Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1103. (Read 6590718 times)

you can do the same on windows and it isn't to expensive since you can buy a POS tablet and use the product key from that, which you can get using slmgr or grab from the bios since they usually enable secure boot.

-logfile 0 do not working at 7.1

Is there any way to specify difficulty in dual mining?

Do you run the latest geth ? 1.4.14 ? If not, it's the reason, due to latest attacks against the network
You can find it here : https://github.com/ethereum/go-ethereum/releases

Man that's perfect! Thanks!

geth must show "imported 1 block" message a few times per minute. If it does not, that's the reason.

On the rigs that i have connected to the same network as my ETH Pool ( one PC running geth ) i get the
"No new jobs where received from the pool"  error

Screenshot

http://imgur.com/a/veWvW

its connected to the pool, it shows GPU temp but it wont start mining

any suggestions?

Prompt, volume memory like something affects the production of ET, it turned out that is worth 1GB. What will happen if you increase to 4GB?

The miner exits just after the "start building OpenCL program...".


That's it. BINGO!

Machine had only 2GB of RAM. Replacing a 1GB memory card for a 2GB one (3GB total) solved.

Thank you very much to everyone to replied.

Regards, Brusque

See it tempo on claymore, example Gpu1 65c, press 1 on your keyboard, it ill stop mining on it, go to msi afterburn search for a low temp card, stop it fans, profit

I have flashed my bios and 4 out of my 5 cards are running at 29mh but 1 is running at 18. Is there an easy way of identifying which physical card it is using the Claymore mining app (which is awesome btw!!!)?

I've had the same problem but with my RX480. My problem was that it needs more ram, I was with only 2GB, then put 2GB more and everything is OK. How much ram do you have?

Win7 or Win10 no difference for miner.


I will not do anything until this coin is released.


OpenCL reduced available memory for OpenCL applications on your system, usually it is related to environment variables and size of RAM installed.
But detecting 3GB instead of 4GB will not change your mining speed. So what's the problem?

Happened to me as well... reinstalling the driver solved. Make sure to use Wagnard DDU to uninstall the old drivers without leaving any trace, and use the new rx 470 driver alone..

Hi, Claymore!

Will you be adding the up-coming Zcash into your dual mining? They have a bounty of $30k for CPU and GPU miner.

Use two miner instances with different *.bat files. Use -di option to select needed gpus and -mport 0 option to disable monitoring errors when running 2 miners simultaneously.

Does anyone know if there's any way to mine two different secondary coins; for example, SIACOIN on my RX 480 cards, and LBRY on my 1070?

Hello everybody!

This is weird:

https://postimg.org/image/6jktdsfr9/

It's a RX 470 Red Dragon 4GB board on an old machine (that I use for tests) running Windows 10 and AMD 16.9.1 drivers.

Claymore recognizes correctly other boards like 4GB Tongas. But reports only 3072 MB on Ellesmeres.

I tried with 3 different models and other driver versions. Always same result.

Log file says:
11:51:33:253   f8   args: -allpools 1 -allcoins 1 -epool etc-eu.suprnova.cc:3333 -ewal brusque.labpc -epsw x -esm 3 -dpool sia.suprnova.cc:7777 -dwal brusque.labpc -dpsw x -dcoin sia -dcri 30
11:51:33:269   f8   
11:51:33:269   f8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
11:51:33:285   f8   º      Claymore's Dual ETH + DCR/SC/LBC GPU Miner v7.0 Beta      º
11:51:33:285   f8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
11:51:33:300   f8   
11:51:33:519   f8   ETH: 1 pool is specified
11:51:33:519   f8   Main Ethereum pool is etc-eu.suprnova.cc:3333
11:51:33:535   f8   SC: 1 pool is specified
11:51:33:550   f8   Main Siacoin pool is sia.suprnova.cc:7777
11:51:33:675   f8   OpenCL platform: AMD Accelerated Parallel Processing
11:51:33:706   f8   OpenCL initializing...

11:51:33:722   f8   AMD Cards available: 1
11:51:33:722   f8   GPU #0: Ellesmere, 3072 MB available, 32 compute units
11:51:33:738   f8   POOL/SOLO version
11:51:33:738   f8   b221
11:51:33:785   f8   start building OpenCL program...

Best regards!

Brusque

@ Claymore
Which windows Version is recommened for the Rx470?

It may not be a big deal if you have only a couple of rigs, but its very useful for managing large mining farms.

I have many rigs with different types of GPUs and several batches are with modded ROMs, and Win7, Win8.1, Win10 and a lone Linux build.

I had to use different levels of Crimson drivers (for modded and non-modded rom rigs) and keep an eye on temperature and power consumption/power bill.

In addition, I have added a few new rigs for XMR mining and new Ethman manages both ETH and XMR on a single dashboard, the dashboard is going to look very busy.

It will be useful to keep track of Crimson drivers in the dashboard so that one could continuously ensure each rig is at optimum performance, with lowest power consumption and safe temperature, with the correct drivers as when they are available.