I'm getting crashing at startup when init the dag files. tried gser 2 to no avail. previous versions were fine.
edit: now miner crashes even though i reverted to previous working version. ah crap.
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1241. (Read 6590757 times)
July 08, 2016, 09:40:17 AM
July 08, 2016, 09:33:08 AM
v5.0 Beta:
- added new coin for dual mode: Siacoin. Now you can mine Ethereum, Ethereum+Decred or Ethereum+Siacoin.
- added "-dcoin" option to select a coin for dual mode.
- added "-allcoins exp" option value that allows you to mine Expanse and don't recreate DAG for devfee mining.
- added Decred support for Nicehash pool.
- default "-dcrt" option value is "5" now.
- improved detection of bad pool state: miner will disconnect if pool rejected more than a half of last 10 shares.
- "s" key: now miner also shows current difficulty so you can calculate how long it will take to find a share or a block.
- bug fixes.
- added new coin for dual mode: Siacoin. Now you can mine Ethereum, Ethereum+Decred or Ethereum+Siacoin.
- added "-dcoin" option to select a coin for dual mode.
- added "-allcoins exp" option value that allows you to mine Expanse and don't recreate DAG for devfee mining.
- added Decred support for Nicehash pool.
- default "-dcrt" option value is "5" now.
- improved detection of bad pool state: miner will disconnect if pool rejected more than a half of last 10 shares.
- "s" key: now miner also shows current difficulty so you can calculate how long it will take to find a share or a block.
- bug fixes.
July 08, 2016, 09:09:46 AM
hmmm that hashrate on the siapool is spiking like crazy...
July 08, 2016, 08:51:32 AM
I got access to private sia pool, so now my miner supports it as well. I will release new version in a couple of hours.
open pool
http://sia.nanopool.org/
July 08, 2016, 08:18:23 AM
@Wolf0.
You have to flash BIOS to turn down-clocking/volting on
#about SIA mining - what is profitability of this?
You have to flash BIOS to turn down-clocking/volting on
#about SIA mining - what is profitability of this?
July 08, 2016, 08:16:38 AM
I got access to private sia pool, so now my miner supports it as well. I will release new version in a couple of hours.
July 08, 2016, 08:14:55 AM
@Claymore
Can I use the last Crimson 16.X driver on my HD7970 using Windows 10 64bit ?
Any disadvantages compared to 15.12 ?
thx
Can I use the last Crimson 16.X driver on my HD7970 using Windows 10 64bit ?
Any disadvantages compared to 15.12 ?
thx
I don't test all drivers, so the only way is to install them and see if they work ok for you.
July 08, 2016, 08:09:01 AM
I have rig of 3 cards 1x370 and 2x380 fans at 100,80,80 ,clocks (m:1110 all) (gpu:1400,1450,1450) temps 65,62,62 (power limit -5,-20,-20)
so i see everything is good i keep checking my power supply (700,400) and cables (afraid it melts)
but today i was checking the gpu-z i noticed that the Vddc power not stable and flactuates too much (70-82W sometimes go 52 too) on all cards and also the Vddc current fluctuates in range of (66-74A sometimes goes to 54A)
on ethminer it was very stable. can this effect cards on long run!!!
updating drivers may enhance that unstable readings!!!
so i see everything is good i keep checking my power supply (700,400) and cables (afraid it melts)
but today i was checking the gpu-z i noticed that the Vddc power not stable and flactuates too much (70-82W sometimes go 52 too) on all cards and also the Vddc current fluctuates in range of (66-74A sometimes goes to 54A)
on ethminer it was very stable. can this effect cards on long run!!!
updating drivers may enhance that unstable readings!!!
What speeds on your 380s?
I get 21.4 from elpida 380's also, unlike the 7950 however they hash at the same speed regardless of dag size. 7950's putting out 24-28Mh/s on Exp depending on clocks, where as 380's just sit around 21.4Mh/s.
Interesting. I'm kind of surprised more people aren't downclocking for optimal hash/W.
On most of AMD cards downclocking/unedrvolting is disable
July 08, 2016, 08:08:34 AM
@Claymore
Can I use the last Crimson 16.X driver on my HD7970 using Windows 10 64bit ?
Any disadvantages compared to 15.12 ?
thx
Can I use the last Crimson 16.X driver on my HD7970 using Windows 10 64bit ?
Any disadvantages compared to 15.12 ?
thx
July 08, 2016, 08:02:48 AM
http://forum.sia.tech/topic/252/pps-pool-in-beta-testing/61
SIA pool gonna be open to public
SIA pool gonna be open to public
July 08, 2016, 07:50:47 AM
I have rig of 3 cards 1x370 and 2x380 fans at 100,80,80 ,clocks (m:1110 all) (gpu:1400,1450,1450) temps 65,62,62 (power limit -5,-20,-20)
so i see everything is good i keep checking my power supply (700,400) and cables (afraid it melts)
but today i was checking the gpu-z i noticed that the Vddc power not stable and flactuates too much (70-82W sometimes go 52 too) on all cards and also the Vddc current fluctuates in range of (66-74A sometimes goes to 54A)
on ethminer it was very stable. can this effect cards on long run!!!
updating drivers may enhance that unstable readings!!!
so i see everything is good i keep checking my power supply (700,400) and cables (afraid it melts)
but today i was checking the gpu-z i noticed that the Vddc power not stable and flactuates too much (70-82W sometimes go 52 too) on all cards and also the Vddc current fluctuates in range of (66-74A sometimes goes to 54A)
on ethminer it was very stable. can this effect cards on long run!!!
updating drivers may enhance that unstable readings!!!
What speeds on your 380s?
I get 21.4 from elpida 380's also, unlike the 7950 however they hash at the same speed regardless of dag size. 7950's putting out 24-28Mh/s on Exp depending on clocks, where as 380's just sit around 21.4Mh/s.
July 08, 2016, 07:35:51 AM
I have rig of 3 cards 1x370 and 2x380 fans at 100,80,80 ,clocks (m:1110 all) (gpu:1400,1450,1450) temps 65,62,62 (power limit -5,-20,-20)
so i see everything is good i keep checking my power supply (700,400) and cables (afraid it melts)
but today i was checking the gpu-z i noticed that the Vddc power not stable and flactuates too much (70-82W sometimes go 52 too) on all cards and also the Vddc current fluctuates in range of (66-74A sometimes goes to 54A)
on ethminer it was very stable. can this effect cards on long run!!!
updating drivers may enhance that unstable readings!!!
so i see everything is good i keep checking my power supply (700,400) and cables (afraid it melts)
but today i was checking the gpu-z i noticed that the Vddc power not stable and flactuates too much (70-82W sometimes go 52 too) on all cards and also the Vddc current fluctuates in range of (66-74A sometimes goes to 54A)
on ethminer it was very stable. can this effect cards on long run!!!
updating drivers may enhance that unstable readings!!!
What speeds on your 380s?
July 08, 2016, 06:52:04 AM
I have rig of 3 cards 1x370 and 2x380 fans at 100,80,80 ,clocks (m:1110 all) (gpu:1400,1450,1450) temps 65,62,62 (power limit -5,-20,-20)
so i see everything is good i keep checking my power supply (700,400) and cables (afraid it melts)
but today i was checking the gpu-z i noticed that the Vddc power not stable and flactuates too much (70-82W sometimes go 52 too) on all cards and also the Vddc current fluctuates in range of (66-74A sometimes goes to 54A)
on ethminer it was very stable. can this effect cards on long run!!!
updating drivers may enhance that unstable readings!!!
so i see everything is good i keep checking my power supply (700,400) and cables (afraid it melts)
but today i was checking the gpu-z i noticed that the Vddc power not stable and flactuates too much (70-82W sometimes go 52 too) on all cards and also the Vddc current fluctuates in range of (66-74A sometimes goes to 54A)
on ethminer it was very stable. can this effect cards on long run!!!
updating drivers may enhance that unstable readings!!!
July 08, 2016, 05:26:32 AM
BTW, what's the DAG file size now for Expanse? Won't this allow to mine Expanse using CDM on cards with 1GB of RAM?
Doesn't the Dag begin @ 1GB?
July 08, 2016, 04:56:45 AM
BTW, what's the DAG file size now for Expanse? Won't this allow to mine Expanse using CDM on cards with 1GB of RAM?
July 08, 2016, 04:44:29 AM
Will u do a release of other features/fixes Expanse dev fee for example, or do we have to wait for sia pool to come along?
July 08, 2016, 04:27:10 AM
v5.0 is ready, but I have to catch another block to confirm that it works properly.
We need some public pools for Siacoin.
We need some public pools for Siacoin.
No public pool for Siacoin. There is closed pool betatesting on siamining.com So why not dual mining with SIA solo?
v5.0 can dual mine with SIA solo. However, you have to have a lot of GPUs to find SIA blocks regularly. Currently diff is about 4000TH so if you have 20GH/s on SIA you will find block evey 3 days. 20GH/s requires at least 20 GPUs 290/390 even if you set "-dcri 150" which causes only 40% of normal ETH speed in dual mode. If you don't want to lose ETH hashrate you will use "-dcri 30" and it will require >50 GPUs to achieve 20GH on SIA. That's the problem.
and you can make the setting for the pool?so as not to solo mine who knows a private pool.
thank you
I have no idea if my miner works with private pools because I have no access to any private pools.
As soon as someone opens public pool I will check and adjust miner if necessary so it will work there.
July 08, 2016, 04:04:10 AM
v5.0 is ready, but I have to catch another block to confirm that it works properly.
We need some public pools for Siacoin.
We need some public pools for Siacoin.
No public pool for Siacoin. There is closed pool betatesting on siamining.com So why not dual mining with SIA solo?
v5.0 can dual mine with SIA solo. However, you have to have a lot of GPUs to find SIA blocks regularly. Currently diff is about 4000TH so if you have 20GH/s on SIA you will find block evey 3 days. 20GH/s requires at least 20 GPUs 290/390 even if you set "-dcri 150" which causes only 40% of normal ETH speed in dual mode. If you don't want to lose ETH hashrate you will use "-dcri 30" and it will require >50 GPUs to achieve 20GH on SIA. That's the problem.
and you can make the setting for the pool?so as not to solo mine who knows a private pool.
thank you
July 08, 2016, 02:07:53 AM
v5.0 is ready, but I have to catch another block to confirm that it works properly.
We need some public pools for Siacoin.
We need some public pools for Siacoin.
No public pool for Siacoin. There is closed pool betatesting on siamining.com So why not dual mining with SIA solo?
v5.0 can dual mine with SIA solo. However, you have to have a lot of GPUs to find SIA blocks regularly. Currently diff is about 4000TH so if you have 20GH/s on SIA you will find block evey 3 days. 20GH/s requires at least 20 GPUs 290/390 even if you set "-dcri 150" which causes only 40% of normal ETH speed in dual mode. If you don't want to lose ETH hashrate you will use "-dcri 30" and it will require >50 GPUs to achieve 20GH on SIA. That's the problem.
July 08, 2016, 01:34:14 AM
v5.0 is ready, but I have to catch another block to confirm that it works properly.
We need some public pools for Siacoin.
We need some public pools for Siacoin.
No public pool for Siacoin. There is closed pool betatesting on siamining.com So why not dual mining with SIA solo?
Jump to: