Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 210. (Read 2145059 times)
i guess -tt 90 command did not work on my card. i see 100C and stop that
I need help with this Miner. How the fuck can I set up the commands?
This console is always closing and generating the log file with errors.
Can somebody explain me how to configure this Miner?
It wasn´t written here where to write all this commands etc...
I have i7 5930k and R9 280x
This console is always closing and generating the log file with errors.
Can somebody explain me how to configure this Miner?
It wasn´t written here where to write all this commands etc...
I have i7 5930k and R9 280x
Will this miner work on an ATI R9 390 GPU?
Asking for a friend, sorry if it has been asked/answered before, I didn't see.
Asking for a friend, sorry if it has been asked/answered before, I didn't see.
Well there be any support for CryptoNight-Lite for mining AEON
Also waiting for that
Well there be any support for CryptoNight-Lite for mining AEON
is there any nvidia supported version of this miner ?
I want to use my GPUs to mine some cryptonight coins...
Can I use this miner to mine Monero XMR or Bytecoin BCN with my GPUs?
Can I use this miner to mine Monero XMR or Bytecoin BCN with my GPUs?
Yup. Assuming they're AMD.
Ok, but can I run it on a windows 7 32?
I have my GPUs installed on a 32 system. do I need to instal a 64 system?
I want to use my GPUs to mine some cryptonight coins...
Can I use this miner to mine Monero XMR or Bytecoin BCN with my GPUs?
Can I use this miner to mine Monero XMR or Bytecoin BCN with my GPUs?
How's the CryptoNight-Lite update coming along?
What is the lite?
the cryptonote coin Aeon, being developed now by smooth, has a different POW that can be mined on smartphones.. at least, thats the goal.
How's the CryptoNight-Lite update coming along?
What is the lite?
How's the CryptoNight-Lite update coming along?
Hi everyone,
I new to this forum.
I running 3xR9 390 rig and getting error message as below stated
cannot find block data:
{"jsonrpc":"2.0","error":{code":20, "message":"Invalidshare."}, "id":1, "result":null}
cannot convert blob data
Claymore can you help me or someone help me?
Claymore do your v9.3 support R9 390 - 15.7 driver
Thanks
I new to this forum.
I running 3xR9 390 rig and getting error message as below stated
cannot find block data:
{"jsonrpc":"2.0","error":{code":20, "message":"Invalidshare."}, "id":1, "result":null}
cannot convert blob data
Claymore can you help me or someone help me?
Claymore do your v9.3 support R9 390 - 15.7 driver
Thanks
Well running it like
Opens a cmd prompt sets the environment variables then miner opens in another cmd window so I think that is already taken care of :/
My current code looks like this
Which opens cmd prompt sets EV then closes that initial window and opens another followed by the miner.
So yeah pretty sure NsGpuCNMiner always starts a new cmd prompt.
Hmm...
Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
NsGpuCNMiner.exe -o -u x -p x -wd 1
setx GPU_USE_SYNC_OBJECTS 1
NsGpuCNMiner.exe -o -u x -p x -wd 1
Opens a cmd prompt sets the environment variables then miner opens in another cmd window so I think that is already taken care of :/
My current code looks like this
Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
start /D D:\Crypto\Monero\Miner\GPU\ cmd /c NsGpuCNMiner.exe -o -u x -p x -wd 1
setx GPU_USE_SYNC_OBJECTS 1
start /D D:\Crypto\Monero\Miner\GPU\ cmd /c NsGpuCNMiner.exe -o -u x -p x -wd 1
Which opens cmd prompt sets EV then closes that initial window and opens another followed by the miner.
So yeah pretty sure NsGpuCNMiner always starts a new cmd prompt.
Hmm...
Hmm so in my batch file I have
and they return successful but miner is always stuck at 64%
Using catalyst 15.7.1 and 9.3 of miner
Any ideas?
Tried running as admin...
Thanks
Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_USE_SYNC_OBJECTS 1
and they return successful but miner is always stuck at 64%
Using catalyst 15.7.1 and 9.3 of miner
Any ideas?
Tried running as admin...
Thanks
I think I remember reading that once GPU_MAX_ALLOC_PERCENT is set, you must launch the miner from another cmd/terminal instance, not the same one you just used. Give that a go.
Hmm so in my batch file I have
and they return successful but miner is always stuck at 64%
Using catalyst 15.7.1 and 9.3 of miner
Any ideas?
Tried running as admin...
Thanks
Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_USE_SYNC_OBJECTS 1
and they return successful but miner is always stuck at 64%
Using catalyst 15.7.1 and 9.3 of miner
Any ideas?
Tried running as admin...
Thanks
Claymore -
Can you estimate a price for releasing the miner as open source?
Thanks!!
-g
Can you estimate a price for releasing the miner as open source?
Thanks!!
-g
I, too, want to mine the new algo aeon thanks
Yeah, please add support for Aeon's CryptoNight-Lite algo. Smooth breathed new life into it.
Hello there! Thanks for your miner!
I'm going to make a GUI for this miner, just like I did for CPU Miner (http://sourceforge.net/projects/cpuminergui/).
Can I upload the package (the GUI + the miner) to a Sourceforge project I'll create for the GUI?
I'm going to make a GUI for this miner, just like I did for CPU Miner (http://sourceforge.net/projects/cpuminergui/).
Can I upload the package (the GUI + the miner) to a Sourceforge project I'll create for the GUI?
No problem, do it
Ok, thanks! By the way, I use this miner on an AMD R9 M265X. Do I have to install anything else to improve performance? I use the latest drivers available on W8.1.
You can try to change HashCnt to find the best speed.
Thanks! I tried to change it, but anything below the default decreases my hash rate and anything above it crashes the program, so I guess I'm good.
I have an R9 M265X, I get 160 H/s, and an i7-4720HQ, I get 90-110 H/s with it, I guess I can't get too much from a laptop.
Hi,please add CryptoNight-Lite algo to your gpu miner,thx
This question has already been answered.
Jump to: