Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 46. (Read 2145056 times)

this thread is talking about cryptonight, and I am talking about mining cryptonight algo.
The coin I mine now is ETN (Electroneum), not ETH.

If you are using RX550, I suggest you try sgminer 5.5.5-gm, mining Electroneum,
or mine with NiceHack if you still trust NiceHack.
Try to tune to over 300H/s per card.

The following is the screenshot, GPU0 is onboard VGA being disabled, and GPU1-3 are RX550 2GB Saphhire pulse.
GPU 1 is 640 SP, so use 350.
GPU 2,3 are 512 SP, so use 280.
Each GPU config 2 threads.

If you are using 4GB version, I think you will not get much advantage over the 2GB version, not even more than 5% I think.


sgminer 5.5.5-gm-nicehash-8 - Started: [2018-01-08 13:39:19] - [0 days 01:46:33]
--------------------------------------------------------------------------------
(5s):916.7 (avg):947.1h/s | A:6580011  R:20000  HW:0  WU:7331.954/m
ST: 1  SS: 0  NB: 118  LW: 10171  GF: 0  RF: 0
Connected to *********** (stratum) diff  as user *****
Block: 9f12d511...  Diff:5.51G  Started: [15:24:45]  Best share: 35.4M
--------------------------------------------------------------------------------
[P]ool management [G]PU management (S)ettings [D]isplay options [Q]uit
GPU 0:   9.0C         | OFF   / 0.000h/s | R:  0.0% HW:0 WU: 0.000/m rI: 32
GPU 1:  51.0C  931RPM |  312.3/ 313.0h/s | R:  0.9% HW:0 WU:2553.692/m rI:350
GPU 2:  60.0C  964RPM |  316.8/ 317.5h/s | R:  0.0% HW:0 WU:2373.993/m rI:280
GPU 3:  71.0C  991RPM |  317.5/ 317.5h/s | R:  0.0% HW:0 WU:2448.977/m rI:280
--------------------------------------------------------------------------------
[15:23:27] Accepted 02bbdb01 Diff 24K/20K GPU 2
[15:23:56] Accepted 5021c5f0 Diff 209K/20K GPU 3
[15:23:59] Accepted 01b75a5f Diff 38.2K/20K GPU 1
[15:24:01] Accepted 026cc3f2 Diff 27K/20K GPU 3
[15:24:03] Accepted 16f362c7 Diff 731K/20K GPU 2
[15:24:11] Accepted 1f8c7900 Diff 532K/20K GPU 2
[15:24:27] Accepted 019cadd3 Diff 40.7K/20K GPU 1
[15:25:10] Accepted 031e6a98 Diff 21K/20K GPU 2
[15:25:19] Accepted 03374887 Diff 20.4K/20K GPU 3
[15:25:33] Accepted 02b7efa8 Diff 24.1K/20K GPU 3
[15:25:52] Accepted 02555c07 Diff 28.1K/20K GPU 3

let me know what coin you minner with sgminer-gm?
i already using sgminer 5.5.5-gm to mining eth. its seem running slowly then claymore.

in sgm speed 7mh but claymore 10mh. but claymore hang on my rig

Bios mod with Ubermix straps, run perhaps 1900MHz memory, maybe higher. Can get 900+

Looks like so, but there was only 1 such case since i've moved to 11.2 (some rigs with 2GB RAM still runs 10.2, so i can compare).

Claymore, can it be easily done to return compatibility with 2GB RAM? Currently 11.x gives half of hashrate on such builds while 10.2 ran at full speed

Maybe u got problem and u dont know where In 1,5 year I have never (Knock knock) had a problem with Claymore miners..

I always had the problems with Claymore (for ZEC or for Cryptonight) and Radeon 280, 280X. The system was unstable, GPU hangs and after hard reboot I had a driver issues.

I reduce overclock of all my card to the minimum or ever stock level. Nothing. The system is freezing (GPU hangs) once a day.

Then I just installed GGS miner and voila, the system is stable, never freeze, never GPU hangs. And if I overclock a GPU too much, it just report a incorrect shares - I reduce overclock and in continue to work, without freezing the system completely.

Just my story.

Hi Claymore.

I have a Rig with 6 ati Rx570 from saphire. I have been minning ethereum with you miner version 10.2 and it is working fine, but tried minning electroneum ( monero) with 10.2 and with the latest version and have a error... with version 9.7 mines ok, but is giving errors on the dev fee says it cant connect. But no crashes on the miner...
I have the folowing error:
GPU 1, GpuMiner dk2an0 failed -4
- this one randomly on all gpu 2 at a time, starts to mine and the  the miner crashes and restarts.
Is says i am making 700 hs on each card ( 9.7 makes 620 about that...)
The cards only have the bios mod for eth ( the 1500 strap to above) They are stable on ethereum...

Claymore CryptoNote AMD GPU Miner v11.2 - POOL
 This is my start.bat

NsGpuCNMiner.exe -xpool stratum+ssl://etn-eu1.nanopool.org:13433 -xwal my etnadress.RIG_ATI/myemail -xpsw x -allpools 1

Can you or any one help.
Best regards.

I use sgminer 5.5.5-gm, 3x RX550 2GB, total 960H/s, no devfee.

stock setting without overclock / undervolt.

anybody work with rx550 ddr5 4gb? working smoothly with rx580. but running rx550 hang on start claymore

Samsung GDDR5 - 4GB.

Interesting thing is of the 3 cards, 2 have Crossfire enabled and one has it disabled.
What should it be?

When I clock is currently with afterburner, just clocking the memory, as soon as the miner
connects to the pool the rig crashes and the OS becomes unresponsive.  I'm on Win10.

Bios mod card. What memory type?

Anybody know what I can do to improve performance in my rig

Have 3 x RX570 4GB.  Am running v 11.2 with the -h set to 896.
Card is clocked to 1350 (1250 is standard) and the miner never seems to get it to rin over the 1200Mhz range.
I chance the -h to 1400 and increase the Mem clock on the card but this just crashed the rig.
There are not other options set in my config file.
I'm getting 670 H/s on each card currently.

I have the latest blockchain drivers installed, catalyst 15.2 and afterburner.

Thanks

hi claymore, i've a little issue that makes me crazy

i'm using version 11.2 and when an error occurs with the pool (nicehash) ,immediately gpu 0 crashes , and only gpu 0 on allmost all my rigs

Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Internalservererror"}}
Stratum - reading socket failed 10038, disconnect
XMR: Job timeout, disconnect, retry in 20 sec...

need to reboot rigs, reapplying OC to gpu 0 doesn't help, i mean mining wont start again without rebooting

note that no GPU0 crashes if i unplug and plug manually the ethernet cable

-h switch controls the memory usage too so it should probably be -h 1800 on the other side of your image but it'll be something else like an intensity setting or clock speed perhaps.

I use the RX580 8GB graphics card. Why is version 10.2 more memory than version 11?

Version 11 speed is very low. And I used the -h command, and it does not help speed up the speed.


Below is a sample image.

https://www.picz.in.th/images/2018/01/07/26695477_1558341427567618_621453770_o.png

Dotachin, I am having this exact problem and it wiped out 4 of my 6-GPU rigs just now, which is killing my effective hashrate. I'm also on NiceHash like you. Does updating to 11.2 fix it? In which case I'll move all rigs to that now - most of mine are on 10.2 and 11.0.

Hi all

excuse me for asking about an older version, the 9.7 since i am using Caymen vga cards

 Claymore 9.7 doesn't recognize Electroneum wallet addresses

can this be tweaked or solved ?

Thanks in advance

any version above 9.7 gives the below errors which i couldn't solve also
"No ASM binary found for GPU 0"


Solved: i had to include -allpools 1 in start.bat

Check history file within release

(Edited post cause i misunderstood you at first)

Hello guys, I've missed a few versions. Is Claymore hosting an update/version log anywhere? I'd like to know if it's worth the hassle for me to update my miners with the latest version at all.

There seems to be a problem with this version.

My Setup:

2x Sapphire Nitro+ RX580 4GB (1375/2000)
Beta Blockchain Driver Aug23

My Result / Claymore 11.2

980h/315h

My Result / Claymore 10.2

910h/910h

Hmmmm.. Anyone else got it like this??

Update #1

Drivers 17.12.2 + Claymore 11.2

503h/339h

Drivers 17.12.2 + Claymore 10.2

888h/894h (very inconsistent tho)

Update #2

Did a fresh/clean install of Beta Blockchain Drivers and testd 11.2 again:

971h/967h

Dont ask my why what how... but it works now.

Update #3

After restarting it went back to 980h/315h

Not sure whats up with that.