Claymore's CryptoNote AMD GPU Miner v11.3 - page 27.

metz

newbie

Activity: 23

Merit: 0

Quote from: amedeusx on April 09, 2018, 01:21:55 AM

Quote from: zot57 on April 09, 2018, 01:01:11 AM

I am getting error: cannot convert blob data

how to fix this?

add this -pow7 1

Thank you... If I was running the miner without -pow7 1 for several hours, does that mean my shares were not doing anything? Huh

notevilaccount

newbie

Activity: 1

Merit: 0

Quote from: damaste on April 08, 2018, 10:15:36 PM

Quote from: dirton on April 06, 2018, 12:27:44 PM

Unfortunately same 0 H/s Sad

Any other efficient miners for old AMD VGAs?
XMRig gives only 90H/s, whereas Claymore's 9.7 Miner was outputting 220H/s and that was very good for such an old card.

Claymore the owners of old cards bagging you, please add CryptoNightV7 support to 9.7 version. Your miner is simple the best for these GPUs.

Yes please add -pow7 to 9.7 version 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻

Currently using win7 and 14.4 drivers + other miner to get v7 hash agreeable with hd6970s. R9 290x card in same rig suffers quite bad, 11.3 pow7 gives some ~475 rate, with dmem 1 and -h 363. dmem 0 and/or h value between ~300-1000 seems to result 0-400-450 h/s.

6970 cards benefit some 250 h/s and 290 is loosing 200, compared to win7+15.12 or 15.7x, or win10.

Any idea for some miner/settings combo for 290 card with 14.4 driver? Tried allready quite a bit. Different drivers for cards wasnt anyhow possible?

Or please that v7 for ver 9.7 miner.

Eisenkopf89

full member

Activity: 262

Merit: 101

Quote from: rockk on April 09, 2018, 01:30:12 AM

Quote from: bobben2 on April 08, 2018, 04:22:29 AM

Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully.
All my RX 570s hashing at 850-855H/s Cheesy

Claymore, you are the champ!

heya could u share ur start bat ? i m a newb , much appreciated.

My RX570 get about 870-900 H/s on Cast XMR. Settings for it:

Temp target: 60 C
Coreclock: 1150
Corevoltage: 850
Memclock: 2000
Memvoltage: 850

AlexanderDumas

newbie

Activity: 206

Merit: 0

Quote from: vorpalspear on April 08, 2018, 08:04:08 PM

Quote from: STAT303954 on April 06, 2018, 12:55:08 PM

Quote from: Ray69 on April 06, 2018, 08:17:24 AM

Hi all,

I have not used Claymore before and have just set it up for my Vega rig,

I am getting approx 1750 h/s per card with xmr-stak this was nearer 2000 h/s

The miner displays the message 'this miner is not optimised for Vega'

Can someone tell me what I need to change and where.

I have tried several settings in config but they just make things slower or not work at all.

Thanks

castXmr is very efficient for Vegas

Are you sure about that? Cast is closed-source. Unless you (or someone) have a lot of VEGAs and have collected a lot of data over time, you probably have no idea if Gandalf hasn't padded the stats by 5-10%. I guess the same thing can be said for binaries from any source.

XMR-STAK and SGminer both give comparable hashrates if configured correctly. Besides, why run your cards at 1900-2000+ H/s with profitability where it is now? Let them run cooler and save the fan bearings.

I have been mining with Cast for 5 months and the stats are not padded. At the Nanopool, with both ETN and XMR, averaging results per 24 hours periods, I actually get a few % H/s more than those recorded by the miner.

rockk

jr. member

Activity: 20

Merit: 0

Quote from: bobben2 on April 08, 2018, 04:22:29 AM

Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully.
All my RX 570s hashing at 850-855H/s Cheesy

Claymore, you are the champ!

heya could u share ur start bat ? i m a newb , much appreciated.

amedeusx

newbie

Activity: 82

Merit: 0

Quote from: zot57 on April 09, 2018, 01:01:11 AM

I am getting error: cannot convert blob data

how to fix this?

add this -pow7 1

telep

newbie

Activity: 13

Merit: 1

SOLVED!!:)

Thank you for all the answers about this error,

Finally, the solution was to increase virtual memory in windows:
I´ve 8gpu 8gb each one, 8*8= 64 gb to manage -> so i increase virtual memory (min 32000 max 64000) and it works perfect as always..

If your system can´t manage this amount of memory, the only option is to change single gpu memory on claymore with -dmem 0 config (less hashrate)

Regards.

Quote from: poseidon1971 on April 08, 2018, 04:18:44 PM

Hi Telep.
Hello friends, I think the reason is that, as explained by Calymore, version 11.3 does not support the 500 series: "This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 1GB or more."

The experts of this forum could expand if this statement is true. Thank you

Quote from: telep on April 08, 2018, 04:23:29 AM

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

zot57

newbie

Activity: 165

Merit: 0

I am getting error: cannot convert blob data

how to fix this?

damaste

newbie

Activity: 1

Merit: 0

Quote from: dirton on April 06, 2018, 12:27:44 PM

Unfortunately same 0 H/s Sad

Any other efficient miners for old AMD VGAs?
XMRig gives only 90H/s, whereas Claymore's 9.7 Miner was outputting 220H/s and that was very good for such an old card.

Claymore the owners of old cards bagging you, please add CryptoNightV7 support to 9.7 version. Your miner is simple the best for these GPUs.

Yes please add -pow7 to 9.7 version 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: biggee on April 08, 2018, 09:06:24 PM

I'm using 6 x mixture of 470/480 and seeing the exact same thing for all of my cards :

1628 GPU 4, GpuMiner dk2an0 failed -4
etc etc...

Then the miner quits.

Quote from: poseidon1971 on April 08, 2018, 04:18:44 PM

Hi Telep.
Hello friends, I think the reason is that, as explained by Calymore, version 11.3 does not support the 500 series: "This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 1GB or more."

The experts of this forum could expand if this statement is true. Thank you

Quote from: telep on April 08, 2018, 04:23:29 AM

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

As previously posted, have you tried -dmem 0, and lower your -h value, 480 and 470 has different -h settings and may not applied to both that could cause GPU crash

biggee

member

Activity: 73

Merit: 10

I'm using 6 x mixture of 470/480 and seeing the exact same thing for all of my cards :

1628 GPU 4, GpuMiner dk2an0 failed -4
etc etc...

Then the miner quits.

Quote from: poseidon1971 on April 08, 2018, 04:18:44 PM

Hi Telep.
Hello friends, I think the reason is that, as explained by Calymore, version 11.3 does not support the 500 series: "This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 1GB or more."

The experts of this forum could expand if this statement is true. Thank you

Quote from: telep on April 08, 2018, 04:23:29 AM

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

vorpalspear

jr. member

Activity: 81

Merit: 1

Quote from: STAT303954 on April 06, 2018, 12:55:08 PM

Quote from: Ray69 on April 06, 2018, 08:17:24 AM

Hi all,

I have not used Claymore before and have just set it up for my Vega rig,

I am getting approx 1750 h/s per card with xmr-stak this was nearer 2000 h/s

The miner displays the message 'this miner is not optimised for Vega'

Can someone tell me what I need to change and where.

I have tried several settings in config but they just make things slower or not work at all.

Thanks

castXmr is very efficient for Vegas

Are you sure about that? Cast is closed-source. Unless you (or someone) have a lot of VEGAs and have collected a lot of data over time, you probably have no idea if Gandalf hasn't padded the stats by 5-10%. I guess the same thing can be said for binaries from any source.

XMR-STAK and SGminer both give comparable hashrates if configured correctly. Besides, why run your cards at 1900-2000+ H/s with profitability where it is now? Let them run cooler and save the fan bearings.

vorpalspear

jr. member

Activity: 81

Merit: 1

Quote from: dmwardjr on April 08, 2018, 03:23:43 AM

Quote from: rednoW on April 08, 2018, 02:11:04 AM

Quote from: yatta on April 07, 2018, 03:22:01 PM

Quote from: rednoW on April 07, 2018, 10:54:57 AM

There are a lot cryptonight miners around that a much better than Claymore's. So if he doesn't want to continue development - leave 0% fee and exit is a right move!

Name it.

xmr stak
cast xmr
sgminer-gm 5-5-5
SRBminer

Thanks for those recommendations. I'll give Cast and SgMiner a go to see how they do. I have a feeling Cast may suit me well.

I use xmr-stak or sgminer. Some motherboards (or is it the cards?) seem to like one over the other.
Some seem to prefer CastXMR but as it is closed source, I can't verify that the reported hashrate isn't a lie, so I don't use it.

vorpalspear

jr. member

Activity: 81

Merit: 1

Quote from: shimmishim on April 08, 2018, 07:25:54 PM

Now if I could just get miner manager to work...

No idea about this, didn't even know it existed.

Anyone have any idea if it is yet possible to get good hashrates out of a linux setup with VEGA?
Did AMD ever release good drivers for linux? How about the windows drivers, are we still stuck with
the August 23 blockchain drivers?

shimmishim

newbie

Activity: 8

Merit: 0

For sure. Wish I had researched this before hand. Would've definitely spent some more money on a larger SSD. Grin

Now if I could just get miner manager to work...

Quote from: vorpalspear on April 08, 2018, 07:17:23 PM

Quote from: shimmishim on April 08, 2018, 07:07:32 PM

I googled the error and found post #4625 explains what's going on.

https://bitcointalksearch.org/topic/m.22374228

It has to do with not having enough virtual memory.

-dmem 0 prevents it from using double your memory and fixes the issue or you can adjust your virtual memory accordingly.

Seems like monero is much more memory intensive than ether mining. Lots of errors showing up now on my machines.

But anyone know why Claymore miner manager won't work when you're running Monero? I tried google... but no luck!

Yeah, this is correct for xmr-stak, cast-xmr, sgminer, and probably every other cryptonight miner. Take your memory on all your video cards, add it up, and you need at least that much virtual memory. Yeah, it sucks, because you can't use a very small SSD.

vorpalspear

jr. member

Activity: 81

Merit: 1

Quote from: shimmishim on April 08, 2018, 07:07:32 PM

I googled the error and found post #4625 explains what's going on.

https://bitcointalksearch.org/topic/m.22374228

It has to do with not having enough virtual memory.

-dmem 0 prevents it from using double your memory and fixes the issue or you can adjust your virtual memory accordingly.

Seems like monero is much more memory intensive than ether mining. Lots of errors showing up now on my machines.

But anyone know why Claymore miner manager won't work when you're running Monero? I tried google... but no luck!

Yeah, this is correct for xmr-stak, cast-xmr, sgminer, and probably every other cryptonight miner. Take your memory on all your video cards, add it up, and you need at least that much virtual memory. Yeah, it sucks, because you can't use a very small SSD.

shimmishim

newbie

Activity: 8

Merit: 0

I googled the error and found post #4625 explains what's going on.

https://bitcointalksearch.org/topic/m.22374228

It has to do with not having enough virtual memory.

-dmem 0 prevents it from using double your memory and fixes the issue or you can adjust your virtual memory accordingly.

Seems like monero is much more memory intensive than ether mining. Lots of errors showing up now on my machines.

But anyone know why Claymore miner manager won't work when you're running Monero? I tried google... but no luck!

carlo_0000

legendary

Activity: 1281

Merit: 1003

for me default -h value for 570 4G is to high it crash or get very low hasrate on gpu0
work fine on 470

also for 380 2G default -h is to high it try to use more than 2g memory and fails

rhaegonz

newbie

Activity: 64

Merit: 0

I have 2 Rigs and im using this command: -xpool XXXXX -xwal XXXXXX -xpsw XXXXX -pow7 1 -dmem 1 -h 896

- x6 MSI 4G RX570 -> 2.4 mhs (cap to exactly 400hs each)
- x5 NITRO 4G RX570 -> 3.6 mhs (720~ each)

Both rigs running at 950core/2000mem and BIOS modified timmings (by polaris app).

I think its a bit weird same command and very different results with this new claymore, if i switch to xmrig or xmr-amd-stak everything is fine!

The only way to make the MSI rig faster is by adding -dmem 0 and -h 632 and that gives only about 3.7mhs(vs 4.2 on other miners app) which still very low considering it has one more gpu than the other rig ...

poseidon1971

newbie

Activity: 4

Merit: 0

Hi Telep.
Hello friends, I think the reason is that, as explained by Calymore, version 11.3 does not support the 500 series: "This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 1GB or more."

The experts of this forum could expand if this statement is true. Thank you

Quote from: telep on April 08, 2018, 04:23:29 AM

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 27. (Read 2145055 times)