Author

Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 680. (Read 2347677 times)

legendary
Activity: 3164
Merit: 1003


he Quark and Qubit crypto algorithms continue to be quite profitable, but until recently these algorithms were mostly in the Nvidia domain as the ccMiner for Nvidia GPUs was faster than the available performance on AMD hardware. There is however a new sgminer fork with compiled Quark and Qubit kernels that was sent to us that brings up the hashrate significantly on Pitcairn and Tahiti AMD GPUs. We have tested this particular sgminer on a Radeon R9 280X and we are getting about 11.22 MHS on Quark with a non overclocked GPU and about 12.3 MHS on Qubit and you can get higher with OC and increase in the Intensity. Quark is apparently quite profitable at the moment on NiceHash and WestHash due to the interest in SharkCoin or so it seems, so if you have some idle AMD GPUs that you are wondering where to point them there. Do note that the sgminer is not compiled by us and it comes with the standard OpenCL kernel files, so you need to use the binaries for the higher performance. Since we have not compiled this sgminer from source and it was sent to us already compiled we would recommend to be cautions and not run it on systems with wallets installed, just in case!  ....nvidia rekt  .....
http://cryptomining-blog.com/4819-new-sgminer-with-optimized-quark-and-qubit-kernels/
At nicehash about 1/2 year ago SHARK coin was paying about .9000 btc per gh.
You can imagine the payout. Cheesy
legendary
Activity: 3164
Merit: 1003
there is a way to change back the p state from 0 to 2 without using nvidia inspector? with command prompt for example?
I found   --pstate=0  to set clocks to the p0 state.....but I haven't tried it yet.

If there is that  --pstate=0 then maybe there is   --pstate=2 which is what my 980ti and 970gtx are running at right now.
Remember I found this on the readme docs and I haven't tried it yet. Wink

EDIT:Also   --keep-clocks   prevents clocks from resetting.

use ths command nvidia-smi -rac

I'm familiar with nvidia-smi   ........  but  -rac  what is that? What does it do?
Thx
sr. member
Activity: 299
Merit: 250
SP!
My report:
Private#5 VS Private #6
Cards 960 and 970 NON OC STANDART CLOCK:
legendary
Activity: 3248
Merit: 1072
i have yet to receive anything also sp ...
same as usual? ... just email me and ill do the rest from there ...
#crysx
No linux version. Do you still want the windows exe?
no linux version? ...
so what happened with the linux version? ...

There has never been a linux version of the x11 series/lyra2v2 and quark and you know it.
I am working on the sp-mod ultimate, and I might build a linux version when it's done. If you see my opensource I have added some optimalizations to the code, so I had to give something to the donators.  The difference between the sp-mod private and the opensource is just a few percent. And the opensource is getting faster and faster..

for quark release 80 versus 79 seems 1% faster at least for me
legendary
Activity: 1050
Merit: 1000


he Quark and Qubit crypto algorithms continue to be quite profitable, but until recently these algorithms were mostly in the Nvidia domain as the ccMiner for Nvidia GPUs was faster than the available performance on AMD hardware. There is however a new sgminer fork with compiled Quark and Qubit kernels that was sent to us that brings up the hashrate significantly on Pitcairn and Tahiti AMD GPUs. We have tested this particular sgminer on a Radeon R9 280X and we are getting about 11.22 MHS on Quark with a non overclocked GPU and about 12.3 MHS on Qubit and you can get higher with OC and increase in the Intensity. Quark is apparently quite profitable at the moment on NiceHash and WestHash due to the interest in SharkCoin or so it seems, so if you have some idle AMD GPUs that you are wondering where to point them there. Do note that the sgminer is not compiled by us and it comes with the standard OpenCL kernel files, so you need to use the binaries for the higher performance. Since we have not compiled this sgminer from source and it was sent to us already compiled we would recommend to be cautions and not run it on systems with wallets installed, just in case!  ....nvidia rekt  .....
http://cryptomining-blog.com/4819-new-sgminer-with-optimized-quark-and-qubit-kernels/
legendary
Activity: 3248
Merit: 1072
there is a way to change back the p state from 0 to 2 without using nvidia inspector? with command prompt for example?
I found   --pstate=0  to set clocks to the p0 state.....but I haven't tried it yet.

If there is that  --pstate=0 then maybe there is   --pstate=2 which is what my 980ti and 970gtx are running at right now.
Remember I found this on the readme docs and I haven't tried it yet. Wink

EDIT:Also   --keep-clocks   prevents clocks from resetting.

use ths command nvidia-smi -rac
sr. member
Activity: 330
Merit: 252
ofcourse. Why don't you test the speed of the Putin miner (keccak):

https://github.com/alexis78/ccminer

Fxxxing slow. Poor programming..

sp_ http://www.aa.org/ ...they will help you.
sr. member
Activity: 364
Merit: 260
--- ChainWorks Industries ---
i have yet to receive anything also sp ...
same as usual? ... just email me and ill do the rest from there ...
#crysx
No linux version. Do you still want the windows exe?
no linux version? ...
so what happened with the linux version? ...

There has never been a linux version of the x11 series/lyra2v2 and quark and you know it.
I am working on the sp-mod ultimate, and I might build a linux version when it's done. If you see my opensource I have added some optimalizations to the code, so I had to give something to the donators.  The difference between the sp-mod private and the opensource is just a few percent. And the opensource is getting faster and faster..

ok sp ...

i know what needs to be done ...

tanx ...

btw - the opensource IS faster - you are right ... only by a small fraction - but it is faster ...

ill always be upset by the fact there is no linux version ... especially now that ive begun the worlds first grid mining system ( and when i get an inhouse dev - we will also have the first hpc miner for thegrid / thefarm also ) ...

pity - i believed from the conversations you were going to release one ...

btw - yes - i would like the windows version to test ...

tanx ...

#crysx
legendary
Activity: 3164
Merit: 1003
there is a way to change back the p state from 0 to 2 without using nvidia inspector? with command prompt for example?
I found   --pstate=0  to set clocks to the p0 state.....but I haven't tried it yet.

If there is that  --pstate=0 then maybe there is   --pstate=2 which is what my 980ti and 970gtx are running at right now.
Remember I found this on the readme docs and I haven't tried it yet. Wink

EDIT:Also   --keep-clocks   prevents clocks from resetting.
sp_
legendary
Activity: 2954
Merit: 1087
Team Black developer
The older releases of yours (r6x) are doing keccak very close to 500 Mh/s with some OC. It's just got slowed down for some reason in newer releases but nobody noticed it.

ofcourse. Why don't you test the speed of the Putin miner (keccak):

https://github.com/alexis78/ccminer
legendary
Activity: 2002
Merit: 1051
ICO? Not even once.
SP-MOD private #6:
Keccak: The gtx gigabyte gforce 970 is getting 470MHASH on the gb g1 gaming on standard clocks.
Release 79 opensource  is only doing around 380.

So why do I spend time to optimize keccak.. The answer is Etherum dual mining..

Happy hashing.


The older releases of yours (r6x) are doing keccak very close to 500 Mh/s with some OC. It's just got slowed down for some reason in newer releases but nobody noticed it.
sp_
legendary
Activity: 2954
Merit: 1087
Team Black developer
SP-MOD private #6:
Keccak: The gtx gigabyte gforce 970 is getting 470MHASH on the gb g1 gaming on standard clocks.
Release 79 opensource  is only doing around 380.

So why do I spend time to optimize keccak.. The answer is Etherum dual mining..

Happy hashing.
legendary
Activity: 1504
Merit: 1002
Sp-mod #6 is ready to send.

This build is tweaked for the 750ti, and might run slower than #5 on compute 5.2 and up

Hashrates (asus strix 750ti 1275-1290 boostclock) (KHASH/s) (default intensities).


Differences from sp-mod #5:

keccak: 163200(142770) +14.3%
skein: 85400 (new)
nist5: 9620(9500) +1.2%
quark: 6322 (6300) +0.3%
lyra2v2: 4640(4610) +0.65%
x11: 3062(3017) +1.5%
x13: 2340 (2376)
x14: 2280 (new)
x15: 2010 (2045)
lyra2: 1072

Edit: The windows exe file have been sendt.
Edit2: x13 and x15 seems to be slower.


@SP - I didn't receive the release.  Please forward to my email address used previously.  Thanks - pokeytex

I see you have the penta, spreadcoin and decred+vanilla. but not the all nicehashalgos optimized? I will give you a nice discount on the sp-mod ultimate when it is ready.


Ah - ok  - my confusion.  Sorry.
sp_
legendary
Activity: 2954
Merit: 1087
Team Black developer
i have yet to receive anything also sp ...
same as usual? ... just email me and ill do the rest from there ...
#crysx
No linux version. Do you still want the windows exe?
no linux version? ...
so what happened with the linux version? ...

There has never been a linux version of the x11 series/lyra2v2 and quark and you know it.
I am working on the sp-mod ultimate, and I might build a linux version when it's done. If you see my opensource I have added some optimalizations to the code, so I had to give something to the donators.  The difference between the sp-mod private and the opensource is just a few percent. And the opensource is getting faster and faster..
sr. member
Activity: 248
Merit: 250
I copied the latest DJM34 neoscrypt kernal to my github (1.5.80+), but I think I need to rollback. On the gtx 960 the hashrate has dropped from 360 to 80 (!). On the 750ti no change. my asus strix is doing 185KHASH. Pretty weak, when my gainward is close to 220.
Hi  sp i told 2-3 times, Neoscyprt  180-200 on my 750 ti's also in sp private 5. didn't tried sp 6 yet ,we 'll see...
sr. member
Activity: 364
Merit: 260
--- ChainWorks Industries ---
i have yet to receive anything also sp ...

same as usual? ... just email me and ill do the rest from there ...

#crysx

No linux version. Do you still want the windows exe?

no linux version? ...

so what happened with the linux version? ...

ive donated more than most here - and you are telling me that the updates you have no longer apply to me as well - because its windows based only? ...

and what of the donated btc for the linux versions? ... where did all that go mate? ... want to add up all the btc donated by me - as well as the favours / testing - and then tell me there is no linux version? ...

not good mate ... you are not holding true to your commitment - and im getting pretty upset with it sp ...

you KNOW damn well i dont use the windows version - even though im entitled to receive it ... so yes - i would still like the windows version - but i would also like it that you adhere to the committment that you made for future linux development for the ultimate miner ...

ive put in well in excess btc than what was necessary - and this is the reward that you pay me with - including my honesty with keeping kernels closed and private ...

i still have my commitment holding true - and would like you to be the gentleman that you make yourself out to be - and do the same ... otherwsie - all we have dealt with becomes null and void - as any contract would be - when you dont hold up your side of the deal made ...

and you know FULL WELL that i dont deal with windows software - which is why i made the deal in the first place with you for the linux code / kernels ...

if you dont fulfill your part of the deal - ill no longer hold my end ... and will make sure i never deal with you again with regards to 'helping' you in any way shape or form ...

damned disgusting that you can TELL me there is no linux version AND whether i still want the windows version! ...

think about what you are doing now sp - as i am not impressed with it - nor are many others ... as you seem to FORGET - that it i US the community of people that support what you have done ...

if you continue to tell me there is no linux version i can compile - then you have LOST my commitment to you - and our deal ... which renders any deals we had in the past - dissolved ...

#crysx
sp_
legendary
Activity: 2954
Merit: 1087
Team Black developer
I copied the latest DJM34 neoscrypt kernal to my github (1.5.80+), but I think I need to rollback. On the gtx 960 the hashrate has dropped from 360 to 80 (!). On the 750ti no change. my asus strix is doing 185KHASH. Pretty weak, when my gainward is close to 220.
sp_
legendary
Activity: 2954
Merit: 1087
Team Black developer
i have yet to receive anything also sp ...

same as usual? ... just email me and ill do the rest from there ...

#crysx

No linux version. Do you still want the windows exe?
sp_
legendary
Activity: 2954
Merit: 1087
Team Black developer
Sp-mod #6 is ready to send.

This build is tweaked for the 750ti, and might run slower than #5 on compute 5.2 and up

Hashrates (asus strix 750ti 1275-1290 boostclock) (KHASH/s) (default intensities).


Differences from sp-mod #5:

keccak: 163200(142770) +14.3%
skein: 85400 (new)
nist5: 9620(9500) +1.2%
quark: 6322 (6300) +0.3%
lyra2v2: 4640(4610) +0.65%
x11: 3062(3017) +1.5%
x13: 2340 (2376)
x14: 2280 (new)
x15: 2010 (2045)
lyra2: 1072

Edit: The windows exe file have been sendt.
Edit2: x13 and x15 seems to be slower.


@SP - I didn't receive the release.  Please forward to my email address used previously.  Thanks - pokeytex

I see you have the penta, spreadcoin and decred+vanilla. but not the all nicehashalgos optimized? I will give you a nice discount on the sp-mod ultimate when it is ready.
sr. member
Activity: 364
Merit: 260
--- ChainWorks Industries ---
Sp-mod #6 is ready to send.

This build is tweaked for the 750ti, and might run slower than #5 on compute 5.2 and up

Hashrates (asus strix 750ti 1275-1290 boostclock) (KHASH/s) (default intensities).


Differences from sp-mod #5:

keccak: 163200(142770) +14.3%
skein: 85400 (new)
nist5: 9620(9500) +1.2%
quark: 6322 (6300) +0.3%
lyra2v2: 4640(4610) +0.65%
x11: 3062(3017) +1.5%
x13: 2340 (2376)
x14: 2280 (new)
x15: 2010 (2045)
lyra2: 1072

Edit: The windows exe file have been sendt.
Edit2: x13 and x15 seems to be slower.


@SP - I didn't receive the release.  Please forward to my email address used previously.  Thanks - pokeytex

i have yet to receive anything also sp ...

same as usual? ... just email me and ill do the rest from there ...

#crysx
Jump to: