Claymore's CryptoNote AMD GPU Miner v11.3 - page 268.

restless

legendary

Activity: 1151

Merit: 1001

Is Merge mining supported?

Kire

newbie

Activity: 11

Merit: 0

Quote from: frozn00 on July 02, 2014, 04:56:22 PM

Quote from: ?? on ??

Quote from: frozn00 on July 02, 2014, 04:17:14 PM

Quote from: ?? on ??

Quote from: frozn00 on July 02, 2014, 04:05:21 PM

Been trying to get my 5x 280x's to work for hours. Need some help. My bat file is as follows:
@echo off
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -u

-p x
The pools are in pools.txt
When starting I get: Error Frontend phase failed compilation. Error: Compliation from LLVMIR binary to IL text failed!
I then hit the ok button then I get a bunch of these. Any ideas?

Updated drivers to 13.12
I have also set the custom size on the pagefile to Minimum: 19000 (~19gb) and Maximum 20000 (~20gb)

DevFee: Pool Diff 2000
GPU 1, GpuMiner k1a failed -48
GPU 4, GpuMiner k1a failed -48
GPU 2, GpuMiner k1a failed -48
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU 3, GpuMiner k1a failed -48
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU 0, GpuMiner k1a failed -48
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory

i had this too

remove all gpu environment variables from system prob.
and restart miner

Not sure how to do that. :/ Thanks for the quick reply.

right click your computer: then choose
proberties
advanced system proberties
environment variables

then remove all gpu variables
start mining again

this helps me when it stucks, one time i needed to reboot and set page file size again

I have removed the environmental variables like you said but I am still getting the same error. I have tried removing the setx GPU_MAX_ALLOC_PERCENT 100 from the bat file restarting...also tried to use this variable but still nothing. Do you happen to have anymore ideas?

GO TO: right click on my computer, properties, advanced system seting, performace, setings, advanced, vitrual memory, change, custom size, then set 18000 initial and maximum size. YOU ARE DONE

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: onetwentyfive on July 03, 2014, 03:03:12 AM

Come on, I'm using your miner. Paying your 5% dev fee. The least you could do is answer my question, will there ever be a 32 bit version of the miner?

I'm not living in this forum, so sorry for the delay

I think there will not be 32 bit version of this miner, it requires too much GPU memory and it's even unstable sometimes on 64bit systems, I'm sure OpenCL on 32bit platform would work even worse.

onetwentyfive

member

Activity: 98

Merit: 10

Come on, I'm using your miner. Paying your 5% dev fee. The least you could do is answer my question, will there ever be a 32 bit version of the miner?

Starlightbreaker

legendary

Activity: 1764

Merit: 1006

Quote from: Dogeshop_eu on July 02, 2014, 02:53:28 PM

Quote from: Starlightbreaker on July 01, 2014, 01:17:07 AM

Quote from: gregor12 on July 01, 2014, 12:05:47 AM

Anyone else got problem with 280x rig? when i run single card it works fine, but when I add 2nd card it keeps crashing after few
hours of mining(6-18h). I get notice about virtual memory, i tryed to set it to 16gb and 32gb, still crashing. I got 8gb of ram and
280x toxic, on stock it works ~840hashes (1150engine 1600mem), if i downclock to 1100engine, 1500mem it works 860 hashes and
i still get crash after like 12h.
This is the msg - GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings
/ Performance / Advanced / Virtual Memory

nope.

running 5 cards on 8.1, no problems.

it ran for 4-5 days before i restarted it.

have you modified your drivers?

nope, 13.12 straight from amd.

Strannik-74

full member

Activity: 348

Merit: 102

[2014-07-03 11:18:30] GPU #2: GeForce GTX 750, 256.38 H/s
[2014-07-03 11:18:30] GPU #0: GeForce GTX 750 Ti, 273.58 H/s
[2014-07-03 11:18:30] accepted: 1006/1006 (100.00%), 529.97 H/s (yay!!!)
=)

mapleshadow

member

Activity: 79

Merit: 10

280X rate is too low, it is difficult to understand Undecided

33zer0w0lf

full member

Activity: 224

Merit: 100

Quote from: grendel25 on July 02, 2014, 09:27:57 PM

Quote from: 33zer0w0lf on July 02, 2014, 09:18:07 PM

So I have this all setup and it works but it only mines with 1 card even though I have 3 in the machine?
cards available 1 it says

what kind of cards, do the cards show up in device manager, what drivers, what OS, follow all the guidance in the first page? (mem settings, reboot, etc)

r9 290's yes latest, windows 7

grendel25

legendary

Activity: 2296

Merit: 1031

Quote from: 33zer0w0lf on July 02, 2014, 09:18:07 PM

So I have this all setup and it works but it only mines with 1 card even though I have 3 in the machine?
cards available 1 it says

what kind of cards, do the cards show up in device manager, what drivers, what OS, follow all the guidance in the first page? (mem settings, reboot, etc)

33zer0w0lf

full member

Activity: 224

Merit: 100

So I have this all setup and it works but it only mines with 1 card even though I have 3 in the machine?
cards available 1 it says

grendel25

legendary

Activity: 2296

Merit: 1031

Quote from: wacko on July 02, 2014, 12:08:00 PM

Quote from: grendel25 on July 02, 2014, 10:32:01 AM

I underclocked my toxic core and other cards mem to 1500. oc'd core on asus and saph vapor x.. ended up gaining about 130 h/s. 4 card rig at 1933 h/s.

What memory do your cards have, Hynix or Elpida?

Hynix

frozn00

newbie

Activity: 7

Merit: 0

Quote from: ?? on ??

Quote from: frozn00 on July 02, 2014, 04:17:14 PM

Quote from: ?? on ??

Quote from: frozn00 on July 02, 2014, 04:05:21 PM

Been trying to get my 5x 280x's to work for hours. Need some help. My bat file is as follows:
@echo off
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -u

-p x
The pools are in pools.txt
When starting I get: Error Frontend phase failed compilation. Error: Compliation from LLVMIR binary to IL text failed!
I then hit the ok button then I get a bunch of these. Any ideas?

Updated drivers to 13.12
I have also set the custom size on the pagefile to Minimum: 19000 (~19gb) and Maximum 20000 (~20gb)

DevFee: Pool Diff 2000
GPU 1, GpuMiner k1a failed -48
GPU 4, GpuMiner k1a failed -48
GPU 2, GpuMiner k1a failed -48
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU 3, GpuMiner k1a failed -48
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU 0, GpuMiner k1a failed -48
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory

i had this too

remove all gpu environment variables from system prob.
and restart miner

Not sure how to do that. :/ Thanks for the quick reply.

right click your computer: then choose
proberties
advanced system proberties
environment variables

then remove all gpu variables
start mining again

this helps me when it stucks, one time i needed to reboot and set page file size again

I have removed the environmental variables like you said but I am still getting the same error. I have tried removing the setx GPU_MAX_ALLOC_PERCENT 100 from the bat file restarting...also tried to use this variable but still nothing. Do you happen to have anymore ideas?

frozn00

newbie

Activity: 7

Merit: 0

Quote from: ?? on ??

Quote from: frozn00 on July 02, 2014, 04:05:21 PM

Been trying to get my 5x 280x's to work for hours. Need some help. My bat file is as follows:
@echo off
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -u

-p x
The pools are in pools.txt
When starting I get: Error Frontend phase failed compilation. Error: Compliation from LLVMIR binary to IL text failed!
I then hit the ok button then I get a bunch of these. Any ideas?

Updated drivers to 13.12
I have also set the custom size on the pagefile to Minimum: 19000 (~19gb) and Maximum 20000 (~20gb)

DevFee: Pool Diff 2000
GPU 1, GpuMiner k1a failed -48
GPU 4, GpuMiner k1a failed -48
GPU 2, GpuMiner k1a failed -48
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU 3, GpuMiner k1a failed -48
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU 0, GpuMiner k1a failed -48
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory

i had this too

remove all gpu environment variables from system prob.
and restart miner

Not sure how to do that. :/ Thanks for the quick reply.

frozn00

newbie

Activity: 7

Merit: 0

Been trying to get my 5x 280x's to work for hours. Need some help. My bat file is as follows:
@echo off
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -u

-p x
The pools are in pools.txt
When starting I get: Error Frontend phase failed compilation. Error: Compliation from LLVMIR binary to IL text failed!
I then hit the ok button then I get a bunch of these. Any ideas?

Updated drivers to 13.12
I have also set the custom size on the pagefile to Minimum: 19000 (~19gb) and Maximum 20000 (~20gb)

DevFee: Pool Diff 2000
GPU 1, GpuMiner k1a failed -48
GPU 4, GpuMiner k1a failed -48
GPU 2, GpuMiner k1a failed -48
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU 3, GpuMiner k1a failed -48
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU 0, GpuMiner k1a failed -48
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory
GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Compu
ter Properties / Advanced System Settings / Performance / Advanced / Virtual Mem
ory

Dogeshop_eu

member

Activity: 148

Merit: 10

Quote from: Starlightbreaker on July 01, 2014, 01:17:07 AM

Quote from: gregor12 on July 01, 2014, 12:05:47 AM

Anyone else got problem with 280x rig? when i run single card it works fine, but when I add 2nd card it keeps crashing after few
hours of mining(6-18h). I get notice about virtual memory, i tryed to set it to 16gb and 32gb, still crashing. I got 8gb of ram and
280x toxic, on stock it works ~840hashes (1150engine 1600mem), if i downclock to 1100engine, 1500mem it works 860 hashes and
i still get crash after like 12h.
This is the msg - GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory: Computer Properties / Advanced System Settings
/ Performance / Advanced / Virtual Memory

nope.

running 5 cards on 8.1, no problems.

it ran for 4-5 days before i restarted it.

have you modified your drivers?

Dogeshop_eu

member

Activity: 148

Merit: 10

Can windows 8.1 "see" 5 graphic cards? Modified drivers for win 7 dont work for me

Yanakitu Tenatako

sr. member

Activity: 328

Merit: 250

Quote from: renegadepcsolutions on July 02, 2014, 02:20:02 PM

Quote from: hero18688 on July 02, 2014, 03:30:14 AM

If you say so,it's not profitable to mine with 280x packed with elpida memory.
Why is that significantly important of memory type for cryptonight?

Elpida memory in general sucks ass for mining.

You would need a stilt bios flash to fix it.

Elpida has shitty timings, that's all.

I had not even a bit of problems with cards 280x with elpida running LTC rig.
They were better than hynix.
But this is different.

renegadepcsolutions

full member

Activity: 182

Merit: 100

Yeah... I mined your mom last night.

Quote from: hero18688 on July 02, 2014, 03:30:14 AM

If you say so,it's not profitable to mine with 280x packed with elpida memory.
Why is that significantly important of memory type for cryptonight?

Elpida memory in general sucks ass for mining.

You would need a stilt bios flash to fix it.

Elpida has shitty timings, that's all.

silvo

full member

Activity: 196

Merit: 100

8pool.dtdns.net OP

ehi guys,
like this?

New Monero Pool for CPU/GPU

xmr.darktech.org port 3333,5555,7777

EU server

super stable, vardiff, fast retarget, 0.8%fee and No transfer fee

Start mining Now!!!!!!

Settings for CPU and GPU are in GETTING STARTED

mining configuration ex:

Code:

 minerd -a cryptonight -o stratum+tcp://xmr.darktech.org:3333 -u address -p x

New Features in next days!

runra

newbie

Activity: 21

Merit: 0

Quote from: wacko on July 02, 2014, 12:08:00 PM

Quote from: grendel25 on July 02, 2014, 10:32:01 AM

I underclocked my toxic core and other cards mem to 1500. oc'd core on asus and saph vapor x.. ended up gaining about 130 h/s. 4 card rig at 1933 h/s.

What memory do your cards have, Hynix or Elpida?

i think his card memory is hynix all. because elpida 280x max speed about 400h/s/card

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 268. (Read 2145040 times)