Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1010.

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

Quote from: brizio71 on February 24, 2017, 03:28:40 AM

Quote from: deadsix on February 23, 2017, 05:18:31 PM

On my low power bios modded RX 470 4GB cards, the best setting is DCRI 17/18
I get ETH 26 and PASC 240 per card, each card drawing about 105W at the wall.

What kind of RX470 do u have ?
what kind of low power bios are u using ?

thx

I am pretty sure its not 105W at the wall while dual mining. He is most likely looking at his GPU-z wattage. I think it uses 150W or so.

brizio71

sr. member

Activity: 456

Merit: 250

Blockchain Just Entered The Real World

Quote from: deadsix on February 23, 2017, 05:18:31 PM

On my low power bios modded RX 470 4GB cards, the best setting is DCRI 17/18
I get ETH 26 and PASC 240 per card, each card drawing about 105W at the wall.

What kind of RX470 do u have ?
what kind of low power bios are u using ?

thx

reelen

full member

Activity: 189

Merit: 100

Power consumption is pretty heavy at default Pasc -dcri. Careful if you run a tight ship with your PSUs.

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

Well ZEC mining for the Tahiti's is pretty bad right now.

I might try EXP mining on the 280X with Pascal dual mining.

However something tells me the power consumption will be in the Litecoin mining territory, pretty much like this video

https://www.youtube.com/watch?v=DUvUmo8dBmU

2 of the R9 280X consuming 700 Watts at the wall.

suklee

member

Activity: 67

Merit: 10

Quote from: Dowper on February 23, 2017, 07:25:19 AM

Quote from: mettalmag on February 23, 2017, 07:20:25 AM

Quote from: toliksol on February 23, 2017, 07:11:53 AM

Quote from: Blamsud on February 23, 2017, 06:47:56 AM

Quote from: suklee on February 23, 2017, 02:49:38 AM

Quote from: mettalmag on February 22, 2017, 05:56:40 PM

Quote from: gametech0101 on February 22, 2017, 05:41:04 PM

For ETH or for ZEC?

why would he post in ETH topit if it is for ZEC?

^

Anyone switching back to Eth (from ZEC?) Price of ZEC really gone down lately

I went back to ETH.

Look to the difficulty chart https://etherscan.io/chart/difficulty I think that many many people went back to the ETH

I did it month ago

Me too, I don't understand why anybody would mine ZEC with polaris gpus...

Well sh*t, perfect time to move back to Eth with the release of 8.0... (thanks Claymore!)

I go on a trip for 3 weeks and things change so drastically in the crypto world, lol.

louisnguyen171

newbie

Activity: 15

Merit: 0

Nothing change. (i'm using v7.4)

Almaszzz

newbie

Activity: 3

Merit: 0

Quote from: naeme18720 on February 23, 2017, 01:44:13 PM

Quote from: Almaszzz on February 23, 2017, 01:32:02 PM

Sapphire RX470 core 1170, memory 2140
ETH: GPU0 27.734 Mh/s
PASC: GPU0 277.342 Mh/s

Sapphire RX470 4gb or 8gb???

4Gb

grimjaw

newbie

Activity: 10

Merit: 0

Hi, I am having a problem with my rigs, not sure whether it's the mobo/ram/psu/miner.
My setup is as below;

H61 btc pro
3* r9 290 with usb powered riser
aerocool kcas 600 watt(powering the risers,mobo, and gpu 1)
2 other psu each powering each card (to eliminate psu issues)

What the problem is I cant get the gpu to run on higher cclock. No matter what I put on MSI AFTERBURNER it still runs at stock clock speed (947Mhz).

So my question is, is there any other choice to get it runs at higher clock speed? e.g -cclock options from bat file? anyone tried this?

fr4nkthetank

legendary

Activity: 2294

Merit: 1182

Now the money is free, and so the people will be

Quote from: Marvell1 on February 23, 2017, 07:28:01 PM

Quote from: fr4nkthetank on February 23, 2017, 02:40:48 PM

well a fury gets 30.5 and 600mhs, which is good. 470 gets 27mhs and 270mhs. unfortunately, power consumption is through the roofffffffffffffffffffff
inb4 rig problems

I wrote a small piece on it, see my website if you want.

Higer than ETH dcr ?

actually if I remember well, DCR was setting the roof on fire, pascal is below I think. On a RX470, adding Pascal to ETH ads 25 to 30w more at the wall.

reelen

full member

Activity: 189

Merit: 100

Quote from: yslyung on February 23, 2017, 05:38:13 PM

please dont mine at nano for pascal.

yeah dont quote the whole post man.

so far no improvements on eth as far as my tests goes.

after new settings, reboot your rigs before running.

let's see what comes next.

Why not use Nanopool for Pasc?

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: fr4nkthetank on February 23, 2017, 02:40:48 PM

well a fury gets 30.5 and 600mhs, which is good. 470 gets 27mhs and 270mhs. unfortunately, power consumption is through the roofffffffffffffffffffff
inb4 rig problems

I wrote a small piece on it, see my website if you want.

Higer than ETH dcr ?

mettalmag

legendary

Activity: 1084

Merit: 1003

≡v≡

I still don't understand the need of -nofee option.
Can someone share dual mining config ?

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: marvykkio on February 23, 2017, 03:23:58 PM

Quote from: Biodom on February 23, 2017, 03:07:21 PM

Quote from: toliksol on February 23, 2017, 03:02:03 PM

Quote from: Biodom on February 23, 2017, 02:53:39 PM

Quote from: marvykkio on February 23, 2017, 02:45:58 PM

I have not seen additional speed for eth
12 x 470 8g
Cry

@marvykkio

what are your core and mem settings for these? with or without modded bios?
thanks

My mining speed is the same as 7.4 - 29.3mh (RX480 core 1150 mem 2100)

thanks, but i really want to know about RX 470 8gb.
1100/1950?

core clock 1260
memory clock 2100
power limit + 13
core voltage -12
fan speed 70%
intensity 20

1100 mv

@marvikkio
Thanks, not sure that I can use these with a modded bios, though.

mettalmag

legendary

Activity: 1084

Merit: 1003

≡v≡

Quote from: marvykkio on February 23, 2017, 04:16:55 PM

claymore you can have a speed of eth bit, or we are already within the limits? Kiss

some report that it got a bit higher

coinzoid

sr. member

Activity: 476

Merit: 250

I've switched from 7.3 to 8.0 and no improvements in terms of hash rate for my Rx 480 nitros. I'm getting 29.3 with low power bios.
Shall I enable dual mining (ETH + Pascal)?

powershot

newbie

Activity: 59

Merit: 0

Quote from: powershot on February 23, 2017, 02:49:28 PM

Hi everyone..
I have a ZCash / Zclassic / Nicehahsh mining problem with Claymore (Claymore 8.0.7)

A Gpu of my RIG with R9 280x, (1002 6798 - 1458 2279) Gigabyte WindForce
AMD DRIVER 15.xx

https://i.imgur.com/koMlUu3.png
https://i.imgur.com/BXPGYDY.png

Temps With Pascal miner - sometimes take 78ºC - 35ºC Environment.
I did Underclocking my bios memory clock from 1500 mhz to 1400 Mhz, Gpu Clock from 1000 Mhz to 800 Mhz, Volts standard, I tried setting below standards but it did not stay stable.

I have stable mining, ETH / PASC, but with Claymore (ZEC) or NiceHash, crash.

Please, any help?

Has anyone ever experienced this ?
Any idea ?

yslyung

legendary

Activity: 1500

Merit: 1002

Mine Mine Mine

please dont mine at nano for pascal.

yeah dont quote the whole post man.

so far no improvements on eth as far as my tests goes.

after new settings, reboot your rigs before running.

let's see what comes next.

deadsix

hero member

Activity: 751

Merit: 517

Fail to plan, and you plan to fail.

On my low power bios modded RX 470 4GB cards, the best setting is DCRI 17/18
I get ETH 26 and PASC 240 per card, each card drawing about 105W at the wall.

mfsmarques

member

Activity: 65

Merit: 10

Quote from: New Minerr on February 23, 2017, 04:48:53 PM

Quote from: mfsmarques on February 23, 2017, 04:42:00 PM

Quote from: New Minerr on February 23, 2017, 04:27:07 PM

Quote from: Tasty Potato on February 23, 2017, 04:21:38 PM

Quote from: New Minerr on February 23, 2017, 04:05:05 PM

Quote from: Claymore on April 11, 2016, 11:30:36 AM

Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner.
=========================

Latest version v8.0:

- added new coin for dual mode: PASCAL(PASC). Now you can mine Ethereum, Ethereum+Decred, Ethereum+Siacoin, Ethereum+Lbry or Ethereum+Pascal. NOTE: Currently Pascal is not available for NVidia cards.
- added "-nofee" option.
- added ability to use environment variables in "epools.txt", "dpools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt.
- added "License.txt" file.
- some minor improvements.

LINKS:

GOOGLE: https://drive.google.com/open?id=0B69wv2iqszefdFZUV2toUG5HdlU
MEGA: https://mega.nz/#F!O4YA2JgD!n2b4iSHQDruEsYUvTQP5_w

...

Hi clay

I mine dual eth and pasc. But i cant see pasc my hash on nanopool. Are there any problem with mining program?

Of course, because you quoted the whole post and you've got a problem for that! /sarcasm/

I dont see problems at the moment with new version. And I always triple check myself. Considering Claymore makes it /miners/ for years now. Just check your address and stuff. I betcha.

And please don't quote the whole post, God!

Sorry for that my bat file is
-epool eu1-etc.ethermine.org:4444 -ewal 0x88dc1d2a51329bc212baeb531b71f9a670709245 -epsw x -dpool stratum+tcp://pasc-eu1.nanopool.org:15555 -dwal 86646-64.a4b5e798b204ff48.rig2 -dpsw x -dbg -1 -dcri 35 -allpools 1 -allcoins 1

Do you see any problem?

Add -dcoin pasc

I added but my eth speed was 27.9 after added dcoin my speed 24.3

Yes, using dual the eth rate will drop, use -dcri 1, 10, 20, 30, 40 to test

Arny11

newbie

Activity: 50

Merit: 0

Use -dcri parameter (not 35) Use 20 or 15 or 10 or 1

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1010. (Read 6590565 times)