@Claymore Which AMD driver should we use for AMD RX470s and RX480s on Windows?
I'm using 16.8.2 right now and everything is OK
Before was 16.7.2 - no any problems too
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1139. (Read 6590565 times)
September 02, 2016, 05:51:44 PM
I'm using 16.8.2 right now and everything is OK
Before was 16.7.2 - no any problems too
September 02, 2016, 05:38:53 PM
@Claymore Which AMD driver should we use for AMD RX470s and RX480s on Windows?
September 02, 2016, 04:33:46 PM
I'm working on some other coin, v7.0 will be released in a few days.
Eth + Lbry = Excellent
September 02, 2016, 03:08:25 PM
Claymore do you think Groelst or NooScrypt Can be added for dual mining?
GRS is dying. Do not add it to Claymore.
I'm working on some other coin, v7.0 will be released in a few days.
September 02, 2016, 02:27:05 PM
I have a strange issue. I mined with Claymore Dual GPU miner at nanopool.org.
I have submitted 11 shares with it but non is shown by the pool that they received it - its now 1h ago.
With gnoil it instantly shown in my stats...please what happened to my shares?
From the log...
13:33:19:180 1ed4 args: -epool eth-eu1.nanopool.org:9999 -ewal 0x1873d78519d4216a1e5f5xxx -r 0 -mode 1
13:33:19:181 1ed4
ETH: 09/02/16-14:05:00 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 22.215 Mh/s, Total Shares: 11, Rejected: 0, Time: 00:31
ETH: GPU0 22.250 Mh/s
13:59:44:152 2d9c ETH: GPU0 22.106 Mh/s
13:59:50:647 14fc ETH: put share nonce 1eb2d7e0042d33f5
13:59:50:647 14fc ETH round found 1 shares
13:59:50:648 2d9c ETH: 09/02/16-13:59:50 - SHARE FOUND - (GPU 0)
13:59:50:742 2d9c send: {"id":4,"method":"eth_submitWork","params":["0x1eb2d7e0042d33f5","0xb15ba24250ed9fe5ad4e62619c67fa21f9f3047c3fef5708a7104d74cc6c6a6b","0xede8c8540ae7d3eeca3f1bc2dc6b807983970f63281cc2381f81a74d2d16c17b"]}
13:59:50:796 2d9c got 39 bytes
13:59:50:796 2d9c buf: {"jsonrpc":"2.0","id":4,"result":true}
13:59:50:796 2d9c parse packet: 38
13:59:50:797 2d9c ETH: Share accepted (62 ms)!
I have submitted 11 shares with it but non is shown by the pool that they received it - its now 1h ago.
With gnoil it instantly shown in my stats...please what happened to my shares?
From the log...
13:33:19:180 1ed4 args: -epool eth-eu1.nanopool.org:9999 -ewal 0x1873d78519d4216a1e5f5xxx -r 0 -mode 1
13:33:19:181 1ed4
ETH: 09/02/16-14:05:00 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 22.215 Mh/s, Total Shares: 11, Rejected: 0, Time: 00:31
ETH: GPU0 22.250 Mh/s
13:59:44:152 2d9c ETH: GPU0 22.106 Mh/s
13:59:50:647 14fc ETH: put share nonce 1eb2d7e0042d33f5
13:59:50:647 14fc ETH round found 1 shares
13:59:50:648 2d9c ETH: 09/02/16-13:59:50 - SHARE FOUND - (GPU 0)
13:59:50:742 2d9c send: {"id":4,"method":"eth_submitWork","params":["0x1eb2d7e0042d33f5","0xb15ba24250ed9fe5ad4e62619c67fa21f9f3047c3fef5708a7104d74cc6c6a6b","0xede8c8540ae7d3eeca3f1bc2dc6b807983970f63281cc2381f81a74d2d16c17b"]}
13:59:50:796 2d9c got 39 bytes
13:59:50:796 2d9c buf: {"jsonrpc":"2.0","id":4,"result":true}
13:59:50:796 2d9c parse packet: 38
13:59:50:797 2d9c ETH: Share accepted (62 ms)!
NANOPOOL IS SLOW TO START--
If you have 11 shares, NanoPool got them. But, for a low hash rate like 22MH/s, the pool will take a while to show statistics. I do like the statitic display at NanoPool, it is clean and easy to understand. It takes up to 6 hours for your stats to really show correctly, even if you have a higher hash rate. --scryptr
September 02, 2016, 01:56:47 PM
Is there any way to make the miner mine totally automatically when the Windows 10 starts? Without even a single click?
Yes, there is. The best way I've found is to use a Scheduled Task. Press your start button, search for Task Scheduler, and create a new task. Set the trigger to run at logon, and set the action to be start a program. Then, just link to the Claymore executable. Store all your settings in the conf and pools text files, and you'll be good to go.If you need more detailed instructions than that, google "How to create a Scheduled Task in Windows 10"
put it in the startup folder. has to be a .bat file though.
Is there any way to make the miner mine totally automatically when the Windows 10 starts? Without even a single click?
1. Automatically login to Windows 10 when the computer boots.
https://www.cnet.com/how-to/automatically-log-in-to-your-windows-10-pc/
2. Use the claymore start.bat file to start Claymore. You need to make a shortcut on the bat file. Right click and say "send to" then send to "desktop (create shortcut)". Then go to run and type "shell:startup". Copy and paste the shortcut from your desktop into this folder.
http://www.computerhope.com/issues/ch000322.htm
Everyone, thanks a bunch! I'll surely try it. My country has the problem of load-shedding, most of you won't even recognize this word, but it's pretty common here. We've to live one whole hour without electricity after every three hours, have to use UPS or electrical generator within that hour. Pretty bad to bear that, specially in mining, have to start off the whole system after that hour.
September 02, 2016, 01:08:54 PM
Is there any way to make the miner mine totally automatically when the Windows 10 starts? Without even a single click?
1. Automatically login to Windows 10 when the computer boots.
https://www.cnet.com/how-to/automatically-log-in-to-your-windows-10-pc/
2. Use the claymore start.bat file to start Claymore. You need to make a shortcut on the bat file. Right click and say "send to" then send to "desktop (create shortcut)". Then go to run and type "shell:startup". Copy and paste the shortcut from your desktop into this folder.
http://www.computerhope.com/issues/ch000322.htm
September 02, 2016, 01:05:30 PM
Claymore do you think Groelst or NooScrypt Can be added for dual mining?
GRS is dying. Do not add it to Claymore.
September 02, 2016, 12:50:54 PM
Is there any way to make the miner mine totally automatically when the Windows 10 starts? Without even a single click?
Yes, there is. The best way I've found is to use a Scheduled Task. Press your start button, search for Task Scheduler, and create a new task. Set the trigger to run at logon, and set the action to be start a program. Then, just link to the Claymore executable. Store all your settings in the conf and pools text files, and you'll be good to go.If you need more detailed instructions than that, google "How to create a Scheduled Task in Windows 10"
September 02, 2016, 12:32:03 PM
put it in the startup folder. has to be a .bat file though.
September 02, 2016, 12:17:13 PM
Is there any way to make the miner mine totally automatically when the Windows 10 starts? Without even a single click?
September 02, 2016, 10:05:03 AM
Claymore do you think Groelst or NooScrypt Can be added for dual mining?
September 02, 2016, 09:21:23 AM
Well I started genoil miner and it is shown ..
instantly so nothing wrong with the pool.
Somehwere my processing power ended up but my shares didn't reach nanopool.org nor any other pool i have in the epool.txt. So please Claymore enlighten me where my shares are gone.
I can provide you the log.
instantly so nothing wrong with the pool.
Somehwere my processing power ended up but my shares didn't reach nanopool.org nor any other pool i have in the epool.txt. So please Claymore enlighten me where my shares are gone.
I can provide you the log.
September 02, 2016, 09:05:54 AM
nanopool with cdm is pretty much the same, shares show up within a couple minutes if not sooner.
i think somethings up with the website part of nanopool. says my last share was 11 hours ago but both my miners are still getting work and submitting shares that are accepted.
occasionally that happens to pools. web part and backend that does the work are different beasts., so one can go wonky while the other keeps trucking. the backend keeps track of shares while the frontend web part just displays it. so the shares are there, just not displayed, at least thats what ive seen in the past when stuff like this happens at other pools. might want to just wait it out. nanopool and cdm have been reliable for me months.
i think somethings up with the website part of nanopool. says my last share was 11 hours ago but both my miners are still getting work and submitting shares that are accepted.
occasionally that happens to pools. web part and backend that does the work are different beasts., so one can go wonky while the other keeps trucking. the backend keeps track of shares while the frontend web part just displays it. so the shares are there, just not displayed, at least thats what ive seen in the past when stuff like this happens at other pools. might want to just wait it out. nanopool and cdm have been reliable for me months.
September 02, 2016, 08:48:22 AM
I have a strange issue. I mined with Claymore Dual GPU miner at nanopool.org.
I have submitted 11 shares with it but non is shown by the pool that they received it - its now 1h ago.
With gnoil it instantly shown in my stats...please what happened to my shares?
From the log...
13:33:19:180 1ed4 args: -epool eth-eu1.nanopool.org:9999 -ewal 0x1873d78519d4216a1e5f5xxx -r 0 -mode 1
13:33:19:181 1ed4
ETH: 09/02/16-14:05:00 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 22.215 Mh/s, Total Shares: 11, Rejected: 0, Time: 00:31
ETH: GPU0 22.250 Mh/s
13:59:44:152 2d9c ETH: GPU0 22.106 Mh/s
13:59:50:647 14fc ETH: put share nonce 1eb2d7e0042d33f5
13:59:50:647 14fc ETH round found 1 shares
13:59:50:648 2d9c ETH: 09/02/16-13:59:50 - SHARE FOUND - (GPU 0)
13:59:50:742 2d9c send: {"id":4,"method":"eth_submitWork","params":["0x1eb2d7e0042d33f5","0xb15ba24250ed9fe5ad4e62619c67fa21f9f3047c3fef5708a7104d74cc6c6a6b","0xede8c8540ae7d3eeca3f1bc2dc6b807983970f63281cc2381f81a74d2d16c17b"]}
13:59:50:796 2d9c got 39 bytes
13:59:50:796 2d9c buf: {"jsonrpc":"2.0","id":4,"result":true}
13:59:50:796 2d9c parse packet: 38
13:59:50:797 2d9c ETH: Share accepted (62 ms)!
I have submitted 11 shares with it but non is shown by the pool that they received it - its now 1h ago.
With gnoil it instantly shown in my stats...please what happened to my shares?
From the log...
13:33:19:180 1ed4 args: -epool eth-eu1.nanopool.org:9999 -ewal 0x1873d78519d4216a1e5f5xxx -r 0 -mode 1
13:33:19:181 1ed4
ETH: 09/02/16-14:05:00 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 22.215 Mh/s, Total Shares: 11, Rejected: 0, Time: 00:31
ETH: GPU0 22.250 Mh/s
13:59:44:152 2d9c ETH: GPU0 22.106 Mh/s
13:59:50:647 14fc ETH: put share nonce 1eb2d7e0042d33f5
13:59:50:647 14fc ETH round found 1 shares
13:59:50:648 2d9c ETH: 09/02/16-13:59:50 - SHARE FOUND - (GPU 0)
13:59:50:742 2d9c send: {"id":4,"method":"eth_submitWork","params":["0x1eb2d7e0042d33f5","0xb15ba24250ed9fe5ad4e62619c67fa21f9f3047c3fef5708a7104d74cc6c6a6b","0xede8c8540ae7d3eeca3f1bc2dc6b807983970f63281cc2381f81a74d2d16c17b"]}
13:59:50:796 2d9c got 39 bytes
13:59:50:796 2d9c buf: {"jsonrpc":"2.0","id":4,"result":true}
13:59:50:796 2d9c parse packet: 38
13:59:50:797 2d9c ETH: Share accepted (62 ms)!
September 02, 2016, 08:03:54 AM
can you make it work with parity client for solo?
It works already.
Does it work with sammy007's proxy?
https://github.com/sammy007/ether-proxy
If so what is the connection string?
I cannot test solo mode. If it does not work for you for some reason, you can send me the log file. If ethminer works, my miner must work too.
Ethminer works just fine, ethminer -G -F http://192.168.0.1:8546/miner/diff/rig99
I am sure it is only about right esm and user/ pass settings. Mining straight to parity/ geth works well.
So problem is only the right syntax to connect to proxy.
-edit- problem solved, it was too easy. I wrote answer myself couple of lines above this. Have a nice weekend everyone!
Please share your command line that works, so people can see working config.
Code:
EthDcrMiner64.exe -epool http://192.168.0.1:8546/miner/diff/rigname
Where ip points to rig where you are running proxy at. Diff and rigname can be anything you like just don't touch that /miner part. No need to play with user/ pass or esm settings.
So for example
Code:
EthDcrMiner64.exe -epool http://192.168.0.177:8546/miner/20/hawaii
September 02, 2016, 07:38:38 AM
can you make it work with parity client for solo?
It works already.
Does it work with sammy007's proxy?
https://github.com/sammy007/ether-proxy
If so what is the connection string?
I cannot test solo mode. If it does not work for you for some reason, you can send me the log file. If ethminer works, my miner must work too.
Ethminer works just fine, ethminer -G -F http://192.168.0.1:8546/miner/diff/rig99
I am sure it is only about right esm and user/ pass settings. Mining straight to parity/ geth works well.
So problem is only the right syntax to connect to proxy.
-edit- problem solved, it was too easy. I wrote answer myself couple of lines above this. Have a nice weekend everyone!
Please share your command line that works, so people can see working config.
September 02, 2016, 07:16:49 AM
can you make it work with parity client for solo?
It works already.
Does it work with sammy007's proxy?
https://github.com/sammy007/ether-proxy
If so what is the connection string?
I cannot test solo mode. If it does not work for you for some reason, you can send me the log file. If ethminer works, my miner must work too.
Ethminer works just fine, ethminer -G -F http://192.168.0.1:8546/miner/diff/rig99
I am sure it is only about right esm and user/ pass settings. Mining straight to parity/ geth works well.
So problem is only the right syntax to connect to proxy.
-edit- problem solved, it was too easy. I wrote answer myself couple of lines above this. Have a nice weekend everyone!
September 02, 2016, 06:52:36 AM
can you make it work with parity client for solo?
It works already.
Does it work with sammy007's proxy?
https://github.com/sammy007/ether-proxy
If so what is the connection string?
I cannot test solo mode. If it does not work for you for some reason, you can send me the log file. If ethminer works, my miner must work too.
September 02, 2016, 06:48:51 AM
can you make it work with parity client for solo?
It works already.
Does it work with sammy007's proxy?
https://github.com/sammy007/ether-proxy
If so what is the connection string?
Jump to: