With eth + pasc. I noticed that the -dcri can not be identical to that of the eth + sia.
With eth + sia I had to regulate -dcri 24 not to lose eth hashrate.
But with pasc I settled -dcri 15.
If I put 24, I lose eth hashrate
What setting have you set?
With eth + sia I had to regulate -dcri 24 not to lose eth hashrate.
But with pasc I settled -dcri 15.
If I put 24, I lose eth hashrate
What setting have you set?
dcri 15 is too low at that rate its beter to mine dc for me at least by my calculations
dcri 17 or 18 is what i used on rx 470 , drops me from 29.3 mhs to 27.8 but gets 230 or so pascal
on rx 480 i use dcri 18 or 19 . drops me from 29.7 mhs to 28.8 and i get 350 pascal < champ
on my nanos i used dcri 43 to get the nomal 28mhs eth and 600 or so pascal
per rig i lose btw 8-10mhs of eth and use a bit more power but pascal is more profiltable/shrug
for dcred i could use 24 dcri on my rx rigs uniformly and 75 dcri on my nanos pascal definatly needs more fine tuning
