Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1108. (Read 6590718 times)

Thanks!
waiting for new version (16 card)
the test results I will inform

Wow, 11 GPUs. Miner supports only 10 max. Ok I will fix it in next update (hope 16 will be enough) but note that you won't be able to use some options, for example, there is no way to specify card #10 in "-di" option, disable GPU #10 from keyboard etc.

UBUNTU 14.04 15.12
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

08:37:47:144    98bbf780        �        Claymore's Dual ETH + DCR/SC/LBC GPU Miner v7.1         �
08:37:47:144    98bbf780        ����������������������������������������������������������������ͼ
08:37:47:144    98bbf780
08:37:47:344    98bbf780        ETH: 1 pool is specified
08:37:47:344    98bbf780        Main Ethereum pool is eu1.ethpool.org:3333
08:38:04:210    98bbf780        OpenCL platform: AMD Accelerated Parallel Processing
08:38:04:210    98bbf780        OpenCL initializing...

08:38:04:210    98bbf780        AMD Cards available: 11
08:38:04:210    98bbf780        GPU #0: Tonga, 4045 MB available, 32 compute units
08:38:04:210    98bbf780        GPU #1: Tonga, 4045 MB available, 32 compute units
08:38:04:210    98bbf780        GPU #2: Tonga, 4045 MB available, 32 compute units
08:38:04:210    98bbf780        GPU #3: Tonga, 4045 MB available, 32 compute units
08:38:04:210    98bbf780        GPU #4: Tonga, 4045 MB available, 32 compute units
08:38:04:210    98bbf780        GPU #5: Tonga, 4045 MB available, 32 compute units
08:38:04:210    98bbf780        GPU #6: Tonga, 4045 MB available, 32 compute units
08:38:04:210    98bbf780        GPU #7: Tonga, 4045 MB available, 32 compute units
08:38:04:210    98bbf780        GPU #8: Tonga, 4045 MB available, 32 compute units
08:38:04:210    98bbf780        GPU #9: Tonga, 4045 MB available, 32 compute units
08:38:04:210    98bbf780        GPU #10: Tonga, 4045 MB available, 32 compute units
08:38:04:210    98bbf780        POOL/SOLO version
08:38:04:210    98bbf780        b225
08:38:04:210    98bbf780        Platform: Linux
08:38:04:229    98bbf780        start building OpenCL program...
08:39:25:512    98bbf780        done
08:39:25:512    98bbf780        GPU #0: set -etha as 0 (ETH algo for fast cards)
08:39:25:512    98bbf780        GPU #1: set -etha as 0 (ETH algo for fast cards)
08:39:25:512    98bbf780        GPU #2: set -etha as 0 (ETH algo for fast cards)
08:39:25:512    98bbf780        GPU #3: set -etha as 0 (ETH algo for fast cards)
08:39:25:512    98bbf780        GPU #4: set -etha as 0 (ETH algo for fast cards)
08:39:25:512    98bbf780        GPU #5: set -etha as 0 (ETH algo for fast cards)
08:39:25:512    98bbf780        GPU #6: set -etha as 0 (ETH algo for fast cards)
08:39:25:512    98bbf780        GPU #7: set -etha as 0 (ETH algo for fast cards)
08:39:25:512    98bbf780        GPU #8: set -etha as 0 (ETH algo for fast cards)
08:39:25:512    98bbf780        GPU #9: set -etha as 0 (ETH algo for fast cards)
08:39:25:512    98bbf780        GPU #10: set -etha as 0 (ETH algo for fast cards)
08:39:25:513    98bbf780        cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
08:39:25:513    98bbf780        No NVIDIA CUDA GPUs detected.
08:39:25:513    98bbf780        Total cards: 11
08:39:25:564    98bbf780        ADL Initialization Error!
08:39:25:564    98bbf780        No NVIDIA cards in the list, NVML library will not be used.
08:39:25:566    4cfe9700        ETH: Stratum - connecting to 'eu1.ethpool.org' <108.61.166.37> port 3333
08:39:25:604    4cfe9700        send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x***************.TEST", "x"], "id": 2, "method": "eth_submitLogin"}

08:39:25:605    4cfe9700        ETH: Stratum - Connected (eu1.ethpool.org:3333)
08:39:25:645    4cfe9700        got 39 bytes
08:39:25:645    4cfe9700        buf: {"id":2,"jsonrpc":"2.0","result":true}

08:39:25:645    4cfe9700        parse packet: 38
08:39:25:645    4cfe9700        ETH: Authorized
08:39:25:645    4cfe9700        send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

08:39:25:645    4cfe9700        new buf size: 0
08:39:25:665    98bbf780        ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

08:39:25:666    98bbf780        ETH: eth-proxy stratum mode
08:39:25:666    98bbf780        Watchdog disabled
08:39:25:666    98bbf780        Remote management is enabled on port 3333
08:39:25:666    98bbf780

08:39:25:696    4cfe9700        got 248 bytes
08:39:25:696    4cfe9700        buf: {"id":3,"jsonrpc":"2.0","result":["0xc525143b2ef348e72f072db3c6853556e232d2d603f36c0da8b0c0809482cef5","0xb636872376ad54507f91f53e9c90b287e2025008319a884b8f37c3d1deb996a6","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x23a55d"]}

08:39:25:696    4cfe9700        parse packet: 247
08:39:25:696    4cfe9700        eth: job changed
08:39:25:696    4cfe9700        new buf size: 0
08:39:25:768    56ffd700        Setting DAG epoch #77...
08:39:27:792    56ffd700        Setting DAG epoch #77 for GPU #1
08:39:27:792    57fff700        Setting DAG epoch #77 for GPU #0
08:39:27:792    56ffd700        Create GPU buffer for GPU #1
08:39:27:792    547f8700        Setting DAG epoch #77 for GPU #3
08:39:27:792    52ff5700        Setting DAG epoch #77 for GPU #5
08:39:27:792    50ff1700        Setting DAG epoch #77 for GPU #7
08:39:27:792    51ff3700        Setting DAG epoch #77 for GPU #6
08:39:27:792    55ffb700        Setting DAG epoch #77 for GPU #2
08:39:27:792    547f8700        Create GPU buffer for GPU #3
08:39:27:792    4dfeb700        Setting DAG epoch #77 for GPU #10
08:39:27:793    4dfeb700        Create GPU buffer for GPU #10
Unhandled signal in divisionErrorHandler()
Aborted (core dumped)

It's a good idea to tell me how much % of shares are invalid, if it's <0.5% it's ok. If you want zero invalid shares - use "-etha 2" option. If it does not help - something is wrong with your GPU.

@claymore One of my systems has an AMD Pro Duo and I am getting invalid shares from GPU 1. It is not hot and not overclocked. Using Windows 7 64bit with crimson 16.9.2. I have reinstalled it a few times. Is there a setting in Claymore I can change that would effect this ? I am on 7.1.

You only send shares to a pool. In solo mining you do the job alone.

no mate you don't hit a block lol

8 GB Nitro use samsung. Others use hynix.
I want to ask something about solo mining to you. When solo mining Ionly see ''new job accepted''. If I see share accepted, I find a block. Is it right? Can you give more detail?

anyone know what memory brand sapphire is using for the card "SAPPHIRE Radeon RX 470 100407-4GOCL "?

yes, you will only see excepted shares when solo mining when you actually find a block.

@Claymore
I try mine solo with my rigs. I only use geth and I start it with ''geth.exe --rpc --rpcaddr "192.168.5.198" --rpcport 8545''  in  miner I just see new job accepted messages. I didn't see any share accepted or rejected messages. Is it working properly?

Linux version of the miner requires CUDA 8.


No proxy is required, see "SAMPLE USAGE" section for solo sample. Miner supports both geth and parity.

really. got a 16.9.2 right now and currently expected hash speed was way below what is expected.
what seems to be the problem with my rig? got a r9 390 and rx470 msi gpu

yes delete -etha2 from your config not need gets it's automatic

You must use  "-etha 2"  for your cards

1 drivers issue delete your drievers mate...and install again...?

2 you need r to give to your cards more power ?

3 batch has nothing to do but you don't need it mate

Hi, I am trying to setup a miner with 6 rx480 on windows10 using the latest version of Claymore's dual miner and crimson driver 16.9.1.

I have setup a very simple batch file to start mining on nanopool, but claymore crashes on startup.

The batch looks like

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1 -etha 0


Any idea of what it could be?
Thank you

It works fine with 16.9.1.

is there anyway that claymore dual miner supports the new driver updates? for the RX series cards release by AMD??
thanks for the software.

I decided I want to try solo mining with my rigs. Can somebody tell me what eth node is recommended, geth or parity ? And what proxy should I use for it that will work with claymore ? Or do I just point claymore's miner to local node address and everything will be fine/optimal ?