Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 20. (Read 2145055 times)

Yes please, add support for cryptonight lite V7, please...

Thanks Claymore for all the support and i am a big fan of you software, but unfortunate we cannot use the software anymore due to different variant of cryptonote forks.

Is it possible to add different variant of the cryptonote like the light V7
now after everyone forking to block asic miners and there scam, they are adopting different type of the new cryptonote version

 # 1MiB scratchpad memory
 *    cryptonight_lite
 *    cryptonight_lite_v7
 *    # 2MiB scratchpad memory
 *    cryptonight
 *    cryptonight_v7
 *    # 4MiB scratchpad memory
 *    cryptonight_heavy
 */"currency" : "cryptonight_lite_v7",


is it possible please to add all the variant or at least these, so we can mine other coins.

Thanks.

Try SRBMiner.

Yes, less hash on heavy.

Damn, I tried switching to windows, but I get hardly any hash.   Is the heavy algo just that slow?  I lost 1k hash on 6 rx470s

Claymore doesn't support Heavy algo.

Oops forgot to mention I'm using ethos.

"cryptonight_type" : "heavy",

Hi all, need some help, switching to mining SUMO on my rig, and i can't find the flag settings for Cryptonight Heavy.  Mining cryptonightv7 now.

anyone know the settings?

We need another update, intense coin forked.
Plus we need the additional tweaks..thank you

I can confirm that adding the DWORD in registry to enable compute mode works. Solves the weird output and enables full hashrate as expected.

In version 10.2 was added share checking by CPU, but if CPU fails - miner drops this share. With this these shares can be correct. How can I disable this CPU share check? (readme nothing said about)

-dmem 0
don't helps with old cards

Thanks for there reply!
My rx570 are 4 gb version.

I am testing other miners to see how they keep stable.
Best regards.

Are you using Windows?

Increase virtual memory to 48000MB since you have 6*8GB graphics

Maybe specify: -pow7 1

try to use -dmem 0

if still persist, reduce your -h value and check your OC settings, XMR has different clocks config over Eth

HI everybody i am having a issue on my Claymore config.

I am minning on Nanopool to a Coinpayments wallet.

My start is:
NsGpuCNMiner.exe -xpool stratum+ssl://xmr-eu1.nanopool.org:14433 -xwal wallet-adress.paymentID.rig_name/my@email -xpsw x -pow7 1

I have 6 RX570n and driver 17.11.1 with all cards in compute mode, it claymore ethereum is working properly

Any one has an idea of what this is ?

My command line output is:
╔════════════════════════════════════════════════════════════════╗
║           Claymore's CryptoNote AMD GPU Miner v11.3            ║
╚════════════════════════════════════════════════════════════════╝

XMR: 6 pools are specified
Main Monero pool is xmr-eu1.nanopool.org:14433
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 6
GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 470/570
GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
GPU #1 recognized as Radeon RX 470/570
GPU #2: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 4:0:0)
GPU #2 recognized as Radeon RX 470/570
GPU #3: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 5:0:0)
GPU #3 recognized as Radeon RX 470/570
GPU #4: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 6:0:0)
GPU #4 recognized as Radeon RX 470/570
GPU #5: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 7:0:0)
GPU #5 recognized as Radeon RX 470/570
POOL version
GPU #0 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #1 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #2 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #3 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #4 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
GPU #5 algorithm ASM, -h 896, -dmem 1 (Memory used: 3672MB)
Total cards: 6
XMR: Stratum - connecting to 'xmr-eu1.nanopool.org' <217.182.169.148> port 14433 (SSL/TLS)
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Monero Pow7 algorithm enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
SSL/TLS encryption is enabled
XMR: Stratum - Connected (xmr-eu1.nanopool.org:14433) (SSL/TLS)
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner dk2an0 failed -4
XMR: 04/20/18-22:40:47 - New job from xmr-eu1.nanopool.org:14433
XMR - Total Speed: 3002 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
XMR: GPU0 0 H/s, GPU1 749 H/s, GPU2 755 H/s, GPU3 752 H/s, GPU4 746 H/s, GPU5 0 H/s
XMR: 04/20/18-22:40:53 - SHARE FOUND - (GPU 2; share value 0x000034c0)
Share accepted (78 ms)!
GPU0 t=44C fan=0%, GPU1 t=51C fan=0%, GPU2 t=53C fan=21%, GPU3 t=51C fan=26%, GPU4 t=52C fan=0%, GPU5 t=45C fan=0%
WATCHDOG: GPU error, you need to restart miner
Quit, please wait...
Restarting OK, exit...

https://www.cryptunit.com/

select coin, press MORE.... list of pools you see


----
BTC

 

I think that must be a hangover from some previous version of Claymore and has not been updated as I can happily mine at MiningPoolHub, which uses "Login.Worker", and without using the "-allpools 1" option. Here is the config I use and it works fine.