Topic: Claymore XPM GPU Miner discussion - page 46. (Read 142112 times)

Hello everyone,

Who mines on ypool - please try to move to another pool
I personally know only one else which works well with this miner:  gpool.net (ip address  for config in tutorial)


Pool monopoly is definately bad for the coin! 


btw, thanks for the miner, on my dual 7950 works well  

I missed it in v2.1, added in v2.2, it will be available in a few days.

If you get TRT = 0 or such big value, set "-hc 256" (see readme). Also make sure that Catalyst 13.12 is used, disabled overclocking and reboot computer.

Note that if you are on a dual core CPU and running even more than 2 cards, use the -ss 2 flag.

How can i see program start time or running time ?

Did Anyone test on 7950 or 280 . How about TRT and ch4 ?
Thank

TRT is floating between 838-840. Using a 7850 OC'd to 1090-GPU and 1345-Mem  I have the -hc set to 256 and no lag at all.

I'm getting about 90 7ch/h if I only start one card. The -t 8 doesn't seem to make much of a difference, still around 90 7ch/h. If I remove -ss 2 from the bat file, still around 90 if only starting on one card.

i'm somewhat confused about the CPD
my estimated says 1.2276
my average says 3.4324

so am i making 3.4324 cpd?
just not sure why they would be so far off from one another

@Claymore


C:\Users\Dell\Desktop\Claymore XPM GPU Miner v2.0 Beta\Claymore XPM GPU Miner v2
.0 Beta>setx GPU_MAX_ALLOC_PERCENT 100

SUCCESS: Specified value was saved.

C:\Users\Dell\Desktop\Claymore XPM GPU Miner v2.0 Beta\Claymore XPM GPU Miner v2
.0 Beta>NsXpmMiner.exe -o ypool.net -u ***** -p ***** -di 0 -t 8
GPU index: 0
GPU name: Pitcairn
HashCnt = 512

╔═══════════════════════════════════════════════════════════════╗
║                Claymore XPM GPU Miner  v2.0 Beta              ║
╚═══════════════════════════════════════════════════════════════╝
YPOOL version...
Catalyst 13.12 is highly recommended for best performance and compatibility
Launching miner...
GPU Device: 0
Connecting to 'ypool.net' (128.65.210.247)
Using 8 threads
Username: *****
Password: ****
Using x.pushthrough protocol
xpt: Logged in

══════════════════════════════════════════════════════════════════════════════
Tue Apr 15 15:07:19 2014
New Block: 493917 - Diff: 10.710081 / 7.000000
Total/Valid shares: [ 0 / 0 ]  -  Max diff: 0.000000
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [      0] [      0] [      0] [      0] [      0] [      0] [      0]
  ch/h: [      0] [  0.000] [  0.000] [  0.000] [  0.000] [  0.000] [  0.000]
══════════════════════════════════════════════════════════════════════════════
Total Round Time (TRT): 11795

Hello  Claymore

There is a strange problem in my rig. i need help Dev

MSI 7970 ( without overclocked i got this:

Total Round Time (TRT): 367
Total Round Time (TRT): 366
Total Round Time (TRT): 366
Total Round Time (TRT): 367

=============================================================

Same Card MSI 7970 on Other PC i got this:

Total Round Time (TRT): 0
Total Round Time (TRT): 0
Total Round Time (TRT): 0
Total Round Time (TRT): 0
==============================================================

then i check on 270X-

Total Round Time (TRT): 689
Total Round Time (TRT): 687
Total Round Time (TRT): 686
Total Round Time (TRT): 686

===============================================================


Same Card 270X on other PC , same specifcation of PC, same Cat Ver.


Total Round Time (TRT): 10882
Total Round Time (TRT): 10881
Total Round Time (TRT): 10890
Total Round Time (TRT): 10890


============================

40%

It is pool-related and also to reduce "luck factor". Mining speed is the same all the time.

With t8 cpu load is 40-50%, now gpu load is 97%
Not tried without t8 yet...
When you mention we need to mine 24hours before speed is picking up, is that the flow of coins in pool, or the acual mining speed your talking about?
If its mining speed, we loose alot of performance messing around with tuning the cards, and stock settings is a better aproach?
Thnx
edit: cpu load is 40-50% with -t 8 -ss 0

The best approach is to test how it works on your hardware If CPU is slow and GPUs are fast, "-t 8" may help. Otherwise it is useless.

With a 8 core processor, should -t 8 or higher number be used?
Again 2 gpu rig
Thnx for your other tips with set max, it seems to work on -hc 256

You should get about 100 7ch/h. What if start only one card, what 7ch/h does it show? What if specify "-t 8"?

Was curious if anyone had much experience with R9 290's on subpar processors?

I've got a 2.8 GHz G1830 Haswell Celeron dual core.

I have 4x R9 290s.

After 24 hours, I'm getting about 1.4 cpd per card. 4ch is 116k, and 7 ch is 83. They are overclocked, 1400/985, as that seemed to improve the 7ch from 75 to 83.

Based on previous reports, this seems a little low? I'm running it -ss 2 for each card. CPU usage fluctuates between 50-67%.

Is this the norm, or should I be getting better numbers? What can I change to improve the cpd?

i read...
and after all - whether it is possible to make support of old cards?

dont sank him
 UNSUPPORTED CARDS:

6xxx and earlier.