Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 23. (Read 2145055 times)

He did...and called it "Claymore's CryptoNote AMD GPU Miner v11.3"

Hello, Please add "-pow7 1" to "Claymore CryptoNote GPU Miner v9.7 Beta - POOL", thanks! 

I think -h 1792 is too much,my 580 8G can only handle 1200.....try lower to under 900

Hello, I have maps of HD 6990. Please add "-pow7 1" to "Claymore CryptoNote GPU Miner v9.7 Beta - POOL", thanks in advance!

Try -h 860

Never mind.  Didn't factor in difficulty.  duh!

Okay this is weird.  Wondering if anyone else has experienced this.  Have four rigs mining monero.  Three have 2 card with ~1700 hashes each, get around 3500 shares every 30 minutes.  The fourth rig has 6 rx470 at ~3600 hashes, but that one only shows ~1500 shares over 30 minutes.  That's like 1/4 the of the shares the other three rigs do.

If run three instances of claymore with 2 cards each, my shares increase to nearly 5500 over 30 minutes for each of the three instances of two rx470 each - just ~1200 hashes a piece.

Why would running more cards produce fewer shares than running the fewer cards in more instances of claymore?  I've been running these for a few months now - have no idea why...

Hello

Running the this version on pandaminer. I want to join nanopool for new XMR mining (ie. post April 6th).

Would appreciate comment on output below. Sorry if its long. But at the bottom you can see several GPUs 'failed''.

C:\Users\Administrator\Desktop\pandaminer_tool>NsGpuCNMiner.exe -xpool stratum+ssl://xmr-us-west1.nanopool.org:14433 -xwal 48XcJDfxVtPW9iNJ22YfSuebKLtBwQaj8CS1wCUkVJ3wDJjnPGnW7p28p71Z1dZBsgW9GzTiUWwYmgZ Pbhf6m9wVUt48SEP -xpsw x -pow7 1

赏屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯突
?          Claymore's CryptoNote AMD GPU Miner v11.3            ?
韧屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯图

XMR: 6 pools are specified
Main Monero pool is xmr-us-west1.nanopool.org:14433
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 8
GPU #0: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 3:0:0)
GPU #1: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 4:0:0)
GPU #2: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 5:0:0)
GPU #3: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 6:0:0)
GPU #4: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 8:0:0)
GPU #5: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 9:0:0)
GPU #6: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 10:0:0)
GPU #7: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 28 compute units (pci bus 11:0:0)
POOL version
GPU #0 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #1 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #2 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #3 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #4 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #5 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #6 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
GPU #7 algorithm ASM, -h 1792, -dmem 0 (Memory used: 3673MB)
Total cards: 8
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Monero Pow7 algorithm enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
XMR: Stratum - connecting to 'xmr-us-west1.nanopool.org' <45.63.61.87> port 14433 (SSL/TLS)

SSL/TLS encryption is enabled
XMR: Stratum - Connected (xmr-us-west1.nanopool.org:14433) (SSL/TLS)
GPU 3, GpuMiner k1a failed -4
GPU 3, GpuMiner k1a failed -4
GPU 0, GpuMiner k1a failed -4
GPU 4, GpuMiner k1a failed -4
GPU 3, GpuMiner k1a failed -4
GPU 4, GpuMiner k1a failed -4
GPU 4, GpuMiner k1a failed -4
GPU 3, GpuMiner k1a failed -4
GPU 0, GpuMiner k1a failed -4
GPU 4, GpuMiner k1a failed -4
GPU 0, GpuMiner k1a failed -4
GPU 0, GpuMiner k1a failed -4
Quit...

C:\Users\Administrator\Desktop\pandaminer_tool>

THANKS, REALLY!--

That is the first response that I have had worth reading.  I don't want to hear about other mining programs, but I do want input about Claymore-XMR v11.3.  I run my cards on Linux and just purchased a new Vega 64.  Any postings about Claymore's XMR miner are welcome.       --scryptr

I haven't been able to get 11.3 to run with my vega cards using adrenaline drivers 18.3.4

Are there any differences in mining speed between eu1，eu2，asia1，us-east1，us-west1? Has any one tested these servers? Is choosing the closest server to the mining rig the best option?

And I responded about Claymore-XMR v11.3.  It is not going to get any decent results with Vega GPUs.  That is a fact.  That is why I responded as I did.  It is a legitimate material response from an expert who has been using Claymore's CN miner since 9.6 daily on multiple Tahiti rigs, Ellesmere rigs, but never Vega rigs, because it sucks with Vega's.  Believe me I have tried.

Now regarding insults:  I have not insulted you, but keep it up and I definitely will show you what an insult is.

NO, IT IS A LEGITIMATE QUESTION WITHIN THE TOPIC OF THIS THREAD--

I asked about Claymore-XMR v11.3.   I did not ask for your insults, and I have researched the other miners.  I am able to do my own research.  I still would like to read input from miners using Claymore-XMR v11.3, the current version, and Vega GPUs.   Please don't insult me again, I am asking a legitimate question.        --scryptr

And YOUR RESPONSE IS FUTILE--

YOUR RESPONSE IS OFF-TOPIC--

I am asking about the current Claymore-XMR miner, v11.3.  I have read about the other miners on my own.       --scryptr

Claymore do not do Heavy algorithm
these parasites still do not pay anything)))

Don't waste your time, you can't get it anywhere close to XMR-Stak or SRBMiner-CN

CLAYMORE V11.3 CRYPTONIGHT MINER AND VEGA CARDS--

Has anyone have notes to share about the best settings on Claymore-XMR v11.3 for Vega cards?  I am really interested, thanks.       --scryptr

RIP 5870 hashrate. 200 with 9.7 to 140 with stak. Anybody know of a better miner for it?

+1 Need mine heaven... need  Heavy algoritm please....