Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1238.

pikachuy

sr. member

Activity: 544

Merit: 250

Quote from: adaseb on July 08, 2016, 06:39:45 PM

Seems its a ratio of 15x for SC speed.

If your ETH miner is 20MH/s then your SC will be 300MH/s

Im surprised how the dual mining SC doesn't slow down ETH mining speed at all.

Do you happen to know about power draw / heat increases with eth+sia compared to just eth mining only?

mineromineroso

newbie

Activity: 33

Merit: 0

Anyone with a rx480 tried to increase memory clock beyond 2250Mhz? The Stilt released this that seems to allow -> http://www.overclock.net/t/1604979/a-temporary-fix-for-the-excess-pci-e-slot-power-draw-for-the-reference-rx-480-cards/110#post_25324219

I tried but without lucky for more than 2270Mhz Cry

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

Quote from: fittsy on July 08, 2016, 06:42:28 PM

Quote from: adaseb on July 08, 2016, 06:39:45 PM

Seems its a ratio of 15x for SC speed.

If your ETH miner is 20MH/s then your SC will be 300MH/s

Im surprised how the dual mining SC doesn't slow down ETH mining speed at all.

See my post above yours. It does slow down one of my rigs. Slows down ETH by 5%.

My rigs seems to be slower by only 0.5%

fittsy

sr. member

Activity: 441

Merit: 252

Quote from: adaseb on July 08, 2016, 06:39:45 PM

Seems its a ratio of 15x for SC speed.

If your ETH miner is 20MH/s then your SC will be 300MH/s

Im surprised how the dual mining SC doesn't slow down ETH mining speed at all.

See my post above yours. It does slow down one of my rigs. Slows down ETH by 5%.

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

Seems its a ratio of 15x for SC speed.

If your ETH miner is 20MH/s then your SC will be 300MH/s

Im surprised how the dual mining SC doesn't slow down ETH mining speed at all.

fittsy

sr. member

Activity: 441

Merit: 252

Quote from: Claymore on July 08, 2016, 10:33:08 AM

v5.0 Beta:

- added new coin for dual mode: Siacoin. Now you can mine Ethereum, Ethereum+Decred or Ethereum+Siacoin.
- added "-dcoin" option to select a coin for dual mode.
- added "-allcoins exp" option value that allows you to mine Expanse and don't recreate DAG for devfee mining.
- added Decred support for Nicehash pool.
- default "-dcrt" option value is "5" now.
- improved detection of bad pool state: miner will disconnect if pool rejected more than a half of last 10 shares.
- "s" key: now miner also shows current difficulty so you can calculate how long it will take to find a share or a block.
- bug fixes.

Mining Siacoin seems to slow down one of my rigs by 5% ETH and the hashrate for Siacoin seems 30% slower than another rig. The main difference is one rig only has 4GB cards. The other has a mix of 2 and 4GB.

Curious to know if anyone else has a similar issue with 2 GB cards.

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

There are no balances shown because the pool hasn't found a block yet most likely.

navydude

sr. member

Activity: 283

Merit: 250

Quote from: fittsy on July 08, 2016, 06:00:18 PM

Quote from: navydude on July 08, 2016, 05:54:07 PM

Still waiting. No balance yet. should be running over 6.5gh but only showing 1.2gh IDK Huh

Double checked miners look good and hashing just fine. 129.7mh on ETH and 1946mh on SIA with 380x cards.

Edit: Now showing correct speed at 9.2gh but still waiting on balance.

http://sia.nanopool.org/account/f72b87f1f7718c0600826e2625f5db392f3f1e2de5c42e3e7d0ed0cbf8ff97035036702347a0

Has anyone submitted a support request to the pool owners to see if they are aware of this?

I Have not only because of the posting on the site that says its beta.

fittsy

sr. member

Activity: 441

Merit: 252

Quote from: navydude on July 08, 2016, 05:54:07 PM

Still waiting. No balance yet. should be running over 6.5gh but only showing 1.2gh IDK Huh

Double checked miners look good and hashing just fine. 129.7mh on ETH and 1946mh on SIA with 380x cards.

Edit: Now showing correct speed at 9.2gh but still waiting on balance.

http://sia.nanopool.org/account/f72b87f1f7718c0600826e2625f5db392f3f1e2de5c42e3e7d0ed0cbf8ff97035036702347a0

Has anyone submitted a support request to the pool owners to see if they are aware of this?

fraggyb

full member

Activity: 238

Merit: 100

Quote from: Balgun on July 08, 2016, 05:35:39 PM

Quote from: navydude on July 08, 2016, 04:43:21 PM

Quote from: fittsy on July 08, 2016, 04:37:51 PM

Quote from: navydude on July 08, 2016, 04:14:57 PM

Is anyone showing a balance on nano pool for SIA?

According to the notes on the top of the sia.nanopool page...

Quote

Pool is in BETA Test mode.
Use it on your own risk. Payments can be delayed. Account balances can be inaccurate.
Thank you for your patience.

Yeah I seen that was just wondering its been 3 hours and still ZERO balance. Ill just wait it out i guess. Are there any other pools?

Nanopool is showing balances for me now. Seems like it started collecting shares at 11:20pm CET+1 (15 mins ago)for me, even though it was mining longer.

Hmm not showing for me, have been mining for 6 hours now. Reported hashrate shows 0 as well, although current and average are correct.

navydude

sr. member

Activity: 283

Merit: 250

Still waiting. No balance yet. should be running over 6.5gh but only showing 1.2gh IDK Huh

Double checked miners look good and hashing just fine. 129.7mh on ETH and 1946mh on SIA with 380x cards.

Edit: Now showing correct speed at 8.2gh but still waiting on balance.

http://sia.nanopool.org/account/f72b87f1f7718c0600826e2625f5db392f3f1e2de5c42e3e7d0ed0cbf8ff97035036702347a0

Balgun

newbie

Activity: 8

Merit: 0

Quote from: navydude on July 08, 2016, 04:43:21 PM

Quote from: fittsy on July 08, 2016, 04:37:51 PM

Quote from: navydude on July 08, 2016, 04:14:57 PM

Is anyone showing a balance on nano pool for SIA?

According to the notes on the top of the sia.nanopool page...

Quote

Pool is in BETA Test mode.
Use it on your own risk. Payments can be delayed. Account balances can be inaccurate.
Thank you for your patience.

Yeah I seen that was just wondering its been 3 hours and still ZERO balance. Ill just wait it out i guess. Are there any other pools?

Nanopool is showing balances for me now. Seems like it started collecting shares at 11:20pm CET+1 (15 mins ago)for me, even though it was mining longer.

Moonbyte1984

full member

Activity: 144

Merit: 100

Quote from: Claymore on July 08, 2016, 05:00:04 PM

Quote from: ?? on ??

Quote from: Claymore on July 08, 2016, 04:53:07 PM

Quote from: Moonbyte1984 on July 08, 2016, 04:40:25 PM

Claymore please add ability to mine on sammy007 proxy for solo
Now your miner can't mine solo on address like xx.xx.xx.xx:8080/miner/200/01 only on xx.xx.xx.xx:8080
Cry

I need to see command line that demostrates that it worked in 4.x but does not work now.

It is never work

Then why you write "Now your miner can't mine solo" if it never worked?

I tested, miner down on try to create DAG (only in solo, on stratum all fine)
Setting DAG epoch #10 (I mine EXP) and then crash

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

From the other thread that i posted and what was said earlier.

When you mine Sia solo, Diff is about 4000000GH. So if your mining speed is 1GH/s you will solve blocks every 4000000 seconds (about 46 days), in average.

So for that 380 posted earlier, it would take about 153 days to find a block with that single 380 GPU.

Block reward is like 240745 coins according to block explorer so with a price of 105 Sats you would get 0.25 BTC in profit.

So 0.25/153=0.00163398 BTC per day.

So far its worth the gains for the time being, but after a week or two probably won't be worth it anymore.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: fittsy on July 08, 2016, 05:02:25 PM

no quotes needed

You are correct, quotes can be skipped. Though it works with them too. But if you remove quotes, it will not work in command line. In command line you have to use quotes around entire "-dpool" value if you want to specify worker.

Quote from: fittsy on July 08, 2016, 05:04:48 PM

@Claymore
Have you taken a look at the remote manager? It doesn't work with version 5.
4.6 works fine
5.0 works fine on the local machine
5.0 doesn't work for remote machines. (same ip and port numbers as 4.6)

It works for me.

fittsy

sr. member

Activity: 441

Merit: 252

@Claymore

Have you taken a look at the remote manager? It doesn't work with version 5.

4.6 works fine
5.0 works fine on the local machine
5.0 doesn't work for remote machines. (same ip and port numbers as 4.6)

fittsy

sr. member

Activity: 441

Merit: 252

Quote from: Claymore on July 08, 2016, 04:48:00 PM

3. config.dat is same as for command line:

-dpool http://sia-eu1.nanopool.org:9980/miner/header?"address=YourSiaAddress&worker=YourWorkerName"
-dcoin sia

4. dpools.txt is similar (don't forget to use -dcoin sia in command line or config.txt):

POOL: http://sia-eu1.nanopool.org:9980/miner/header?"address=YourSiaAddress&worker=YourWorkerName"

You can't have an open quotation marks in the middle of the url. That won't work. It also isn't neccessary to use quotation marks unless you're using a space in the workername or using the email string to send email alerts.

For example my config is:
-dpool http://sia-us-east1.nanopool.org:9980/miner/header?address=MySiaAddress&worker=MyWorkerName

no quotes needed

Moonbyte1984

full member

Activity: 144

Merit: 100

Quote from: Claymore on July 08, 2016, 05:00:04 PM

Quote from: ?? on ??

Quote from: Claymore on July 08, 2016, 04:53:07 PM

Quote from: Moonbyte1984 on July 08, 2016, 04:40:25 PM

Claymore please add ability to mine on sammy007 proxy for solo
Now your miner can't mine solo on address like xx.xx.xx.xx:8080/miner/200/01 only on xx.xx.xx.xx:8080
Cry

I need to see command line that demostrates that it worked in 4.x but does not work now.

It is never work

Then why you write "Now your miner can't mine solo" if it never worked?

sorry I did not test it on v5

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: ?? on ??

Quote from: Claymore on July 08, 2016, 04:53:07 PM

Quote from: Moonbyte1984 on July 08, 2016, 04:40:25 PM

Claymore please add ability to mine on sammy007 proxy for solo
Now your miner can't mine solo on address like xx.xx.xx.xx:8080/miner/200/01 only on xx.xx.xx.xx:8080
Cry

I need to see command line that demostrates that it worked in 4.x but does not work now.

It is never work

Then why you write "Now your miner can't mine solo" if it never worked?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Moonbyte1984 on July 08, 2016, 04:40:25 PM

Claymore please add ability to mine on sammy007 proxy for solo
Now your miner can't mine solo on address like xx.xx.xx.xx:8080/miner/200/01 only on xx.xx.xx.xx:8080
Cry

I need to see command line that demostrates that it worked in 4.x but does not work now.
Assume you are talking about eth and http. v4.x ignored all text after port number so if you use "http://xx.xx.xx.xx:8080/miner/200/01" it uses "http://xx.xx.xx.xx:8080". v5.0 does not ignore subaddress.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1238. (Read 6590565 times)