I have 6 1070's on a rig with h81 pro btc and g1820. After 15-30min the cpu goes to 100% and the rig becomes unresponsive. Some of the cards start mining with 4-5mh and I start to get rejected shares. I'm using MSI AB to overclock my cards. Task manager reports System, System interrupts, EthDcrMiner64.exe or MSI AB maxing out the cpu.
https://i.imgur.com/eajKQYu.png
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 115. (Read 6590757 times)
June 09, 2019, 05:20:06 PM
June 09, 2019, 02:56:05 PM
Hi there,
I have an issue regarding my Vega 64 rig.
It has 6x Gigabyte Vega 64 Gaming OC 8GB with Samsung memory.
As soon as i enable "-strap 1" it crash and reboot.
If i try to use "-strap VEG8S1" i get the error "1015".
I tried with different drivers (18.6.1,19.4.3 and 19.5.2) but it get always the same result.
What is the right nomenclature for Vega straps?
Any advice?
Thanks!
I have an issue regarding my Vega 64 rig.
It has 6x Gigabyte Vega 64 Gaming OC 8GB with Samsung memory.
As soon as i enable "-strap 1" it crash and reboot.
If i try to use "-strap VEG8S1" i get the error "1015".
I tried with different drivers (18.6.1,19.4.3 and 19.5.2) but it get always the same result.
What is the right nomenclature for Vega straps?
Any advice?
Thanks!
June 09, 2019, 02:32:15 PM
Hello friends. I have h110 pro btc+ and 8 cards rx588. Claymore 14.6 and driver 19.5.2-june3. Windows10x64 is in test and uefi mode, the miner is launched with admin priv., and when try to apply the straps, the system immediately restarts. Secure boot in bios is disabled. Who has the same problem? Without straps and boosts everything works fine. Is this a board problem or what other settings are needed in the BIOS?
ps. on mb TB250-BTC PRO and 12gpu 588 and same conf work fine with straps and boosts.
ps. on mb TB250-BTC PRO and 12gpu 588 and same conf work fine with straps and boosts.
June 09, 2019, 11:07:06 AM
Hello people, recommended -straps and -rxboost settings for RX-GTX and RX-R9 mixed rigs, thx for your help.
June 09, 2019, 06:30:05 AM
I have Sapphire Pulse RX 570 4GB Hynix/Elpida.
Using HiveOS with 1150 Core, 2200 Mem, 950mv, (rxboost 30, 55, 75, 100).
Tried everything, 10 different BIOS mods, I even made one click timing patch with Polaris, tried windows (compute mode) hashrate is 26.6 and that is it!
That happens on 4 same model cards, same settings. I bought them used. The guy that sold them said that he was getting around 30 mhs (before this new version of claymore) with that same BIOS.
Please someone help me.
Thanks!
Using HiveOS with 1150 Core, 2200 Mem, 950mv, (rxboost 30, 55, 75, 100).
Tried everything, 10 different BIOS mods, I even made one click timing patch with Polaris, tried windows (compute mode) hashrate is 26.6 and that is it!
That happens on 4 same model cards, same settings. I bought them used. The guy that sold them said that he was getting around 30 mhs (before this new version of claymore) with that same BIOS.
Please someone help me.
Thanks!
I have same cards try 1160C 2075M on 850~875 with rxboost 30
Cards are on PBE OCP BIOS and i get 31.5 on each card
Set fans to 75% I think your cards a throttling
June 09, 2019, 04:30:11 AM
I have Sapphire Pulse RX 570 4GB Hynix/Elpida.
Using HiveOS with 1150 Core, 2200 Mem, 950mv, (rxboost 30, 55, 75, 100).
Tried everything, 10 different BIOS mods, I even made one click timing patch with Polaris, tried windows (compute mode) hashrate is 26.6 and that is it!
That happens on 4 same model cards, same settings. I bought them used. The guy that sold them said that he was getting around 30 mhs (before this new version of claymore) with that same BIOS.
Please someone help me.
Thanks!
You should decrease memory clock to 2020-2050. For elpida memory 2200 it's too much Using HiveOS with 1150 Core, 2200 Mem, 950mv, (rxboost 30, 55, 75, 100).
Tried everything, 10 different BIOS mods, I even made one click timing patch with Polaris, tried windows (compute mode) hashrate is 26.6 and that is it!
That happens on 4 same model cards, same settings. I bought them used. The guy that sold them said that he was getting around 30 mhs (before this new version of claymore) with that same BIOS.
Please someone help me.
Thanks!
June 09, 2019, 12:42:08 AM
To those having problems disabling test mode, creating a bat file that includes -driver uninstall and running it works for me after restarting.
June 09, 2019, 12:15:57 AM
and for me it was so. the solution for me: open windows powershell (administrator) you enter : " bcdedit -set TESTSIGNING off ".this deactivates the test mode. restart the computer and start claymore.the program shows a red sign that it is not in test mode and restarts again. it should be fine now
June 08, 2019, 11:58:25 PM
I'm facing a really weird issue. secure boot is disabled and test mode enabled. widows keep blocking claymore driver install. sometimes it installs but asa i restart windows straps revert to stock and even claymore shows that timings is applied hashrate is the same when using stock straps. tried ddu, fresh windows, at least tree driver versions but issue remain. my rig has 13 Polaris cards mixed vendors and versions.
June 07, 2019, 05:13:10 PM
How do I get windows out of test mode, when not running claymore?
Please use Google for general questions.
https://www.google.com/search?q=turn+off+windows+test+mode
June 07, 2019, 05:10:08 PM
I have 3gb and 6gb Nvidia cards (P106-90 and P106-100). Try to use the 3gb ones to mine UBQ and 6gb ones to mine ETC. Once I open a second session to mine the other coin, the program always shows "driver is in use" and won't apply the mining straps for the second session. How to fix this?
Get one miner for 6 gig cards and one miner for 3 gig cards. Not a good idea to mix and match cards and algorithms too much.
June 07, 2019, 04:04:24 PM
This is amazing. I love using this Claymore. Easy to set up and very stable.
June 07, 2019, 12:31:55 PM
On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6
cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1
The above works correctly and go from 30.5mh to 31.5mh
Trying the straps 0,1...7 @2200 just crashes the rig
They are all hynix except 1 is micron
Any suggestions on what to try to stop the crashing?
I.tried just strap 1,with the same crashing
cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1
The above works correctly and go from 30.5mh to 31.5mh
Trying the straps 0,1...7 @2200 just crashes the rig
They are all hynix except 1 is micron
Any suggestions on what to try to stop the crashing?
I.tried just strap 1,with the same crashing
if you said without strap you already got 31.5mh then I believe you already flashed your bios.
in order to use strap you need to restore to original bios.
Interesting. I would have thought the on the fly straps would override whatever straps there were..
Anyone had Any luck on figuring this one out yet?
Try to lower the VRAM frequency normally you will earn the loss of hasrate with the -strap option. Same problem from my side with RX470, I lower the VRAM frequency to apply the -strap option before I had blue screen.
Are you saying, set the timings to stock (no overclocking) and then try the strap setting?
Let me give it another go or two
{Edit}
By turning off strap to all but the first GPU, it applies the timings to the first GPU no problem. I can only guess it has an issue with GPU1 - Is there a possibility the BIOS says hynix memory, but is actually something else? Could I have flashed the wrong memory type over the BIOS? I will flip the switch later and check.
I did note that the hashrate dropped with the new timings by .5mh/s on the one that had timings set..not sure if I have better timings or something else is going on
June 07, 2019, 12:26:52 PM
On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6
cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1
The above works correctly and go from 30.5mh to 31.5mh
Trying the straps 0,1...7 @2200 just crashes the rig
They are all hynix except 1 is micron
Any suggestions on what to try to stop the crashing?
I.tried just strap 1,with the same crashing
cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1
The above works correctly and go from 30.5mh to 31.5mh
Trying the straps 0,1...7 @2200 just crashes the rig
They are all hynix except 1 is micron
Any suggestions on what to try to stop the crashing?
I.tried just strap 1,with the same crashing
if you said without strap you already got 31.5mh then I believe you already flashed your bios.
in order to use strap you need to restore to original bios.
Interesting. I would have thought the on the fly straps would override whatever straps there were..
Anyone had Any luck on figuring this one out yet?
Try to lower the VRAM frequency normally you will earn the loss of hasrate with the -strap option. Same problem from my side with RX470, I lower the VRAM frequency to apply the -strap option before I had blue screen.
Are you saying, set the timings to stock (no overclocking) and then try the strap setting?
June 07, 2019, 11:19:15 AM
On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6
cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1
The above works correctly and go from 30.5mh to 31.5mh
Trying the straps 0,1...7 @2200 just crashes the rig
They are all hynix except 1 is micron
Any suggestions on what to try to stop the crashing?
I.tried just strap 1,with the same crashing
cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1
The above works correctly and go from 30.5mh to 31.5mh
Trying the straps 0,1...7 @2200 just crashes the rig
They are all hynix except 1 is micron
Any suggestions on what to try to stop the crashing?
I.tried just strap 1,with the same crashing
if you said without strap you already got 31.5mh then I believe you already flashed your bios.
in order to use strap you need to restore to original bios.
Interesting. I would have thought the on the fly straps would override whatever straps there were..
Anyone had Any luck on figuring this one out yet?
Try to lower the VRAM frequency normally you will earn the loss of hasrate with the -strap option. Same problem from my side with RX470, I lower the VRAM frequency to apply the -strap option before I had blue screen.
Are you saying, set the timings to stock (no overclocking) and then try the strap setting?
June 07, 2019, 10:45:14 AM
How do I get windows out of test mode, when not running claymore?
I think you can restore Secure Boot in the bios and that takes it out of test mode.
If all you're doing is mining on that computer or rig, then it probably isn't an issue to leave it in test mode.
to get into test mode, open a CMD window with admin permissions and entering:
Quote
bcdedit /set testsigning on
If you see a message saying the value is “protected by Secure Boot policy”, that means Secure Boot is enabled in your computer’s UEFI firmware. You’ll need to disable Secure Boot in your computer’s UEFI firmware (BIOS) to enable test signing mode.
To leave test mode, open a Command Prompt window as Administrator once again and run the following command:
Quote
bcdedit /set testsigning off
June 07, 2019, 09:18:00 AM
On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6
cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1
The above works correctly and go from 30.5mh to 31.5mh
Trying the straps 0,1...7 @2200 just crashes the rig
They are all hynix except 1 is micron
Any suggestions on what to try to stop the crashing?
I.tried just strap 1,with the same crashing
cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1
The above works correctly and go from 30.5mh to 31.5mh
Trying the straps 0,1...7 @2200 just crashes the rig
They are all hynix except 1 is micron
Any suggestions on what to try to stop the crashing?
I.tried just strap 1,with the same crashing
if you said without strap you already got 31.5mh then I believe you already flashed your bios.
in order to use strap you need to restore to original bios.
Interesting. I would have thought the on the fly straps would override whatever straps there were..
Anyone had Any luck on figuring this one out yet?
Try to lower the VRAM frequency normally you will earn the loss of hasrate with the -strap option. Same problem from my side with RX470, I lower the VRAM frequency to apply the -strap option before I had blue screen.
June 07, 2019, 08:53:37 AM
On my asrock h110, win10 home, 8x rx580 nitro+ 8gb I am running the following config for 14.6
cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1
The above works correctly and go from 30.5mh to 31.5mh
Trying the straps 0,1...7 @2200 just crashes the rig
They are all hynix except 1 is micron
Any suggestions on what to try to stop the crashing?
I.tried just strap 1,with the same crashing
cclock 1150, mclock 2200, cvddc 850 mvddc 875 rxboost 1
The above works correctly and go from 30.5mh to 31.5mh
Trying the straps 0,1...7 @2200 just crashes the rig
They are all hynix except 1 is micron
Any suggestions on what to try to stop the crashing?
I.tried just strap 1,with the same crashing
if you said without strap you already got 31.5mh then I believe you already flashed your bios.
in order to use strap you need to restore to original bios.
Interesting. I would have thought the on the fly straps would override whatever straps there were..
Anyone had Any luck on figuring this one out yet?
June 07, 2019, 04:33:32 AM
How do I get windows out of test mode, when not running claymore?
I think you can restore Secure Boot in the bios and that takes it out of test mode.
If all you're doing is mining on that computer or rig, then it probably isn't an issue to leave it in test mode.
June 07, 2019, 04:05:25 AM
@Claymore: Dual mining ETH + VBK is still not possible with AMD cards, right?
Hi, what about dual mining ETH + PASC?
Anyone here mining that way?
I try to ming ETH (https://ethermine.org/) and PASC (https://pasc.nanopool.org/help), but claymore get a lot of rejected/invalid/stale shares (don't remember exactly).
Could anyone can send me correct mining config with these pools above or suggest other pool (PASC) to mine?
Thanks.
Pascal has a new, CPU only algo. Old algo is useless now
Jump to: