Author

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 116. (Read 6590565 times)

newbie
Activity: 1
Merit: 0
@Claymore: Dual mining ETH + VBK is still not possible with AMD cards, right?

Hi, what about dual mining ETH + PASC?
Anyone here mining that way?
I try to ming ETH (https://ethermine.org/) and PASC (https://pasc.nanopool.org/help), but claymore get a lot of rejected/invalid/stale shares (don't remember exactly).

Could anyone can send me correct mining config with these pools above or suggest other pool (PASC) to mine?

Thanks.
jr. member
Activity: 155
Merit: 6
How do I get windows out of test mode, when not running claymore?
newbie
Activity: 45
Merit: 0
I have 3gb and 6gb Nvidia cards (P106-90 and P106-100). Try to use the 3gb ones to mine UBQ and 6gb ones to mine ETC. Once I open a second session to mine the other coin, the program always shows "driver is in use" and won't apply the mining straps for the second session. How to fix this?

You cannot use -strap option in two sessions,  you could try to add straps on first session to all cards and mine UBQ and then stop 6gb
cards and then start second session and start mining with 6gb cards only, not sure if this will work.

That works for me! Thanks for the suggestion Smiley
newbie
Activity: 76
Merit: 0
@Claymore: Dual mining ETH + VBK is still not possible with AMD cards, right?
newbie
Activity: 26
Merit: 0
I will try with a new fresh Windows. I tried everything and nothing
newbie
Activity: 3
Merit: 0
"Failed, you must run miner with admin rights."

I made everything but still - "Failed, you must run miner with admin rights."...

Right click on EthDcrMiner64.exe and "Run this program us administrator" is on. "Change settings for all users" is on too...
I have a bat file and I am trying to run it us admin - Run us administrator...
User account control - never notify...
My user is administrator...

And still "Failed, you must run miner with admin rights."

Where is the problem, please...

Try to start your bat via command prompt as admin.

cmd-> rightclick -> run as admin

type: cd C:\YOUR_PATH\Claymore Folder

type: start YOUR_BAT_NAME.bat

newbie
Activity: 26
Merit: 0
I am in Test Mode, "Secure Boot" is  disable  and still the same
full member
Activity: 616
Merit: 167
"Failed, you must run miner with admin rights."

I made everything but still - "Failed, you must run miner with admin rights."...

Right click on EthDcrMiner64.exe and "Run this program us administrator" is on. "Change settings for all users" is on too...
I have a bat file and I am trying to run it us admin - Run us administrator...
User account control - never notify...
My user is administrator...

And still "Failed, you must run miner with admin rights."

Where is the problem, please...

Further detail will be in the Readme. But in short, if you have windows, you need to disable Secure Boot and run the computer in Test Mode.

I had the same issue, it is a bit convoluted but there is a guide in the Readme that allows you to run the miner as the administrator.
newbie
Activity: 26
Merit: 0
"Failed, you must run miner with admin rights."

I made everything but still - "Failed, you must run miner with admin rights."...

Right click on EthDcrMiner64.exe and "Run this program us administrator" is on. "Change settings for all users" is on too...
I have a bat file and I am trying to run it us admin - Run us administrator...
User account control - never notify...
My user is administrator...

And still "Failed, you must run miner with admin rights."

Where is the problem, please...
DrX
member
Activity: 233
Merit: 20
I have 3gb and 6gb Nvidia cards (P106-90 and P106-100). Try to use the 3gb ones to mine UBQ and 6gb ones to mine ETC. Once I open a second session to mine the other coin, the program always shows "driver is in use" and won't apply the mining straps for the second session. How to fix this?

You cannot use -strap option in two sessions,  you could try to add straps on first session to all cards and mine UBQ and then stop 6gb
cards and then start second session and start mining with 6gb cards only, not sure if this will work.
newbie
Activity: 45
Merit: 0
I have 3gb and 6gb Nvidia cards (P106-90 and P106-100). Try to use the 3gb ones to mine UBQ and 6gb ones to mine ETC. Once I open a second session to mine the other coin, the program always shows "driver is in use" and won't apply the mining straps for the second session. How to fix this?
member
Activity: 82
Merit: 11
ok thanks. Is working with command line.
Is
Code:
ALLCOINS: 1,
recognised by epools.txt ? It is set in my epools.txt on that pool but seems to be ignored.

-allcoins is global option so you cannot set it per pool in epools.txt, it must be used only in command line or in config.txt.

alright .. thanks!
donator
Activity: 1610
Merit: 1325
Miners developer
ok thanks. Is working with command line.
Is
Code:
ALLCOINS: 1,
recognised by epools.txt ? It is set in my epools.txt on that pool but seems to be ignored.

-allcoins is global option so you cannot set it per pool in epools.txt, it must be used only in command line or in config.txt.
member
Activity: 82
Merit: 11
@Claymore
i'm trying to run v14.6 against my testpool ( ropsten network ) but doesn't work

Code:
...
15:16:38:510 a9ff3700 Probably you are trying to mine Ethereum fork. Please specify "-allcoins 1" or "-allpools 1" option. Check "Readme" file for details.
...

If you want to mine some ETH fork, always specify "-allcoins 1", it will work in all versions. If you don't do it, it may work in some old versions and won't work in recent versions.

ok thanks. Is working with command line.
Is
Code:
ALLCOINS: 1,
recognised by epools.txt ? It is set in my epools.txt on that pool but seems to be ignored.

donator
Activity: 1610
Merit: 1325
Miners developer
@Claymore
i'm trying to run v14.6 against my testpool ( ropsten network ) but doesn't work

Code:
...
15:16:38:510 a9ff3700 Probably you are trying to mine Ethereum fork. Please specify "-allcoins 1" or "-allpools 1" option. Check "Readme" file for details.
...

If you want to mine some ETH fork, always specify "-allcoins 1", it will work in all versions. If you don't do it, it may work in some old versions and won't work in recent versions.
member
Activity: 82
Merit: 11
@Claymore

i'm trying to run v14.6 against my testpool ( ropsten network ) but doesn't work

Code:
15:16:38:498 a9ff3700 ETH: Stratum - connecting to '10.0.0.26' <10.0.0.26> port 3073 (unsecure)
15:16:38:499 a9ff3700 sent: {"id": 1, "method": "mining.subscribe", "params": ["MinerName/1.0.0", "EthereumStratum/1.0.0"]}
15:16:38:499 a9ff3700 sent: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
15:16:38:499 a9ff3700 sent: {"id": 2, "method": "mining.authorize", "params": ["0x95BceE412F075A528x46767F8aA5A9e28D7AEd25","x"]}
15:16:38:499 a9ff3700 ETH: Stratum - Connected (10.0.0.26:3073) (unsecure)
15:16:38:509 a9ff3700 buf: {"result":[["mining.notify","0HLN9MS76RPEB","EthereumStratum/1.0.0"],"5e6e"],"error":null,"id":1}
{"result":false,"error":{"code":20,"message":"not supported","data":null},"id":5}
{"result":true,"error":null,"id":2}
{"jsonrpc":"2.0","method":"mining.set_difficulty","params":[0.93],"id":null}
{"jsonrpc":"2.0","method":"mining.notify","params":["0000002c","c906fa38eca6c8a38bb932db61ca31b42792bf61ccc7603c4709315e71744ae5","6d3e225102950af7638fec08410662faf16e2534c1d611cb5f9e390728cbc10b",true],"id":null}
15:16:38:509 a9ff3700 remove first packet 408
15:16:38:510 a9ff3700 remove first packet 327
15:16:38:510 a9ff3700 ETH: Authorized
15:16:38:510 a9ff3700 remove first packet 291
15:16:38:510 a9ff3700 remove first packet 214
15:16:38:510 a9ff3700 epoch #191
15:16:38:510 a9ff3700 Probably you are trying to mine Ethereum fork. Please specify "-allcoins 1" or "-allpools 1" option. Check "Readme" file for details.
15:16:38:510 a9ff3700 Pool sent wrong data, cannot set epoch, disconnect
15:16:38:510 a9ff3700 ETH: Connection lost, retry in 20 sec...
15:16:38:598 1fd7740 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
15:16:38:598 1fd7740 ETH: nicehash stratum mode


v12 version works without a problem on same testpool

Code:
15:09:34:985 78ff9700 ETH: Stratum - connecting to '10.0.0.26' <10.0.0.26> port 3073 (unsecure)
15:09:34:986 78ff9700 sent: {"id": 1, "method": "mining.subscribe", "params": ["MinerName/1.0.0", "EthereumStratum/1.0.0"]}
15:09:34:986 78ff9700 sent: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
15:09:34:986 78ff9700 sent: {"id": 2, "method": "mining.authorize", "params": ["0x95BceE412F075A528x46767F8aA5A9e28D7AEd25","x"]}
15:09:34:986 78ff9700 ETH: Stratum - Connected (10.0.0.26:3073) (unsecure)
15:09:35:129 78ff9700 buf: {"result":[["mining.notify","0HLN9MS76RPEA","EthereumStratum/1.0.0"],"5e6d"],"error":null,"id":1}
15:09:35:140 78ff9700 buf: {"result":false,"error":{"code":20,"message":"not supported","data":null},"id":5}
{"result":true,"error":null,"id":2}
15:09:35:140 78ff9700 remove first packet 36
15:09:35:140 78ff9700 ETH: Authorized
15:09:35:150 78ff9700 buf: {"jsonrpc":"2.0","method":"mining.set_difficulty","params":[0.93],"id":null}
{"jsonrpc":"2.0","method":"mining.notify","params":["00000001","c906fa38eca6c8a38bb932db61ca31b42792bf61ccc7603c4709315e71744ae5","becb7a52c410c81ad506d3fcedd1b45b7022cd68466ab8c1f5c990860d90b12f",true],"id":null}
15:09:35:150 78ff9700 remove first packet 214
15:09:35:153 a115d700 Setting DAG epoch #191...
15:09:37:810 a115d700 Setting DAG epoch #191 for GPU0
15:09:42:934 78ff9700 buf: {"jsonrpc":"2.0","method":"mining.notify","params":["00000002","c906fa38eca6c8a38bb932db61ca31b42792bf61ccc7603c4709315e71744ae5","3379398437be2c6ce263844f86288b00a740af551488edbc84b79ce7f3a7bca7",true],"id":null}
15:09:42:934 78ff9700 ETH: 06/05/19-15:09:42 - New job from 10.0.0.26:3073
15:09:42:936 78ff9700 target: 0x000000011343bdef (diff: 3994MH), epoch 191(2.49GB)
15:09:42:936 78ff9700 gpu #2 dt 3.14 (1%, good)
15:09:42:936 78ff9700 ETH - Total Speed: 0.000 Mh/s, Total Shares: 17, Rejected: 0, Time: 00:05
15:09:42:936 78ff9700 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s
15:09:48:923 78ff9700 buf: {"jsonrpc":"2.0","method":"mining.notify","params":["00000003","c906fa38eca6c8a38bb932db61ca31b42792bf61ccc7603c4709315e71744ae5","b210d4586d3fe34f0a0fa6472fe3995838e2129541341b3dbbc10a758ea47f77",true],"id":null}
15:09:48:925 78ff9700 ETH: 06/05/19-15:09:48 - New job from 10.0.0.26:3073
15:09:48:925 78ff9700 target: 0x000000011343bdef (diff: 3994MH), epoch 191(2.49GB)
sr. member
Activity: 519
Merit: 250
Hi,

Need help with Rx 580 8Gb moded I ve got 32 Mhs on eth with blockchain drivers but when I want to update them at 18.6 , 19.4 I get only 11.5 Mhs any ideas how to fix this.

Thx in advance

You need to switch GPU Workload to Compute in Radeon settings, if you are running with newer drivers.

Thx ,it worked!
member
Activity: 277
Merit: 23
This is where it makes sense now. It seems you want to run your memory at 2185Mhz but your memory is 8GB. I was referring to the poster who tried to run his 4GB memory at 2200Mhz which is not possible.

The RX 470/570 and RX 480/580 if it has 4GB of GDDR you can't run it at 2200Mhz whether Hynix or Samsung.

The RX 470/570/480/580 8GB you can usually run at 2100-2200Mhz or so without issues and get something like 31MH/s.

This was more of an example how to achieve higher clocks, I agree that 4Gb cards can't reach 2200 (at least not stable). Best i could get on 4Gb Samsung is 2150 and majority of cards couldn't handle that frequency.

I have a mix of a mentioned approach, tight straps = lower frequency, loos strap = higher frequency  but in general they achieve same results
newbie
Activity: 3
Merit: 0
Hi,

Need help with Rx 580 8Gb moded I ve got 32 Mhs on eth with blockchain drivers but when I want to update them at 18.6 , 19.4 I get only 11.5 Mhs any ideas how to fix this.

Thx in advance

You need to switch GPU Workload to Compute in Radeon settings, if you are running with newer drivers.
sr. member
Activity: 519
Merit: 250
Hi,

Need help with Rx 580 8Gb moded I ve got 32 Mhs on eth with blockchain drivers but when I want to update them at 18.6 , 19.4 I get only 11.5 Mhs any ideas how to fix this.

Thx in advance
Jump to: