Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1008.

AriesIV10

legendary

Activity: 1260

Merit: 1006

Mine for a Bit

Quote from: nu1mlock on February 24, 2017, 05:22:53 PM

Quote from: Swiped on February 24, 2017, 01:58:33 PM

I have the exact same results on 3 rigs just like yours. Anything over 20 for Pasc reduces Eth production. Runs stable, but not sure mining Pasc is any better than any other alt coin. Up until now, I have mined DCR, but I have not done the math yet to see which one has the highest profitability. Anyone done the math on which alt coin is paying out the best based on their production rates?

And I'm in a whole different situation. I also have an RX 480 (though 4GB) but I can't get it mining ETH above 22 MH/s. It doesn't matter if it's mining ETH only or ETH+PASC (or anything else). I can get 22 MH/s ETH + 400 PASC without going below 22 MH/s (at -dcri 36) but I can't get ETH mining higher.

Any ideas?

Edit: Not even overclocking helps. Still stuck at 22 MH/s.

First If you have a Hynix chip, use a 1500 strap. If you have a Samsung chip, use a 1750 strap.
Then set your settings ot 1980 and 1275. This will get you 27MHs. This is the most efficient, but you can go higher with the 1980 and 1275 for more MHs.

Hope this helps.

shadowhlohavec

full member

Activity: 207

Merit: 100

NoizChain

Msi Gaming rx 480 4gb samsung hashing - 24.5 eth 365 pasc no bios mod, no overclocking, 160W in msi afterburner

Thanks Claymore

mettalmag

legendary

Activity: 1084

Merit: 1003

≡v≡

Quote from: adaseb on February 24, 2017, 05:43:49 PM

Quote from: mettalmag on February 24, 2017, 05:31:52 PM

Quote from: adaseb on February 24, 2017, 05:29:32 PM

Suprisingly the 2GB cards still are working for ETH.

However they are SLOW due to DAG slowdown with the Tahiti and Pitcairn.

are they ? I was trying to mine with 2 gb cards 2-3 weeks ago with no luck.
I was missing something in config ?

It works in one of my rigs and not the other. Something to do with which slot the 2GB is in or which Windwos you are using or which driver. They do work, however the 270x hashes at like 11MH/s. Very slow

The Tahiti is very slow also like 15MH/s.

I don't want to mess with it anyway only one rig is with 2GB cards out of 96 and mining ZEC

and still what is the often cause of GPU hanging in openCL error ?

adaseb

legendary

Activity: 3808

Merit: 1723

Quote from: mettalmag on February 24, 2017, 05:31:52 PM

Quote from: adaseb on February 24, 2017, 05:29:32 PM

Suprisingly the 2GB cards still are working for ETH.

However they are SLOW due to DAG slowdown with the Tahiti and Pitcairn.

are they ? I was trying to mine with 2 gb cards 2-3 weeks ago with no luck.
I was missing something in config ?

It works in one of my rigs and not the other. Something to do with which slot the 2GB is in or which Windwos you are using or which driver. They do work, however the 270x hashes at like 11MH/s. Very slow

The Tahiti is very slow also like 15MH/s.

mettalmag

legendary

Activity: 1084

Merit: 1003

≡v≡

Quote from: adaseb on February 24, 2017, 05:29:32 PM

Suprisingly the 2GB cards still are working for ETH.

However they are SLOW due to DAG slowdown with the Tahiti and Pitcairn.

are they ? I was trying to mine with 2 gb cards 2-3 weeks ago with no luck.
I was missing something in config ?

adaseb

legendary

Activity: 3808

Merit: 1723

Suprisingly the 2GB cards still are working for ETH.

However they are SLOW due to DAG slowdown with the Tahiti and Pitcairn.

nu1mlock

sr. member

Activity: 378

Merit: 250

Quote from: Swiped on February 24, 2017, 01:58:33 PM

I have the exact same results on 3 rigs just like yours. Anything over 20 for Pasc reduces Eth production. Runs stable, but not sure mining Pasc is any better than any other alt coin. Up until now, I have mined DCR, but I have not done the math yet to see which one has the highest profitability. Anyone done the math on which alt coin is paying out the best based on their production rates?

And I'm in a whole different situation. I also have an RX 480 (though 4GB) but I can't get it mining ETH above 22 MH/s. It doesn't matter if it's mining ETH only or ETH+PASC (or anything else). I can get 22 MH/s ETH + 400 PASC without going below 22 MH/s (at -dcri 36) but I can't get ETH mining higher.

Any ideas?

Edit: Not even overclocking helps. Still stuck at 22 MH/s.

mettalmag

legendary

Activity: 1084

Merit: 1003

≡v≡

Quote from: hupisom1 on February 24, 2017, 04:29:02 PM

Hello!

I use 3*rx470
1*270x
and 1*sappphire 380 2 gb elpida

3 weeks works very well (23mhs), but now 380 2gb hasrate 0.780 mhs ? (furmark stabel ) virtual nmemory 16gb , use asrock btc r2.0

What is the problem ?

2 gb VGA are unable to mine ETH any more as far as I know

hupisom1

newbie

Activity: 2

Merit: 0

Hello!

I use 3*rx470
1*270x
and 1*sappphire 380 2 gb elpida

3 weeks works very well (23mhs), but now 380 2gb hasrate 0.780 mhs ? (furmark stabel ) virtual nmemory 16gb , use asrock btc r2.0

What is the problem ?

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

Quote from: Arnoldent on February 24, 2017, 03:02:45 PM

What is the speed and power for R9 390 with ETH + PASC?

eth 28 pasc 393 @ dcri 28

sapphire 390 nitro stock (1040/1500)

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: Bops on February 24, 2017, 03:23:16 PM

Cards are so hot Cheesy

I dont do anything higer than 18 - 20 dcri while dual mining, anything else would overheat and shorten the lifespan of these cards

Bops

newbie

Activity: 14

Merit: 0

Cards are so hot Cheesy

Arnoldent

newbie

Activity: 64

Merit: 0

What is the speed and power for R9 390 with ETH + PASC?

Mister305

full member

Activity: 140

Merit: 100

Getting a big fluctuation doing dual eth/pasc . The pasc stays stable hash rate but the eth is jumping from 17-23 on a rx470 , maybe because not using 15.12 driver?

elgi76

member

Activity: 124

Merit: 10

Quote from: Swiped on February 24, 2017, 01:58:33 PM

Quote from: KaydenC on February 23, 2017, 01:48:58 PM

Rx 480 - 1125 core, 2000 mem, 1625 straps.

Dcr dual mine - Eth 28.5, DCR 570 (intensity 40)
Pasc dual mine - Eth 24.5, Pasc 370 (default intensity 30)
Pasc dual mine - Eth 28.1, Pasc 280 (intensity 20)

So far intensity 20 seems better

I have the exact same results on 3 rigs just like yours. Anything over 20 for Pasc reduces Eth production. Runs stable, but not sure mining Pasc is any better than any other alt coin. Up until now, I have mined DCR, but I have not done the math yet to see which one has the highest profitability. Anyone done the math on which alt coin is paying out the best based on their production rates?

with dcri 30 i have this :
http://whattomine.com/merged_coins/10-eth-pasc?utf8=%E2%9C%93&hr_eth=135.0&fee_eth=0.9&hr_pasc=2038.0&fee_pasc=1.0&p=1000.0&cost=0.1564&commit=Calculate

with dcri 25 i have this :
http://whattomine.com/merged_coins/10-eth-pasc?utf8=%E2%9C%93&hr_eth=144&fee_eth=0.9&hr_pasc=1800&fee_pasc=1.0&p=1000.0&cost=0.1564&commit=Calculate

with dcri 20 i have this :
http://whattomine.com/merged_coins/10-eth-pasc?utf8=%E2%9C%93&hr_eth=152&fee_eth=0.9&hr_pasc=1526&fee_pasc=1.0&p=990&cost=0.1564&commit=Calculate

For me 25 is the best choice.

Swiped

member

Activity: 100

Merit: 10

Quote from: KaydenC on February 23, 2017, 01:48:58 PM

Rx 480 - 1125 core, 2000 mem, 1625 straps.

Dcr dual mine - Eth 28.5, DCR 570 (intensity 40)
Pasc dual mine - Eth 24.5, Pasc 370 (default intensity 30)
Pasc dual mine - Eth 28.1, Pasc 280 (intensity 20)

So far intensity 20 seems better

I have the exact same results on 3 rigs just like yours. Anything over 20 for Pasc reduces Eth production. Runs stable, but not sure mining Pasc is any better than any other alt coin. Up until now, I have mined DCR, but I have not done the math yet to see which one has the highest profitability. Anyone done the math on which alt coin is paying out the best based on their production rates?

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: Marvell1 on February 24, 2017, 11:14:41 AM

Quote from: omshree on February 24, 2017, 10:27:48 AM

Be careful with r9 nanos and power limit on this one

Melting cables like chocolate if anything over 10.

lol yeah i noticted that too on my nanos but the nano is a beast at dual mining which is why i kept all 36 of mine

the nanos can do 23.5 eth and 800 DCR at 750 watts TOTAL machine or around 130 watt per card with 800 core and 300 mem -100 undervolt

jst tested pascal with DCRi 48 and they are doing 23.2 eth and 550 pascal thats 146 watts per card. which is crazy profitable considering they do solo pacasl at 800 normaly

R9 Nanos are such beasts , wish i had more instead of the mix of around 200 470s i have.

The rX 480 8 GB cards are no slouch either 29.8 eth and 320 pascal for 150 wattts or so with -16 mv undervolt

470s are pretty weak for eth pascal though consume alot of power relative to thier hash and eth hashrate drops alot

Interesting. I cant push my 480 at all, they are stuck at 28, but able to reach 30+ with decred.
Thats with pasc -dcri 10. With -dcri 30 eth goes down to 24.

280x on the other hand can take high dcri levels without loosing eth hashrate - stronger core.
Edit: Actually it can only go to high dcri on ETH/ETC - on exp is has to be reduced as well.

yuslav

member

Activity: 112

Merit: 10

of 7.4 is no different - only pascal))

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: Lastmoadman on February 24, 2017, 12:38:48 PM

Quote from: Marvell1 on February 24, 2017, 11:14:41 AM

Quote from: omshree on February 24, 2017, 10:27:48 AM

Be careful with r9 nanos and power limit on this one

Melting cables like chocolate if anything over 10.

lol yeah i noticted that too on my nanos but the nano is a beast at dual mining which is why i kept all 36 of mine

the nanos can do 23.5 eth and 800 DCR at 750 watts TOTAL machine or around 130 watt per card with 800 core and 300 mem -100 undervolt

jst tested pascal with DCRi 48 and they are doing 23.2 eth and 550 pascal thats 146 watts per card. which is crazy profitable considering they do solo pacasl at 800 normaly

R9 Nanos are such beasts , wish i had more instead of the mix of around 200 470s i have.

The rX 480 8 GB cards are no slouch either 29.8 eth and 320 pascal for 150 wattts or so with -16 mv undervolt

470s are pretty weak for eth pascal though consume alot of power relative to thier hash and eth hashrate drops alot

Do you use two separate miners for Eth and Pascal?

er no why would i claymore does both thats what this thread is talking about, a single miner for both algos

Lastmoadman

newbie

Activity: 27

Merit: 0

Quote from: Marvell1 on February 24, 2017, 11:14:41 AM

Quote from: omshree on February 24, 2017, 10:27:48 AM

Be careful with r9 nanos and power limit on this one

Melting cables like chocolate if anything over 10.

lol yeah i noticted that too on my nanos but the nano is a beast at dual mining which is why i kept all 36 of mine

the nanos can do 23.5 eth and 800 DCR at 750 watts TOTAL machine or around 130 watt per card with 800 core and 300 mem -100 undervolt

jst tested pascal with DCRi 48 and they are doing 23.2 eth and 550 pascal thats 146 watts per card. which is crazy profitable considering they do solo pacasl at 800 normaly

R9 Nanos are such beasts , wish i had more instead of the mix of around 200 470s i have.

The rX 480 8 GB cards are no slouch either 29.8 eth and 320 pascal for 150 wattts or so with -16 mv undervolt

470s are pretty weak for eth pascal though consume alot of power relative to thier hash and eth hashrate drops alot

Do you use two separate miners for Eth and Pascal?

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1008. (Read 6590718 times)