Pages:
Author

Topic: citb0in Solo-Mining Group - BLOCK SOLVERS (english) (Read 3808 times)

hero member
Activity: 630
Merit: 649
Bitcoin g33k
As suggested and agreed in the German citb0in Block Solvers thread, we have decided to combine our stakes from rounds #017, #018 and #019 so that we can launch #017. I myself have also taken the remaining three slots of round #017 to fill it up and make it ready to go. As soon as the coins have arrived, I will launch run #017...  Smiley
legendary
Activity: 2814
Merit: 1091
--- ChainWorks Industries ---
See post #2, MEGArun with 100 PH/s already passed.

I See ...

O Well - I guess You can't win them all Smiley

#crysx #cwi
hero member
Activity: 630
Merit: 649
Bitcoin g33k
Is there anyone interested in participating in pending run #017 ?

I realize it's frustrating not to have landed a block hit, I feel the same way. But if you don't try, you can't win. Every participation in a new run brings new chances, to be precise, even every single hash attempt is a chance to crack the magic block. Completely independent of what the past has looked like. Every single hash attempt is a lottery ticket.

The stake of the standard rounds is a mere 0.001 BTC, which is really a piece of cake and feasible for everyone. The maximum number of participants per round is limited to 10. This guarantees a high payout per participant in the event of a block discovery, i.e. around 0.6 BTC which corresponds to approx. 16,000 EUR (~ 17,600 USD).

Please give me feedback if there is still interest in general, if you have change requests or if there is no interest at all. In case of latter, if there is no more interest in general, I would refund the users @mondayshot and @kkmonde the already paid participation amounts for rounds #017, #018 and #019 and shut-down this project.

Thank you very much in advance and good luck and success to all solo miners!
citb0in
hero member
Activity: 630
Merit: 649
Bitcoin g33k
See post #2, MEGArun with 100 PH/s already passed.
legendary
Activity: 2814
Merit: 1091
--- ChainWorks Industries ---
I filled the last slot of MEGArun #020 , so we are ready to launch. Ok guys, do you have any special request for a specific start time? I would otherwise start the MEGArun #020 with 100 PH/s at Friday, 09th June about 04PM (UTC), as long as there are no objections.

Glad to see You still going ...

I MUST Apologize for the last request with You Mate. I got so inundated with our MasterCoin Coin finishing and the Pool and Release that I had no time for anything else.

So are You all full for the big 100PH - or is there positions left?

#crysx #cwi
hero member
Activity: 630
Merit: 649
Bitcoin g33k
Let's go for run #017 guys ... take your seats  Smiley
hero member
Activity: 630
Merit: 649
Bitcoin g33k
Cadets, buckle up ...
the rocket is launched and hopefully successfully carries the 100 PH/s hashrate into the universe.
May the force be with us and hopefully we crack a block (gladly more).



good luck to us  Wink Smiley



*sniff*  Cry Cry  unfortunately we did not hit a block, we had no luck. The best share remained at 862.34 G.
newbie
Activity: 29
Merit: 3
ready to go!
hero member
Activity: 630
Merit: 649
Bitcoin g33k
I filled the last slot of MEGArun #020 , so we are ready to launch. Ok guys, do you have any special request for a specific start time? I would otherwise start the MEGArun #020 with 100 PH/s at Friday, 09th June about 04PM (UTC), as long as there are no objections.
hero member
Activity: 630
Merit: 649
Bitcoin g33k
www.miningrigrentals.com



There's only one slot left for MEGArun #020 so hopefully we can start soon...  Cool Smiley Tongue
jr. member
Activity: 70
Merit: 6
Hello @thepeterson,

according to todays market place and current rates at MRR (where we rent hash rate) the 0.07 BTC suffice for 3h50min. Looking forward to your stake and hopefully we can start soon and smash some block(s)  Cool
do you pay 5 bitcoin for 1ehs?
hero member
Activity: 630
Merit: 649
Bitcoin g33k
Hello @thepeterson,

according to todays market place and current rates at MRR (where we rent hash rate) the 0.07 BTC suffice for 3h50min. Looking forward to your stake and hopefully we can start soon and smash some block(s)  Cool
jr. member
Activity: 70
Merit: 6
based on my calculations 0.07 should have 6 hours of 100 ph why only 3 hours?
hero member
Activity: 630
Merit: 649
Bitcoin g33k
You've been registered, thank you.

There are 2 slots left for the MEGArun #020 ... so can not take long and hopefully we crack one or more blocks with that 100 PH/s MEGArun Tongue
newbie
Activity: 72
Merit: 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Name: yoshimitsu777
My stake: 0.007 for run 20
My TXID: 8e6e504833f29142b926558ac6e098212356d341f45996bf22de553456169f2f
My payout address: bc1qana6786aa038zcct3w0uasr2qt4l07xs6re7fx
My vote for hash rate: 100 P
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hero member
Activity: 630
Merit: 649
Bitcoin g33k
let's go solo miners out there, where are you? there are 3 spots left for the massive MEGArun #020. The fees in every single newly mined block have been very high for weeks, which means that when we find a block we are not only happy about the block reward but also about additional 0.6 to 0.9 BTC. And if we are lucky enough with the monstrous 100 PH/s we might even find two (or three?) blocks within the run time, who knows ..

The stake is only 0.007 BTC that should be manageable for everyone. The possible profit per participant and per block about 0.67 BTC Wink let's crack this damn block(s)
jr. member
Activity: 85
Merit: 1
can someone explain the difference between the first set of metrics and the second?
Hi TIRMINE,

Currently, at the time of writing the status board of our mining process on soloCK pool looks like that:

Quote
{
 "hashrate1m": "5.06P",
 "hashrate5m": "5.29P",
 "hashrate1hr": "5.51P",
 "hashrate1d": "1.47P",
 "hashrate7d": "592T",
 "lastshare": 1684734406,
 "workers": 6,
 "shares": 907326497200,
 "bestshare": 430834785657.0473,
 "bestever": 2524747400019,
 "worker": [
  {
   "workername": "1BTC4ALL6a2K1d4Ac4JjNJX7pgfRaaaZNd.5PH-11h",
   "hashrate1m": "5.06P",
   "hashrate5m": "5.29P",
   "hashrate1hr": "5.51P",
   "hashrate1d": "1.46P",
   "hashrate7d": "241T",
   "lastshare": 1684734406,
   "shares": 34811047400,
   "bestshare": 12115865440.56623,
   "bestever": 12115865440
  }
 ]
}

What you need to focus on is the second block with the workername .5PH-11h as the suffix:
Quote
  "bestshare": 12115865440.56623,
This equals to 12.1 G

When we're finished, the second block will remain a few days (maybe 7 or 14 days, I am not sure...) in that status page, I guess for about 7 or 14 days or something like that... What gets never removed however is the value "bestever:" at the first block. This indicates the best share that ever achieved using that BTC address for mining. This was 2,5 T and was a very high and nice share.

So just focus on the second block, "bestshare:" line and pray for a number higher than 49549703178592.7 Wink

Hope this helps.
citb0in

EDIT: Our best share climbed to 14.97 G as of the time of finishing this post Cheesy

EDIT: Run #016 was finished with a best share of only 14.97 G, too bad. Let's go to the next round #017 or to the soon filled MEGArun #020 on which probably most will look forward to because it will run with gigantic 100 PH/s. Hopefully with this monstrous hash rate finally the block will fall Wink Still need 3 members to launch the MEGArun #020 , let's CRACK THIS BLOCK guys

got it.  thanks!
hero member
Activity: 630
Merit: 649
Bitcoin g33k
can someone explain the difference between the first set of metrics and the second?
Hi TIRMINE,

Currently, at the time of writing the status board of our mining process on soloCK pool looks like that:

Quote
{
 "hashrate1m": "5.06P",
 "hashrate5m": "5.29P",
 "hashrate1hr": "5.51P",
 "hashrate1d": "1.47P",
 "hashrate7d": "592T",
 "lastshare": 1684734406,
 "workers": 6,
 "shares": 907326497200,
 "bestshare": 430834785657.0473,
 "bestever": 2524747400019,
 "worker": [
  {
   "workername": "1BTC4ALL6a2K1d4Ac4JjNJX7pgfRaaaZNd.5PH-11h",
   "hashrate1m": "5.06P",
   "hashrate5m": "5.29P",
   "hashrate1hr": "5.51P",
   "hashrate1d": "1.46P",
   "hashrate7d": "241T",
   "lastshare": 1684734406,
   "shares": 34811047400,
   "bestshare": 12115865440.56623,
   "bestever": 12115865440
  }
 ]
}

What you need to focus on is the second block with the workername .5PH-11h as the suffix:
Quote
  "bestshare": 12115865440.56623,
This equals to 12.1 G

When we're finished, the second block will remain a few days (maybe 7 or 14 days, I am not sure...) in that status page, I guess for about 7 or 14 days or something like that... What gets never removed however is the value "bestever:" at the first block. This indicates the best share that ever achieved using that BTC address for mining. This was 2,5 T and was a very high and nice share.

So just focus on the second block, "bestshare:" line and pray for a number higher than 49549703178592.7 Wink

Hope this helps.
citb0in

EDIT: Our best share climbed to 14.97 G as of the time of finishing this post Cheesy

EDIT: Run #016 was finished with a best share of only 14.97 G, too bad. Let's go to the next round #017 or to the soon filled MEGArun #020 on which probably most will look forward to because it will run with gigantic 100 PH/s. Hopefully with this monstrous hash rate finally the block will fall Wink Still need 3 members to launch the MEGArun #020 , let's CRACK THIS BLOCK guys
newbie
Activity: 29
Merit: 3
Nice!

Ok guys, we launched run #016 and it'll run about 11 hours. Let's cross the fingers  Roll Eyes GOOD LUCK TO ALL  Tongue Wink Smiley

can someone explain the difference between the first set of metrics and the second?

 "hashrate1m": "2.64P",
 "hashrate5m": "2.89P",
 "hashrate1hr": "3.6P",
 "hashrate1d": "329T",
 "hashrate7d": "413T",
 "lastshare": 1684710340,
 "workers": 6,
 "shares": 879336856264,
 "bestshare": 430834785657.0473,
 "bestever": 2524747400019,
 "worker": [
  {
   "workername": "1BTC4ALL6a2K1d4Ac4JjNJX7pgfRaaaZNd.5PH-11h",
   "hashrate1m": "2.64P",
   "hashrate5m": "2.89P",
   "hashrate1hr": "3.6P",
   "hashrate1d": "326T",
   "hashrate7d": "48.2T",
   "lastshare": 1684710340,
   "shares": 6821406464,
   "bestshare": 8292423213.317903,
   "bestever": 8292423213
  }
 ]

I think the top part is his wallet address (so all time of all of the runs combined).  The bottom set of numbers is just this run (this worker name only).  So what to look for is the bottom best share, needs to be 40+T or whatever the difficulty is.
jr. member
Activity: 85
Merit: 1
Nice!

Ok guys, we launched run #016 and it'll run about 11 hours. Let's cross the fingers  Roll Eyes GOOD LUCK TO ALL  Tongue Wink Smiley

can someone explain the difference between the first set of metrics and the second?

 "hashrate1m": "2.64P",
 "hashrate5m": "2.89P",
 "hashrate1hr": "3.6P",
 "hashrate1d": "329T",
 "hashrate7d": "413T",
 "lastshare": 1684710340,
 "workers": 6,
 "shares": 879336856264,
 "bestshare": 430834785657.0473,
 "bestever": 2524747400019,
 "worker": [
  {
   "workername": "1BTC4ALL6a2K1d4Ac4JjNJX7pgfRaaaZNd.5PH-11h",
   "hashrate1m": "2.64P",
   "hashrate5m": "2.89P",
   "hashrate1hr": "3.6P",
   "hashrate1d": "326T",
   "hashrate7d": "48.2T",
   "lastshare": 1684710340,
   "shares": 6821406464,
   "bestshare": 8292423213.317903,
   "bestever": 8292423213
  }
 ]
Pages:
Jump to: