Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 49. (Read 2145056 times)

C:\Users\John Doe\Desktop\NANOPool>EthDcrMiner64.exe -epool eth-us-west1.nanopool.org:9999 -ewal XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.Rig1/XXXXXXXXXXXXXXXX -epsw x -mode 1 -tstop 95

╔════════════════════════════════════════════════════════════════╗
║     Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.0      ║
╚════════════════════════════════════════════════════════════════╝

ETH: 5 pools are specified
Main Ethereum pool is eth-us-west1.nanopool.org:9999
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
CUDA initializing...

NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 9.1/8.0
GPU #0: GeForce GTX 980 Ti, 6144 MB available, 22 compute units, capability: 5.2

Total cards: 1
ETH: Stratum - connecting to 'eth-us-west1.nanopool.org' <207.246.100.198> port 9999
ETH: Stratum - Connected (eth-us-west1.nanopool.org:9999)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Authorized
Setting DAG epoch #161...
Setting DAG epoch #161 for GPU0
Create GPU buffer for GPU0
GPU0 DAG creation time - 5832 ms
Setting DAG epoch #161 for GPU0 done
ETH: 01/01/18-15:14:14 - New job from eth-us-west1.nanopool.org:9999
ETH - Total Speed: 1.844 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 1.844 Mh/s
GPU 0, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
GPU 0, GpuMiner kx failed 1
GPU 0 failed
GPU 0, GpuMiner cu_k1 failed 6, the launch timed out and was terminated
GPU 0, GpuMiner kx failed 1
GPU 0 failed
ETH: 01/01/18-15:14:56 - New job from eth-us-west1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
GPU0 t=61C fan=22%
WATCHDOG: GPU error, you need to restart miner
Restarting OK, exit...

v11.2:

- added workaround for bug in Adrenalin drivers (failed fan/temperature management).
- changed default settings for Fiji chips.

Please let me know if this workaround works properly because I did not test it much yet. I will apply it for other miners too because it seems we can wait a fix from AMD for ages.

claymore version 12.6 equiashe kindly you should fix it to decrease the devfee, and if you could try to improve
we have been waiting months

That's AMD... Ok I will create a workaround, it will take 1-2 days.

Allready a month has passed. Maybe it's time to stop waiting AMD and find some workaround? It's the great chance that this AMD bug will stay a long time...

Pls mister Claymore include RX 550 support (lexa) ; i have a lot of them and i get 420h/s with 9.7
i want more than maximum 10 gpu per sistem; and hopefully a little speed bump

No. Fix from AMD is required, we have to wait it. Or I will have to do their job again and find some workaround.

Is 11.1 can handle fan/temp/clocks info/control with new adrenalin 17.12.x drivers?

Is this the same as the one you posted earlier (updated) or is 11.1 different?

Anyone know why this can be?

XMR - Total Speed: 5537 H/s, Total Shares: 1(0+1+0+0+0+0), Rejected: 0, Time: 00:00
XMR: GPU0 953 H/s, GPU1 953 H/s, GPU2 954 H/s, GPU3 770 H/s, GPU4 954 H/s, GPU5 953 H/s

Note the 770 (will go to 0 aswell), all same cards, all same bios all same clocks. With claymore 9.7 all fine. Anyone has an idea on how to crank this one up aswell?

v11.1

- fixed issue with stale shares, now effective hashrate must be higher.
- a few minor improvements.

PS. Linux version will be available in a few days.

There's an issue with nicehash causing segmentation fault under Linux. I've had to stop using your miner because of it.

v11.1

- fixed issue with stale shares, now effective hashrate must be higher.
- a few minor improvements.

PS. Linux version will be available in a few days.