Author

Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 572. (Read 2347641 times)

legendary
Activity: 1512
Merit: 1000
quarkchain.io
I'm sure once I play around with a few of the settings like -i intensity and -pl 150 I can achieve 310 with the Samsung memory cards and 300+ with the Micron memory cards @ 150w.
What does -pl stands for?

This param sets the power limit...
hero member
Activity: 543
Merit: 500
I'm sure once I play around with a few of the settings like -i intensity and -pl 150 I can achieve 310 with the Samsung memory cards and 300+ with the Micron memory cards @ 150w.
What does -pl stands for?
full member
Activity: 212
Merit: 100
Gigabyte G1 Gaming GTX1070 *6(8pin)
drivers: 372.54
ccminer1.8.0 ~1544M(~257M) temp:59C power:1140W via NVIDIA-SMI (nvidia-smi -ac 4004,1999 & nvidia-smi -pl 190)
SP-MOD#3 ~1800M(~300M) temp:59C power:1090W via NVIDIA-SMI (nvidia-smi -ac 4004,1999 & nvidia-smi -pl 190)

~15% increase

ccminer1.8.1 crashes my system using the same command used below for ccminer 1.8.0 and SP-MOD#3

Command used to achieve the above rates:

ccminer1.8.0 - ccminer-x64.exe -t 6 -a lbry -o stratum+tcp://lbry.pool.mn:8878 -u XXXX -p XXXX --show-diff --cpu-priority 4
SP-MOD#3 - ccminer.exe -t 6 -a lbry -o stratum+tcp://lbry.pool.mn:8878 -u XXXX -p XXXX --show-diff --cpu-priority 4

Not good, one 1070 can do 310mhs easily with 150watt only

Depends on the 1070 as not all were made equal  Wink My Samsung memory G1s are doing 304~306 My Micron memory G1s are doing 295~297

Plus this is my first time using ccminer/nvidia cards and I'm still learning the command interface and nvidia-smi. I'm sure once I play around with a few of the settings like -i intensity and -pl 150 I can achieve 310 with the Samsung memory cards and 300+ with the Micron memory cards @ 150w.

Thanks for your input though  Kiss
member
Activity: 130
Merit: 10
It's all models of the MSI cards. I have gaming, gaming 8g, gaming z 8g. They all have the same problem. It's disgusting as the card is supposed to be pretty robust.

They've been mining mainly Lbry and there are some algos that will use even more power, such as dual mining and neos.

If you're interested, take a smell around the VRMs / Power plug. You can smell the burnt silicon if you aren't around when it dies. I literally saw it eject blue magic smoke out of the side of the card when one died though.

Yeah, these days it's hard to find a vendor which won't make a mistake. I'm sticking to EVGA and Gigabyte, because of their longer warranty.
legendary
Activity: 1764
Merit: 1024
It's all models of the MSI cards. I have gaming, gaming 8g, gaming z 8g. They all have the same problem. It's disgusting as the card is supposed to be pretty robust.

They've been mining mainly Lbry and there are some algos that will use even more power, such as dual mining and neos.

If you're interested, take a smell around the VRMs / Power plug. You can smell the burnt silicon if you aren't around when it dies. I literally saw it eject blue magic smoke out of the side of the card when one died though.
sr. member
Activity: 318
Merit: 250
@
bensam1231

Shame I had one MSI gaming x 1070, runing it 90% powerlimit and 2000Mhz clock it just shut down my pc, looks like too VRM dies...
And i have bunch of Gainward cards working no problems at all

Still waiting on RMA, duno what to tell them, I hope in new revision they fixed the problem, prolly bad parts, because Gaming X had 8pin+6pin in robust VRM

I had one of these MSI 1070's Gaming  do exactly the same.  It has been replaced, no questions.
legendary
Activity: 1510
Merit: 1003
Gigabyte G1 Gaming GTX1070 *6(8pin)
drivers: 372.54
ccminer1.8.0 ~1544M(~257M) temp:59C power:1140W via NVIDIA-SMI (nvidia-smi -ac 4004,1999 & nvidia-smi -pl 190)
SP-MOD#3 ~1800M(~300M) temp:59C power:1090W via NVIDIA-SMI (nvidia-smi -ac 4004,1999 & nvidia-smi -pl 190)

~15% increase

ccminer1.8.1 crashes my system using the same command used below for ccminer 1.8.0 and SP-MOD#3

Command used to achieve the above rates:

ccminer1.8.0 - ccminer-x64.exe -t 6 -a lbry -o stratum+tcp://lbry.pool.mn:8878 -u XXXX -p XXXX --show-diff --cpu-priority 4
SP-MOD#3 - ccminer.exe -t 6 -a lbry -o stratum+tcp://lbry.pool.mn:8878 -u XXXX -p XXXX --show-diff --cpu-priority 4

Not good, one 1070 can do 310mhs easily with 150watt only
full member
Activity: 212
Merit: 100
Gigabyte G1 Gaming GTX1070 *6(8pin)
drivers: 372.54
ccminer1.8.0 ~1544M(~257M) temp:59C power:1140W via NVIDIA-SMI (nvidia-smi -ac 4004,1999 & nvidia-smi -pl 190 / Core +150)
SP-MOD#3 ~1800M(~300M) temp:59C power:1090W via NVIDIA-SMI (nvidia-smi -ac 4004,1999 & nvidia-smi -pl 190 / Core +150)

~15% increase

ccminer1.8.1 crashes my system using the same command used below for ccminer 1.8.0 and SP-MOD#3

Command used to achieve the above rates:

ccminer1.8.0 - ccminer-x64.exe -t 6 -a lbry -o stratum+tcp://lbry.pool.mn:8878 -u XXXX -p XXXX --show-diff --cpu-priority 4
SP-MOD#3 - ccminer.exe -t 6 -a lbry -o stratum+tcp://lbry.pool.mn:8878 -u XXXX -p XXXX --show-diff --cpu-priority 4
legendary
Activity: 1901
Merit: 1024
@
bensam1231

Shame I had one MSI gaming x 1070, runing it 90% powerlimit and 2000Mhz clock it just shut down my pc, looks like too VRM dies...
And i have bunch of Gainward cards working no problems at all

Still waiting on RMA, duno what to tell them, I hope in new revision they fixed the problem, prolly bad parts, because Gaming X had 8pin+6pin in robust VRM
legendary
Activity: 2002
Merit: 1051
ICO? Not even once.
^Sounds like a bad model.

Though I have to say the only reason I went with 1070's instead of 1080's because the Gigabyte 1080's also only have 1 x 8 pin, just like the 1070's and those can already use 190 watts.

I love the Gigabyte OC cards but the power delivery of this series is just awful.
legendary
Activity: 1764
Merit: 1024
Just as a FYI, MSI 1070s suck massive dick. The red cards in particular (various models) I have close a 50% failure rate! Not even joking. The power delivery can't handle it. It's not even fully utilizing the TDP of the card either as they provide up to 126%. Just mining Library like all the other cards.

Tonight I had one of my rigs reset, turned it back on... One of the cards was missing, I tried rebooting it, wouldn't show up, turned it off, tried rebooting it again... a completely different MSI 1070 red blew blue magic smoke from the VRM power area (power plug) and died, not even related to the other red that had failed. Two dead cards on the same night.

Don't touch these cards, they also don't stay as cool as other cards from other manufacturers. For a premium card they sure are chincing on electronics to save money. I'm scared to think what's going to happen when I try mining something else that hits close to max TDP, they're all just going to die at the same time.
legendary
Activity: 1901
Merit: 1024
MSI GTX1070 DUKE*6(8+6pin)
drivers: 368.69
ccminer1.8.1 ~1548M(~258M) temp:78C power:1350W
SP-MOD#3   ~1680M(~280M) temp:70C power:1270W
It is huge consumption either way. In my case ccminer1.8.1 6*1070(8pin) ~980W at wall, 1578Mh/s

I agree for me is 1300mhs 5x 1070 with <750w from wall, power limit is 85... Gainward phoenix 1x8pin
hero member
Activity: 543
Merit: 500
MSI GTX1070 DUKE*6(8+6pin)
drivers: 368.69
ccminer1.8.1 ~1548M(~258M) temp:78C power:1350W
SP-MOD#3   ~1680M(~280M) temp:70C power:1270W
It is huge consumption either way. In my case ccminer1.8.1 6*1070(8pin) ~980W at wall, 1578Mh/s
sr. member
Activity: 445
Merit: 255
LBRY sp-mod #3

MSI GTX1070 DUKE*6(8+6pin)
drivers: 368.69
ccminer1.8.1 ~1548M(~258M) temp:78C power:1350W
SP-MOD#3   ~1680M(~280M) temp:70C power:1270W

Thanks for testing. Less power less heat more hash...

Hi sp. You've received 2 emails. Thanks.
sp_
legendary
Activity: 2954
Merit: 1087
Team Black developer
LBRY sp-mod #3

MSI GTX1070 DUKE*6(8+6pin)
drivers: 368.69
ccminer1.8.1 ~1548M(~258M) temp:78C power:1350W
SP-MOD#3   ~1680M(~280M) temp:70C power:1270W

Thanks for testing. Less power less heat more hash...
legendary
Activity: 1176
Merit: 1015
LBRY difficulty has risen from 1.8 THASH to 2.6THASH...


Somebody might have got dual mining to work correctly

Claymore dual miner works properly, it's just more profitable for Nvidia to mine with a pure Lbry miner and AMD to mine ETH+SIA.


lol... The rise in network difficulty for Lbry completely negated the pump. Lbry is actually earning less now then pre-pump... by a decent amount.

So how long to roi?

You can always sell those to gamers?

BFX bot runs out of ammo at some point. Just like willy did.

legendary
Activity: 1764
Merit: 1024
LBRY difficulty has risen from 1.8 THASH to 2.6THASH...


Somebody might have got dual mining to work correctly

Claymore dual miner works properly, it's just more profitable for Nvidia to mine with a pure Lbry miner and AMD to mine ETH+SIA.


lol... The rise in network difficulty for Lbry completely negated the pump. Lbry is actually earning less now then pre-pump... by a decent amount.
legendary
Activity: 3248
Merit: 1072
LBRY difficulty has risen from 1.8 THASH to 2.6THASH...


yes but the reward is higher, yiimp is on a bad streak for sure, coinmine i'm receiving always the same revenue
member
Activity: 72
Merit: 10
LBRY difficulty has risen from 1.8 THASH to 2.6THASH...


Somebody might have got dual mining to work correctly
sr. member
Activity: 574
Merit: 250
Fighting mob law and inquisition in this forum
Time to switch back to good old Folding@Home and FLDC :-D with 1000000 points you can do a little.
Jump to: