

Cryptonight heavy have problem. I am on 6x rigs with rx 470 on every rig gpu 1 have low hash rate ~100 h/s. cryptonight v7 is ok

Hi,

do the cards have 4 or 8 GB? Which driver version? Would recommend 18.3.4. What do you mean exactly with 100 h/s? 100 h/s lower or really just 100 h/s?

Regards,
Glph3k

My card have 4 GB(6 rigs with 6xrx470 and 3 rigs with 8rx580) Blockchain driver from august.On every rig is the same problem with only one-primary card. Hashrate of that card is around 100H/R 60-150 H/R but just primary gpu and thats happend only with Cryptonight heavy. Normaly I just reset miner and clock is ok but with Criptonight heavy allways is the same clock around 100h/s.

almost30

newbie

Activity: 164

Merit: 0

Nicehash supporting cryptonight v7 algo .
what about nano pool guys ? any recommendation of pool ! Huh

Bhaal1

newbie

Activity: 80

Merit: 0

Quote from: dragonmike on April 15, 2018, 08:44:17 AM

Tbh there is no reason to be using blockchain driver for anything anymore. The latest Adrenalin drivers work with everything perfectly.

Yes. Switched a few hours ago and everything is fine. I ended up with the same hashrates (vegas 56).

dragonmike

hero member

Activity: 1274

Merit: 556

Tbh there is no reason to be using blockchain driver for anything anymore. The latest Adrenalin drivers work with everything perfectly.

slapenke

newbie

Activity: 1

Merit: 0

Glph3k is looking into fixing the issues with the blockchain drivers at this right moment

and just to clarify, no, heavy will not work on blockchain drivers (at least with vegas).

djkice

member

Activity: 99

Merit: 10

anyone got cryptonight-h working with blockchain drivers?

abudfv2008

full member

Activity: 728

Merit: 106

Quote from: glph3k on April 15, 2018, 02:21:35 AM

Quote from: Kicigz on April 14, 2018, 08:34:47 PM

Cryptonight heavy have problem. I am on 6x rigs with rx 470 on every rig gpu 1 have low hash rate ~100 h/s. cryptonight v7 is ok

Hi,

do the cards have 4 or 8 GB? Which driver version? Would recommend 18.3.4. What do you mean exactly with 100 h/s? 100 h/s lower or really just 100 h/s?

Regards,
Glph3k

Have the same issue with blockchain drivers. Hasrate starts at ~200h/s and then drops to 100 ... 60.

professorkuusamo

newbie

Activity: 14

Merit: 0

glph3k,when you add aditional list pools?

glph3k

member

Activity: 91

Merit: 29

Quote from: Poseidon_ on April 14, 2018, 08:24:57 PM

Hi, didint work here, I have 4 vega 56 and takes 300h/s each vga with --algo=2 and without that there's lots of errors
I'm using win 10 and blockchain driver 17.30.1029

Hi,

sorry, Heavy was only tested with 18.3.4 drivers. Will check the situation is with the blockchain drivers.

Regards,
Glph3k

glph3k

member

Activity: 91

Merit: 29

Quote from: Kicigz on April 14, 2018, 08:34:47 PM

Cryptonight heavy have problem. I am on 6x rigs with rx 470 on every rig gpu 1 have low hash rate ~100 h/s. cryptonight v7 is ok

Hi,

do the cards have 4 or 8 GB? Which driver version? Would recommend 18.3.4. What do you mean exactly with 100 h/s? 100 h/s lower or really just 100 h/s?

Regards,
Glph3k

glph3k

member

Activity: 91

Merit: 29

Quote from: SigiSinatra on April 14, 2018, 07:51:55 PM

It doesn't work on Heavy vega 56/64
It' starts but than crash or hashdrop to 200 h/s. Even on start can't reach 1340~1400 barely 950 h/s per vega.

Hi,

which driver version are you using? For Heavy would recommend 18.3.4.

Regards,
Glph3k

almost30

newbie

Activity: 164

Merit: 0

hi guys . what is the best pool for cryptonightv7

1980hs on vega56 xfx Grin

Ty dev .

newnonce

newbie

Activity: 6

Merit: 0

Thanks, gandalph! SUMO is working for me:

using pool: mine.sumo.fairpool.cloud:5555

2 RX580
2 RX570
1 Vega56

Hashing is lower as noted due to Heavy Algo

18.3.4 Adrenalin Drivers, x64 Win10, -G 0,1,2,3,4 --algo=2 --forcecompute --fastjobswitch --nonicehash

Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 50. (Read 206404 times)