Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1145. (Read 6590565 times)

oops.. i didn't know that.  my bad, sorry - thanks for letting me know

If you press the number of gpu again it enable sia

1 time disable both
2 time enable eth
3 time enable sia

Just checked it, currently v6.4 got 6 incorrect shares and 6140 correct ones. So it's about 0.1% of incorrect shares. It is because of fast math I use in kernels, if you don't like it you can use "-etha 2" but it's about 1% slower. DAG size grows and it causes more incorrect shares, as soon as they reach about 0.5% I will use "-etha 2" by default. However, v5.3 and v6.4 must show same rate of incorrect shares on same DAG (epoch).


Oh, you can ban me from anything you want of course.
Though I'd like to know what you want anyway, it seems I overlooked something interesting, this thread is full of newbies questions and grows all the time by several pages every day. If you are a dev, you can PM me and I will try to answer your questions.

EDIT: found your question finally, my miner supports four different ETH stratum versions, check "-esm" option for that in OP:

-esm   Ethereum Stratum mode. 0 - eth-proxy mode (for example, dwarpool.com), 1 - qtminer mode (for example, ethpool.org),
   2 - miner-proxy mode (for example, coinotron.com), 3 - nicehash mode. 0 is default.

So if miner does not work with your pool, probably you use incorrect "-esm" value.

PS. While searching within your latest posts to find a message in my thread, found your nice phrase "you could dual mine without closedsource claymore shit". Thanks you are so polite

Okay your ignorance let me take the descission to ban claymore from my pool-sources, at time porting open-ethereum-pool to open-decred-pool ...
but you are out

PandaPanda!, it's a feature, rtfm. It's off, eth only, dual mining switch

It is better use the Claymore's Dual with Windows or Linux version with RX470 and RX480 in term of power/hashrate ?

I seem to have discovered a bug.

When dual mining ETH/SIA, and I disable a GPU, both ETH and SIA stop mining on that particular GPU.  However, when I re-enable the GPU, ETH starts mining again, but SIA still is in the "off" state.  Only way to remedy this is to close the miner, and re-open it.  Not a huge problem, but a pain in the ass, nonetheless.

i need to read the manual.  sorry   

just a quick heads up, press s and verify your incorrect shares.  I reverted to 5.3 because all above 6 gave me about 1% incorrect shares.  after much testing I can confirm the incorrect share problem is real with the newer versions, all else being equal.  why?  no idea, maybe claymore could look into it.  running 4 rigs, 380s, 390s, one 280x, 470s, win7 and one rig win10

Other question

What is hangs in open cl call?

Hello,

Thanks  for answer. Yes this is a new rig

So, this is a oc / psu voltage problem / driver problem? Not the gpu hardware? It mine fine for a time, in the past i mine for 2 days with out crash.

, when gpu 4 crash the rig still on but with no video signal and i can not connect to it with team viewer, is this normal? I have to manually restart o turn on.

I need to change my gpu? Or is the others problems?

I have a 1300w gold edga power supply  for 4 r9 390x and a 850w for 2 r9 390x.

seems like your are not willing to answere or overreaded the question ?

if you want to just locate it to turn down OC settings then set it to 100 % fan and then set the others to 20 % using the miner.  load the miner and watch which fan jumps in speed.  

what i would do is load up 6 instances of cdm using the -di    GPU indexes, default is all available GPUs. For example, if you have four GPUs "-di 02" will enable only first and third GPUs (#0 and #2).  so load up each one with -di of each gpu and soon enough you will find which is faulting.  and it wont crash the rest of the cards  if your lucky you can just single out -di 4 and then load one with -di 01235.  troubleshoot from there with oc etc.  once you locate the card then first off i would reset to default settings and try again.  If that still fails id check the psu voltage drop while it runs.  can cause some issues ive found.  Lastly try loading the newest drivers if this is a new rig.  have you had this running before and what version cdm.  Need a bit more info then what you provide.

Best Regards
d57heinz

Hello,

Can you tell me please how can I identify the gpu 4 in my Mobo?

14:10:45:456   9a4   ETH: GPU0 30.661 Mh/s, GPU1 30.662 Mh/s, GPU2 30.677 Mh/s, GPU3 30.678 Mh/s, GPU4 0.000 Mh/s, GPU5 30.688 Mh/s
14:10:45:894   12b8   GPU0 t=67C fan=75%, GPU1 t=71C fan=75%, GPU2 t=62C fan=75%, GPU3 t=61C fan=75%, GPU4 t=40C fan=75%, GPU5 t=69C fan=75%
14:10:45:894   12b8   em hbt: 0, fm hbt: 47,
14:10:45:894   12b8   watchdog - thread 0, hb time 109
14:10:45:894   12b8   watchdog - thread 1, hb time 15
14:10:45:894   12b8   watchdog - thread 2, hb time 109
14:10:45:894   12b8   watchdog - thread 3, hb time 15
14:10:45:894   12b8   watchdog - thread 4, hb time 109
14:10:45:894   12b8   watchdog - thread 5, hb time 15
14:10:45:894   12b8   watchdog - thread 6, hb time 109
14:10:45:894   12b8   watchdog - thread 7, hb time 15
14:10:45:894   12b8   watchdog - thread 8, hb time 61547
14:10:45:894   12b8   WATCHDOG: GPU 4 hangs in OpenCL call, exit
14:10:45:894   12b8   watchdog - thread 9, hb time 68453
14:10:45:894   12b8   WATCHDOG: GPU 4 hangs in OpenCL call, exit
14:10:45:894   12b8   watchdog - thread 10, hb time 47
14:10:45:894   12b8   watchdog - thread 11, hb time 140
14:10:46:909   12b8   Restarting OK, exit...


What can i do with this?

Thanks

Check -dri option. Default is 30. U can press - and + to increase or decrease

Checking dual hashrate to see if it's about right. I get 30 Mh/s with a R9 290 with ETH mining only. But with ETH + Sia I get about 15 Mh/s and 920 Mh/s (sia).


Does that sound about right? Windows 10 + 15.12

From OP or Readme:

-cvddc   set target GPU core voltage, multiplied by 1000. For example, "-cvddc 1050" means 1.05V. You can also specify values for every card, for example "-cvddc 900,950,1000,970". Supports latest AMD 4xx cards only in Windows.
   Note: for NVIDIA cards this option is not supported.

-mvddc   set target GPU memory voltage, multiplied by 1000. For example, "-mvddc 1050" means 1.05V. You can also specify values for every card, for example "-mvddc 900,950,1000,970". Supports latest AMD 4xx cards only in Windows.
   Note: for NVIDIA cards this option is not supported.

Hello,

i Use

Ubuntu 1604
Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v6.4
SAPPHIRE NITRO RADEON RX 470 8G

and i have test the option

-cvddc 1050
-mvddc 1050


but if i reduce the mV - nothing change on the Power Consumtion (I measure the power consumption with a calibrated electricity Watt meter)

what do i worng?

lg Martin

run it with sudo.

Could you link to your official downloads for XMR miner?    Can it be run simultaneously with your ethminer?

I don't see ways to make my XMR miner faster, but right now I test it with latest cards and in a few hours I will release new version that will detect latest cards and use best settings for them.


XMR cannot be added to ETH dual miner as the second coin, though in theory it could be added instead of ETH, i.e. as first coin.
I will check LBRY and some other coins very soon.