100 days to ROI 0.1btc donation ))))))))))))))))))))))))))))))))))))
Or 10 days if you have 10 cards. or 1 day if you have 100 cards.
Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 585. (Read 2347677 times)
Or 10 days if you have 10 cards. or 1 day if you have 100 cards.
1 GHASH of LBRY is currently paying 0.02085BTC
1 980ti can do 300MHASH with my mod. 0.3*0.02085 = 0,006255BTC = $3.787 - 3.3%= $3.66
1 980ti can do 230MHASH with the opensource 0.25*0.02085 = 0,0052125BTC = $3.148355
Increased Profit per card per day:
+$0,513674
100 days to ROI 0.1btc donation )))))))))))))))))))))))))))))))))))) 1 980ti can do 300MHASH with my mod. 0.3*0.02085 = 0,006255BTC = $3.787 - 3.3%= $3.66
1 980ti can do 230MHASH with the opensource 0.25*0.02085 = 0,0052125BTC = $3.148355
Increased Profit per card per day:
+$0,513674
1 GHASH of LBRY is currently paying 0.02085BTC
1 980ti can do 300MHASH with my mod. 0.3*0.02085 = 0,006255BTC = $3.787 - 3.3%= $3.66
1 980ti can do 230MHASH with the opensource 0.25*0.02085 = 0,0052125BTC = $3.148355
Increased Profit per card per day:
+$0,513674
1 980ti can do 300MHASH with my mod. 0.3*0.02085 = 0,006255BTC = $3.787 - 3.3%= $3.66
1 980ti can do 230MHASH with the opensource 0.25*0.02085 = 0,0052125BTC = $3.148355
Increased Profit per card per day:
+$0,513674
yes. A 0.1 BTC donation will include updates.
No mining for you just the .1btc I still haven't mined with the 2nd 970gtx its just sitting on the rig... bad card clocks at 1423core should be 1178core.
So im moving back wards.
What happened to 2 beers?
And the $300 i donated in the past yrs.
yes. A 0.1 BTC donation includes updates.
Release #3 has a 4minute mining to me, and 116 minutes for you. every 2 hours (-3.3%)
I am working on more speed on the pascal. With proper config and oc my private kernal is around 15% on the pascal as well. (around 6% on default clocks). With oc the 980ti can be up to 33% faster than the opensource.
33% - 3.3% is almost +30% boost.
And you want .1 btc too?I am working on more speed on the pascal. With proper config and oc my private kernal is around 15% on the pascal as well. (around 6% on default clocks). With oc the 980ti can be up to 33% faster than the opensource.
33% - 3.3% is almost +30% boost.
My one rig would crash on the change over.
Release #3 has a 4minute mining to me, and 116 minutes for you. every 2 hours (-3.3%)
I am working on more speed on the pascal. With proper config and oc my private kernal is around 15% on the pascal as well. (around 6% on default clocks). With oc the 980ti can be up to 33% faster than the opensource.
33% - 3.3% is almost +30% boost.
I am working on more speed on the pascal. With proper config and oc my private kernal is around 15% on the pascal as well. (around 6% on default clocks). With oc the 980ti can be up to 33% faster than the opensource.
33% - 3.3% is almost +30% boost.
LBRY sp-mod #3 is sendt to the donators.
This time some real Pascal improvements in the hashrate.
Faster compute 5.0 +5-7% (750,750ti,960m)
Faster compute 5.2 +10-25% (950,960,980,980ti,titanx)
Faster compute 6.1 +5-7% (1060?,1070,1080?)
-Improved pool switching. All users should upgrade.
-Fixed the dual switch
-Fixed some bugs.
Is that without taking my hash and no oc'ing sp? This time some real Pascal improvements in the hashrate.
Faster compute 5.0 +5-7% (750,750ti,960m)
Faster compute 5.2 +10-25% (950,960,980,980ti,titanx)
Faster compute 6.1 +5-7% (1060?,1070,1080?)
-Improved pool switching. All users should upgrade.
-Fixed the dual switch
-Fixed some bugs.
What is your 980ti doing with the opensource kernel?
I get a boost 0f 20-25% on my gtx 970 and 980ti cards. with sp-mod #3 compared to v 1.8.1
I get a boost 0f 20-25% on my gtx 970 and 980ti cards. with sp-mod #3 compared to v 1.8.1
Which settinngs here , mate ?
Tdp as high as it goes, in this case 120%=196w
Memory as low as it goes
Core 1600+
But it is much better to limit power to 60-80% and still have speeds 150MH+
Just installed it now , yes there is significant boost on Maxwells
980 - 225 MH
980ti - 285MH
970 Palit JS - 189MH
970 Palit Ref. - 170-175MH
Which settinngs here , mate ?
Tdp as high as it goes, in this case 120%=196w
Memory as low as it goes
Core 1600+
But it is much better to limit power to 60-80% and still have speeds 150MH+
#3
Sp-mod #3
Just did some test with sp_mod#3. Th intensity 29 might work on a single card working, but if you have full 6-card rig thing don't work well. Lowering the intensity is giving me between 300 - 303 MH @2114MHz core with my PALIT 1070 SJS. The Motherboard is powered with 2 molex from a single cable. The PSU is OCed on single rail (model is BeQuiet 1200 Platinum http://www.bequiet.com/en/powersupply/477 ).
Basically I'm getting around 285 MH stable with that config , with Epsylon's open source 181.
Memory is lowered to 3299MHz on both of the miners...
I don't have watt - meter to report the consumption though...
..So we are not close to these 12% upFront we were talking about...
Basically I'm getting around 285 MH stable with that config , with Epsylon's open source 181.
Memory is lowered to 3299MHz on both of the miners...
I don't have watt - meter to report the consumption though...
..So we are not close to these 12% upFront we were talking about...
indeed, all nvidia devs are against your methods now... violating GPL etc
You may have noticed i reduced the direct commits recently... soon there will be no more at all from me.
You are just killing the community, or should i say.. just defecate on your future possible incomes.
You may have noticed i reduced the direct commits recently... soon there will be no more at all from me.
You are just killing the community, or should i say.. just defecate on your future possible incomes.
I think I should quit my job as a kernel developer and troll the forums full time. I've picked some nice techniques to do human programming. Keep trolling my thread xxxheads.
1. You should stop using opensource code, change some parts and try to sell it. It violates all licences and rules of etiquette
2. Since you stopped publishing your optimization techniques opensource there is no reason for nvidia mining community to support you.
3. You become just a greedy asshole ))
what i mean is, that he is not redoing the code, but just tweaking intensity, for paying fee plus donation i was expecting a code redo to boost pascal
it does not amtter how many you have, you just need one to test, and my g1 gaming 1070 can easily do 276, i can post a screen if you want
so saying that 265 is the base value is plain wrong
..
and i'm not even using your core
Yeah, statistics doesen't matter. I've got 30 of them and you know more than any other, with just one model.
Keep dreaming, amph
i don't care if you have 30 or 100, that's not the point, the point is that i can do 283 with the right intensity, so saying that the right value from which you add 15% is 265, is stupid
and 283 + 15% is basically 300 like i've said, which is exactly what sp is getting , just look above...
it does not amtter how many you have, you just need one to test, and my g1 gaming 1070 can easily do 276, i can post a screen if you want
so saying that 265 is the base value is plain wrong
..
and i'm not even using your core
Yeah, statistics doesen't matter. I've got 30 of them and you know more than any other, with just one model.
Keep dreaming, amph
i don't care if you have 30 or 100, that's not the point, the point is that i can do 283 with the right intensity, so saying that the right value from which you add 15% is 265, is stupid
and 283 + 15% is basically 300 like i've said, which is exactly what sp is getting , just look above...
there is no secret, he uses a single kernel, so no memory is required. But doesnt works well with all kind of cards
Sp-mod LBRY #3 on a gtx 1070 with -i 29
Messured with a meter to 147Watt in the wall. (inno3d gtx 1070) default 150w tdp
Messured with a meter to 147Watt in the wall. (inno3d gtx 1070) default 150w tdp
sp are you simply modifying how the intensity work? on the epsylon version you can go as a high as 25 which give you 283, with your 29
so that is your little secret?
Jump to: